Analog Devices

AD598AD - Monolithic LVDT Signal Conditioner | Analog Devices

N.º de pieza: AD598AD ✓ Activo
Integrated Vdss 20-lead ceramic DIP (CDIP) Package 20 kHz Speed
MOQ: 1 |

AD598AD Descripción general

Analog Devices AD598AD is a monolithic linear variable differential transformer (LVDT) signal-conditioning subsystem packaged in a 20-lead ceramic DIP. It combines an internal excitation oscillator, voltage reference, demodulation functions, and output amplification to convert LVDT displacement into a unipolar or bipolar DC voltage. The device is designed for accurate and repeatable position measurement, with DC output proportional to transducer position at excitation frequencies up to 20 kHz.

An LVDT signal conditioner is an interface circuit that converts the small, phase-dependent secondary voltage of an LVDT into a usable analog voltage. This conversion is required because LVDT output amplitude represents displacement while phase represents direction. The AD598AD integrates these otherwise discrete functions on one monolithic chip, reducing the amount of external circuitry and adjustment required in position-measurement systems.

The AD598AD includes an internal oscillator and voltage reference and requires no adjustment. Its signal-conditioning architecture is insensitive to LVDT null voltage and to primary-to-secondary phase shifts, two practical concerns in transformer-based displacement sensing. A typical output scale extends to approximately ±10.69 V, allowing the device to produce a bipolar analog signal for proportional positioning, while its unipolar configuration supports applications requiring a single-polarity output.

The monolithic architecture consolidates excitation, reference, demodulation, and amplification functions into one device. Internal synchronization provides a repeatable conversion from LVDT excitation to the output voltage, while compensation for null voltage and phase shifts reduces sensitivity to real-world transducer variations. The manufacturer datasheet also provides drift and power-supply-rejection figures for offset performance, allowing designers to evaluate system accuracy across changing supply and temperature conditions.

Typical uses include industrial valve-position feedback, laboratory displacement measurement, robotic actuator position sensing, test-equipment transducer interfaces, and closed-loop motion-control systems. These applications benefit from the integrated oscillator and reference because the LVDT, signal conditioner, and downstream analog or digital acquisition stage can operate from a coherent excitation-and-output relationship.

When designing around the AD598AD, match the transducer excitation frequency and phase relationship to the device operating limits, and route the analog output away from switching nodes and high-current traces. Input and output filtering should be selected from the datasheet guidance to preserve measurement bandwidth while rejecting unwanted noise.

This product page combines the manufacturer's functional description, package information, operating characteristics, and practical interface guidance with drop-in replacement research. It supports engineers comparing LVDT conditioning approaches, locating the AD598AD pinout and datasheet, and planning precision position-measurement designs before requesting a quotation.

Alternativas directas para AD598AD — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con AD598AD (mismo factor de forma y huella) — difiere en Mounting Type, Package, Product Type.

Analog Devices
Mounting Type: Surface mount
Package: 20-pin SOIC
Product Type: Monolithic LVDT signal conditioner IC
Comparar con AD598AD →

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

AD598AD Valores máximos y características eléctricas

Product Type Monolithic LVDT signal conditioner
Manufacturer Analog Devices
Encapsulado 20-lead ceramic DIP (CDIP)
Output Signal Unipolar or bipolar DC voltage
Maximum Transducer Frequency 20 kHz
Typical Full-Scale Output ±10.69 V
Internal Oscillator Integrated
Internal Voltage Reference Integrated
Adjustment Requirement No adjustment required
Sensitivity to Transducer Null Voltage Insensitive
Sensitivity to Primary-to-Secondary Phase Shifts Insensitive
Maximum Offset Drift 185 ppm/°C of full scale
Offset PSRR 741 ppm/V referred to the ±10.69 V output
Offset CMRR 741 ppm/V referred to the ±10.69 V output
Tipo de montaje Through-hole

Guía de configuración de pines de AD598AD 20-lead ceramic dip (cdip)

Configuración de pines para AD598AD (encapsulado 20-lead ceramic dip (cdip)). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 20-lead ceramic dip (cdip) para AD598AD

No hay datos detallados de patillaje disponibles para AD598AD.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AD598AD es adecuado para 6 aplicacións: Industrial Valve-Position Feedback, Robotic Actuator Position Sensing, Laboratory Displacement Instrumentation, Test and Measurement Systems, Precision Linear Motion Control, LVDT-Based Condition Monitoring.

