TXS0108EPWR vs TXB0108PWR Comparación
Comparación detallada lado a lado de TXS0108EPWR por Texas Instruments y TXB0108PWR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | TXS0108EPWR | TXB0108PWR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Logic ICs | Logic ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,51 | $0,26 |
| Función | 8-bit bidirectional voltage-level translator | — |
| Translator Type | Voltage Level Translator, Bidirectional, 1 Circuit, 8 Channel | Bidirectional voltage-level translator, auto-direction sensing |
| Signal Type | Open-drain and push-pull | — |
| VCCA Supply Range (A Port) | 1.2 V to 3.6 V | — |
| VCCB Supply Range (B Port) | 1.65 V to 5.5 V | — |
| Max Data Rate (Push-Pull) | 60 Mbps | — |
| Max Data Rate (Open-Drain) | 2 Mbps | — |
| Propagation Delay | 4.8 ns | — |
| Corriente en reposo | 620 uA | — |
| Direction Control | Automatic direction sensing | — |
| VCC Isolation | Yes - outputs high impedance if either VCC at GND | Yes - outputs high-impedance if either VCC at GND |
| Temperatura de funcionamiento | -40C to +85C | -40C to +85C |
| Encapsulado | TSSOP (PW), 20 pins | TSSOP-20 (PW) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 1 (260C unlimited floor life) | — |
| Estado RoHS | Compliant | Compliant |
| OE Pin | Yes - output enable, three-state outputs | — |
| Bits per Channel | — | 8 |
| Canales | — | 8 |
| A Port Voltage Range | — | 1.2 V to 3.6 V |
| B Port Voltage Range | — | 1.65 V to 5.5 V |
| Max Data Rate | — | 100 Mbps |
| ESD Protection | — | +/-15 kV (HBM) |
| Tipo de salida | — | Push-pull, 3-state |
| Internal Series Resistance | — | 4 kOhm |
| Latch-Up Performance | — | Exceeds 100 mA per JESD 78, Class II |
| Driver Type | — | Push-pull (totem-pole) CMOS only; not for open-drain buses |