A3P250-FG144 - 3K LEs, 36Kb RAM Flash FPGA | Microchip
N.º de pieza: A3P250-FG144 ✓ ActivoA3P250-FG144 Descripción general
A ProASIC3 FPGA belongs to the field-programmable gate array hierarchy within programmable logic devices and semiconductors. Unlike mask-programmable custom logic, an FPGA can be configured or reprogrammed after manufacture, allowing design changes, prototyping, field updates, and logic consolidation within one device. ProASIC3 devices are flash-based, so their configuration is retained without a separate external configuration PROM.
Key features include approximately 3K logic elements, 36 Kb of block RAM, single-chip implementation, reprogrammability, and a compact 144-lead package. These resources make the A3P250-FG144 suitable for control logic, protocol bridging, industrial interface adaptation, embedded signal processing, and general-purpose programmable digital systems. Its commercial junction-temperature rating supports equipment deployed in controlled indoor environments.
The ProASIC3 architecture places programmable logic and configurable RAM within a flash-based FPGA framework. System designers can divide the available logic and memory among parallel datapaths, state machines, control processors, and peripheral interfaces. Because configuration is stored in on-chip flash, the finished board requires fewer supporting components than a design based on a volatile FPGA and external configuration memory. Migration documentation also identifies package-level pin compatibility as a key consideration when moving between ProASIC3 density options.
Typical applications include industrial automation controllers, instrumentation, communications equipment, embedded control systems, and compact data-acquisition modules. The device is particularly appropriate when a design needs moderate logic density, on-chip RAM, field reconfiguration, and a relatively compact package. It is not intended for designs requiring the logic capacity or I/O performance of a much larger FPGA family.
Before finalizing a PCB design, verify the complete FG144 pinout, bank supply requirements, configuration behavior, and decoupling recommendations in the manufacturer datasheet. Pay particular attention to the dedicated configuration pins and I/O power requirements, and preserve the package-specific footprint and thermal design. Because a 13 × 13 mm BGA can create assembly and inspection challenges, prototype assembly should use a package-qualified process.
This page combines the manufacturer product information, family migration guidance, exact package identification, sourcing details, and practical selection considerations. It also distinguishes the target ordering code from other ProASIC3 density and package options so engineers can assess footprint compatibility before committing to a replacement or redesign.
Alternativas directas para A3P250-FG144 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con A3P250-FG144 (mismo factor de forma y huella) — difiere en Package, Configuration Memory, Device Type, Temperature Grade.
A3P250-FGG144
✅ Sustitución directaConsulte el precio
Ver hoja de datos →A3P250-FG144 Valores máximos y características eléctricas
| Device Type | ProASIC3 flash FPGA |
| Logic Elements | Approximately 3K logic elements |
| Block RAM | 36 Kb |
| Configuration Memory | On-chip flash |
| Encapsulado | 144-FPBGA |
| Package Dimensions | 13 × 13 mm |
| Lead Count | 144 leads |
| Tipo de montaje | Surface mount |
| Temperature Grade | Commercial |
| Junction Temperature Range | 0°C to 85°C |
| Reprogrammability | Yes |
| Implementation | Single-chip solution |
Guía de configuración de pines de A3P250-FG144 13 × 13 mm
Configuración de pines para A3P250-FG144 (encapsulado 13 × 13 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para A3P250-FG144.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
A3P250-FG144 es adecuado para 6 aplicacións: Industrial Automation Controllers, Protocol Bridging and Interface Conversion, Data-Acquisition and Instrumentation Modules, Embedded Communication Equipment, Embedded Control Subsystems, Programmable Logic Consolidators.
Industrial Automation Controllers
The A3P250-FG144 fits compact industrial automation controllers that coordinate sensors, actuators, interlocks, and machine-state logic. Its approximately 3K logic elements provide capacity for parallel control paths, while 36 Kb of block RAM can support event histories, communication buffers, and data tables. Flash-based configuration allows field updates without a separate configuration PROM. For deployment near machinery, the 0°C to 85°C commercial junction range should be checked against the enclosure temperature, while industrial-grade requirements should be directed to a suitably qualified ordering option.
Recomendado
Protocol Bridging and Interface Conversion
The A3P250-FG144 can bridge dissimilar serial, parallel, or legacy interfaces when a design requires flexible logic and moderate local storage. Approximately 3K logic elements are suitable for protocol state machines, data-format conversion, and handshake logic, while 36 Kb of block RAM can buffer frames or partially assembled messages. The flash-based ProASIC3 architecture permits configuration updates for field fixes. Engineers should verify the exact I/O standards, bank supply voltages, timing constraints, and FG144 pin assignments before finalizing any interface bridge.