🏭

Industrial Valve-Position Feedback

The AD598AD is appropriate for industrial valve-position feedback when an LVDT reports shaft travel through displacement. Its internal excitation oscillator and voltage reference eliminate the need to design a separate excitation subsystem, while the integrated conditioner converts transducer position into a proportional DC voltage. The architecture is insensitive to LVDT null voltage and primary-to-secondary phase shifts, which is valuable when maintaining repeatability across mechanically and electrically varied sensors. The AD598AD supports excitation frequencies up to 20 kHz and a typical full-scale output of ±10.69 V, allowing direct connection to an analog input or controller. Designers should verify supply limits, input common-mode range, output loading, and external passive-component values in the Analog Devices datasheet before finalizing the loop interface.

🤖

Robotic Actuator Position Sensing

The AD598AD can condition an LVDT installed on a robotic actuator or linear-motion stage when accurate travel position is required. Because the LVDT excitation and output conversion are handled by one monolithic device, the design reduces the number of separate analog functions needed around the transducer. Its compensation for null voltage and primary-to-secondary phase shifts supports repeatable position conversion under real-world sensor variations. Operation up to 20 kHz provides a defined upper limit for excitation-related positioning bandwidth, while the typical ±10.69 V output can feed motion-control electronics through suitable interface circuitry. The final design must verify actuator dynamics, cable capacitance, grounding, output loading, and the datasheet-specified external component network.

🔧

Laboratory Displacement Instrumentation

The AD598AD is useful in laboratory displacement instrumentation where an LVDT performs small, linear motion measurement and the result must become an analog voltage. Integrating the oscillator, voltage reference, demodulation path, and output amplification simplifies the instrument architecture and removes external adjustment steps. The device produces a DC output proportional to position and can support unipolar or bipolar measurement configurations. Its documented full-scale reference of ±10.69 V and frequency capability up to 20 kHz help establish the operating envelope for a test fixture. For accurate results, specify the LVDT's excitation frequency and sensitivity, minimize noisy cable routes, use stable external passive components, and include system-level offset and gain calibration.

📺

Test and Measurement Systems

The AD598AD can serve as the analog front end in test and measurement systems that use an LVDT as the sensing element. The internal oscillator provides excitation without a separate source, and the conditioner creates a proportional DC output suitable for acquisition, display, or closed-loop test control. Insensitivity to transducer null voltage and primary-to-secondary phase shifts helps reduce errors caused by common LVDT variations. The AD598AD's support for operation up to 20 kHz and a typical full-scale output of ±10.69 V define important starting points for instrumentation planning. Engineering teams should still evaluate supply noise, grounding, output impedance, sensor cable length, and bandwidth against the specific measurement range and fixture geometry.

⚡

Precision Linear Motion Control

The AD598AD is suited to linear-motion control loops in which an LVDT measures travel and the controller requires a proportional analog feedback signal. The integrated excitation, reference, and demodulation functions provide a compact interface between the mechanical sensor and control electronics. Because the design is insensitive to null voltage and primary-to-secondary phase shifts, it can support repeatable feedback from LVDTs mounted in different positions or manufactured to different tolerances. The documented excitation capability extends to 20 kHz, while the typical full-scale output reaches ±10.69 V. System designers should compare this bandwidth with the mechanical control loop, preserve signal integrity around the transducer cable, and verify regulator headroom and output compatibility at the controller input.

🖥️

LVDT-Based Condition Monitoring

The AD598AD can be used in condition-monitoring equipment that derives a DC position or travel indication from an LVDT. A standalone conditioner provides a direct path from mechanical movement to an analog signal, while its internal oscillator and reference reduce the complexity of maintaining a stable excitation relationship. The null-voltage and phase-shift insensitivity improves operation across practical sensor variations. The typical ±10.69 V output scale and 20 kHz frequency capability provide concrete boundaries when selecting the LVDT and downstream acquisition electronics. Before deployment, confirm the permitted power rails, sensor excitation requirements, input common-mode limits, offset-drift budget of 185 ppm/°C of full scale, and filtering needed to keep machinery-related interference outside the measurement bandwidth.

