TXB0108PWR vs TXB0108QPWRQ1 Comparación
Comparación detallada lado a lado de TXB0108PWR por Texas Instruments y TXB0108QPWRQ1 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | TXB0108PWR | TXB0108QPWRQ1 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Logic ICs | Logic ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,26 | $0,68 |
| Bits per Channel | 8 | — |
| Canales | 8 | — |
| Translator Type | Bidirectional voltage-level translator, auto-direction sensing | — |
| A Port Voltage Range | 1.2 V to 3.6 V | — |
| B Port Voltage Range | 1.65 V to 5.5 V | — |
| Max Data Rate | 100 Mbps | — |
| ESD Protection | +/-15 kV (HBM) | — |
| Tipo de salida | Push-pull, 3-state | Push-pull, symmetrical drive |
| VCC Isolation | Yes - outputs high-impedance if either VCC at GND | — |
| Temperatura de funcionamiento | -40C to +85C | -40C to +125C |
| Encapsulado | TSSOP-20 (PW) | TSSOP-20 (PW) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Internal Series Resistance | 4 kOhm | — |
| Latch-Up Performance | Exceeds 100 mA per JESD 78, Class II | — |
| Driver Type | Push-pull (totem-pole) CMOS only; not for open-drain buses | — |
| Estado RoHS | Compliant | Compliant |
| Función | — | 8-bit bidirectional voltage-level translator |
| Port A Supply (VCCA) | — | 1.2 V to 3.6 V |
| Port B Supply (VCCB) | — | 1.65 V to 5.5 V |
| Direction Control | — | Auto-direction sensing |
| Output Enable (OE) | — | Yes, all I/O Hi-Z when low |
| ESD Protection (IEC) | — | ±15 kV (air-gap discharge) on I/O |
| Number of Channels | — | 8 |
| Automotive Qualification | — | AEC-Q100 qualified |
| Family | — | TXB |
| Corriente de alimentación | — | [DATA_NEEDED: ICC max] |
| Nivel MSL | — | [DATA_NEEDED: MSL] |