Recomendado
Data-Acquisition and Instrumentation Modules
The A3P250-FG144 is suitable for instrumentation modules that must coordinate sampling, filtering control, status reporting, and local data handling. The approximately 3K logic elements can manage acquisition sequencing and digital signal-conditioning control, while the 36 Kb of block RAM can hold calibration tables, sample buffers, or captured test sequences. Its 144-lead package provides a defined set of programmable I/O and dedicated configuration and power pins. Confirm the package pinout, supported I/O voltage ranges, and acquisition timing in the ProASIC3 documentation before schematic capture.
Recomendado
Embedded Communication Equipment
The A3P250-FG144 can support compact communication equipment that requires programmable framing, control, filtering, and protocol adaptation. Its 36 Kb of block RAM provides space for packet buffers and message descriptors, while approximately 3K logic elements can implement finite-state machines, CRC processing, flow control, and supervisory logic. Flash-based configuration is useful for equipment that may receive field revisions. Select the device only after checking the required I/O rate, clock sources, memory interfaces, power rails, and timing margins against the manufacturer data sheets.
Recomendado
Embedded Control Subsystems
The A3P250-FG144 can act as a dedicated embedded control subsystem when a larger system benefits from a separate programmable state machine. Approximately 3K logic elements are appropriate for sequencing, timing, command decoding, and supervisory functions, while 36 Kb of block RAM can hold operating modes, counters, or small lookup tables. Its single-chip flash-based implementation reduces the need for external nonvolatile configuration storage. Partition the device carefully, reserve configuration pins correctly, and validate every supply domain and I/O assignment against the FG144 package documentation.
Recomendado
Programmable Logic Consolidators
The A3P250-FG144 is useful when several small programmable functions can be consolidated into one compact device. Approximately 3K logic elements and 36 Kb of block RAM can replace multiple simple glue-logic or fixed-function sections while preserving reprogrammability. This is especially helpful for revisions that alter control sequences or optional interfaces. Consolidation should account for routing, timing, I/O demand, configuration overhead, and thermal performance. Because the target uses a 13 × 13 mm 144-FPBGA package, the PCB and assembly process must support fine-pitch BGA inspection and soldering.
Recomendado
Datos de referencia de ingeniería para A3P250-FG144 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | A3P250-FGG144 |
|---|---|---|
| Package | 144-FPBGA, 13 × 13 mm | 144-LBGA |
| Brand | Microchip Technology | Microchip Technology |
| Device Family | ProASIC3 flash FPGA | ProASIC3 flash FPGA |
| Logic Elements | Approximately 3K | Approximately 3K |
| Block RAM | 36 Kb | 36 Kb |
| Lead Count | 144 leads | 144 leads |
| Configuration Memory | On-chip flash | On-chip flash |
Diferenciadores clave
- Compact 144-lead implementation with moderate on-chip resources (frente a A3P250-FGG144)
- Commercial-temperature ordering option (frente a A3P250-FGG144)
- On-chip flash supports field-reprogrammable configurations (frente a A3P250-FGG144)
Notas de diseño
Use the manufacturer FG144 land pattern and pin-description table rather than a generic 144-ball library. Confirm pad diameters, solder-mask openings, and assembly tolerances against the package drawing. The target is a 13 × 13 mm ball-grid package, so escape routing, fanout vias, and BGA inspection require deliberate PCB planning before schematic and footprint release.
Assign core, configuration, and I/O supply pins according to the ProASIC3 power architecture and connect every required ground pin. Review bank-voltage restrictions before connecting external interfaces. Place recommended bypass capacitors close to their associated device pins with short return paths, and verify the capacitor voltage rating against the highest supply rail used on the board.
Reserve clock and configuration pins according to the manufacturer layout guidance, and avoid long stubs or unnecessary test pads on sensitive routes. Match external interface timing to the device's specified operating conditions. Where two interfaces use conflicting voltage standards, place them in compatible I/O banks or use level translators rather than relying on an unsupported mixed-voltage configuration.
Do not substitute A3P250 options merely because their logic density is similar. The VQG100, PQG208, and FGG256 package variants have different lead counts and land patterns, so they are not drop-in replacements for A3P250-FG144. For any ordering-code change, verify the complete pinout, package drawing, temperature grade, supply assignments, configuration interface, and timing limits before production release.
Información de cumplimiento
Compliance attributes must be confirmed for the exact A3P250-FG144 ordering code in the manufacturer product and quality documentation.