What is the AD598AD?
The AD598AD is a monolithic LVDT signal-conditioning IC that converts mechanical displacement represented by an LVDT into a proportional unipolar or bipolar DC voltage. According to the Analog Devices datasheet, it includes all required circuit functions on one chip and supports transducer excitation frequencies up to 20 kHz in a 20-lead ceramic DIP package.
What are the key specifications of AD598AD that engineers should know?
The AD598AD integrates an excitation oscillator, voltage reference, demodulator, and output amplifier, with no adjustment required. Its primary documented characteristics include operation to 20 kHz, a typical full-scale output of ±10.69 V, offset drift of 185 ppm/°C of full scale, and offset PSRR and CMRR of 741 ppm/V. It is packaged in a 20-lead ceramic DIP.
Where can I download the AD598AD datasheet PDF?
The official AD598AD datasheet PDF is available from Analog Devices at the manufacturer datasheet URL listed on this page. It contains the signal-conditioning description, performance characteristics, electrical specifications, package information, and application information needed to design an LVDT interface. Use the pin-description table in that document when assigning PCB connections.
Where can I find the AD598AD pinout?
The AD598AD pinout is documented in the Analog Devices AD598 manufacturer datasheet, while the product listing identifies the device as a 20-lead ceramic DIP. The exact package drawing and numbered terminal assignments should be taken from the datasheet pin configuration section rather than inferred from a generic DIP layout.
How does the AD598AD condition an LVDT signal?
The AD598AD excites the LVDT with its internal oscillator, derives position information from the secondary voltage, and produces a DC output proportional to displacement. The circuit is insensitive to transducer null voltage and primary-to-secondary phase shifts, which improves consistency when LVDT characteristics vary. A typical full-scale output can reach ±10.69 V.
Does the AD598AD require calibration adjustments?
No external adjustment is required for the AD598AD according to the Analog Devices datasheet. Its internal oscillator and voltage reference support a consistent excitation and conversion process, while the signal-conditioning design compensates for null voltage and primary-to-secondary phase shifts. The application still requires correct sensor connection, suitable external passive components, and system-level calibration where absolute position accuracy is needed.
What can replace the AD598AD with a drop-in part?
No confirmed pin-compatible replacement for the AD598AD is identified in the available cross-reference information. A substitute must match the 20-lead ceramic DIP footprint, preserve pin assignments, and provide compatible excitation, demodulation, output range, bandwidth, power, and accuracy. Do not treat a generic LVDT conditioner with a different package or pinout as a drop-in replacement.
Is the AD598AD suitable for industrial valve-position measurement?
The AD598AD is suitable for valve-position measurement when the LVDT operates within the device's supported excitation frequency and output range. Its integrated excitation and reference reduce external circuitry, while compensation for null voltage and phase shifts supports repeatable positioning. The measured output can then drive an analog input, indicator, or closed-loop control system.
When should I choose the AD598AD over a discrete LVDT interface?
Choose the AD598AD when a compact, repeatable LVDT interface is more important than implementing excitation, demodulation, and signal conditioning with separate components. The integrated oscillator and reference remove several external circuit functions, and the monolithic device requires no adjustment. A discrete approach may still be appropriate when customization, special isolation, or unusual signal processing dominates the design.
AD598AD versus AD598JRZ: what should be compared before substitution?
The AD598AD and AD598JRZ are related AD598 designations, but substitution requires verification of package construction, pinout, temperature grade, electrical limits, and lifecycle status against the official ordering information. The available comparison material does not establish a qualified drop-in relationship for this 20-lead ceramic DIP assembly, so both package and functional compatibility must be confirmed before redesign approval.
What is the best Analog Devices equivalent for the AD598AD?
The closest confirmed Analog Devices equivalent is the AD598 itself when ordered under the correct package and temperature suffix. No separate modern Analog Devices MPN is documented here as a pin-to-pin, parameter-matched replacement in the same 20-lead ceramic DIP. Confirm the exact suffix, electrical grade, availability, and lifecycle status with the manufacturer before substituting it.
Where can I buy AD598AD online?
Use the Request a Quote form on this page to ask for AD598AD availability, current lead time, and order handling. The part is a 20-lead ceramic DIP LVDT signal conditioner from Analog Devices, and its package suffix matters when requesting a quotation. The current lead time and physical stock should be confirmed through the form before committing a production schedule.
What is the price of AD598AD?
The current AD598AD quotation is available through the Request a Quote form on this page. No fixed price tier is published in the product record, and the part is ordered under the exact 20-lead ceramic DIP suffix AD598AD. Submit the required quantity and delivery location with the request to obtain current commercial terms.
How long is the lead time for AD598AD?
The current lead time for AD598AD should be requested through the Request a Quote form on this page. Lead time can depend on order quantity, package suffix, manufacturing availability, and delivery location. Request a written quotation and supply forecast before treating the component as available for a specific production date.
Is AD598AD in stock?
AD598AD inventory status should be confirmed through the Request a Quote form on this page. The manufacturer lists the AD598 family as an active product, but exact stock for the AD598AD package suffix and the requested quantity is established during quotation. Include your required quantity, date code preference, and ship-to region for an actionable response.
What design constraints matter when using the AD598AD?
The main constraints are the supported LVDT excitation range, power requirements, output swing, bandwidth, and accuracy limits defined in the Analog Devices datasheet. The device supports excitation frequencies up to 20 kHz, and its typical full-scale output is ±10.69 V. Keep sensitive analog traces away from switching currents and follow the manufacturer guidance for external passive components.

Datos de referencia de ingeniería para AD598AD — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the AD598AD when you need a compact, factory-adjustment-free LVDT interface that converts mechanical position into a proportional DC voltage. Its internal excitation oscillator and voltage reference simplify the analog front end, while compensation for null voltage and primary-to-secondary phase shifts supports repeatable transducer operation. The typical ±10.69 V output and operation to 20 kHz make it particularly useful for industrial position feedback, motion control, laboratory displacement measurement, and test equipment.

A discrete LVDT conditioning design may be preferable when the excitation topology, isolation, gain architecture, or signal processing must be heavily customized. Do not choose another LVDT conditioner solely by function: the replacement must match the 20-lead ceramic DIP footprint, pin assignments, supply requirements, output range, frequency capability, and accuracy class. No separate drop-in replacement has been qualified for AD598AD. Before production release, verify the exact package suffix, operating-temperature grade, supply limits, external passive network, sensor cable behavior, and current lifecycle status against the manufacturer documentation.

Comparación con alternativas

Parámetro Este producto
Brand Analog Devices
Package 20-lead ceramic DIP (CDIP)
Signal Conditioner Type Monolithic LVDT signal conditioner
Output Type Unipolar or bipolar DC voltage
Maximum Transducer Frequency 20 kHz
Typical Full-Scale Output ±10.69 V
Internal Oscillator Integrated
Internal Voltage Reference Integrated
Adjustment Requirement No adjustment required
Offset Drift 185 ppm/°C of full scale
Offset PSRR 741 ppm/V referred to the ±10.69 V output
Offset CMRR 741 ppm/V referred to the ±10.69 V output

Diferenciadores clave

  • Complete monolithic LVDT interface (frente a Discrete LVDT interface implementation)
  • No external adjustment required (frente a Discrete LVDT interface implementation)
  • Compensation for common LVDT variations (frente a Basic phase-sensitive LVDT interface)
  • Defined analog output and frequency capability (frente a Low-frequency laboratory LVDT conditioner)

Notas de diseño

Keep the AD598AD, external passive network, LVDT input connections, and analog output path compact and physically separated from switching-power nodes. Route high-current inputs away from the conditioner rather than relying only on filtering after the traces have already coupled noise into the circuit. A continuous ground reference between the signal conditioner and downstream analog input also helps preserve a low-noise measurement path.

Select the LVDT and external passive values according to the Analog Devices datasheet so the operating excitation frequency remains within the documented 20 kHz limit. Shielded sensor cables and controlled grounding are important when long cables can introduce capacitive coupling or phase distortion. Confirm the filter cutoff against the required mechanical bandwidth; excessive filtering can slow the position response even though it reduces visible noise.

Do not treat the integrated oscillator and voltage reference as permission to ignore supply-decoupling or output-loading requirements. Verify the permitted supply range, power dissipation, input common-mode range, and output load in the manufacturer datasheet before assigning components. The listed 185 ppm/°C offset drift and 741 ppm/V rejection figures are specific to the test conditions and should not be generalized beyond those conditions.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The available manufacturer and distributor information does not state the required environmental, substance, or automotive qualification details.

Datos verificados el: 2026-11-03 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

AD598AD datasheet AD598AD pinout AD598AD datasheet pdf AD598AD specifications AD598AD 20 lead CDIP AD598AD LVDT signal conditioner AD598AD replacement AD598AD equivalent AD598AD cross reference AD598AD vs AD598JRZ AD598AD application circuit Analog Devices AD598AD AD598AD price AD598AD stock where to buy AD598AD

Componentes & términos relacionados

Analog Devices AD598AD AD598 AD598JRZ LVDT linear variable differential transformer LVDT signal conditioner sensor interface signal conditioning DC voltage output unipolar output bipolar output internal oscillator internal voltage reference primary excitation secondary voltage null voltage phase shift 20 kHz excitation ±10.69 V output offset drift PSRR CMRR 20-lead ceramic DIP position measurement
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