Analog Devices

ADSP-21060CZ-160 - 40MHz 32-Bit SHARC DSP | Analog Devices

N.º de pieza: ADSP-21060CZ-160 ✗ Fin de vida
5 V Vdss 240-pin CQFP (32 x 32 mm) Package 40 MHz Speed ROMless Memory
MOQ: 1 |

ADSP-21060CZ-160 Descripción general

The Analog Devices ADSP-21060CZ-160 is a 32-bit floating-point SHARC digital signal processor with a 40 MHz processor clock, 40 MIPS throughput, and a 5 V supply in a 240-pin CQFP package measuring 32 x 32 mm. The industrial-temperature device combines dedicated signal-processing arithmetic with a high-speed parallel architecture designed for demanding audio, communications, control, and instrumentation workloads. Its gull-wing package and top-side heat slug support conventional surface-mount assembly while providing a substantial thermal interface for sustained processing performance.

A digital signal processor is a specialized microprocessor whose internal architecture is optimized for real-time mathematical operations. Unlike a general-purpose processor, a DSP uses deterministic execution, parallel data paths, and dedicated multiply-accumulate resources to process continuous streams of samples. In the broader hierarchy, the ADSP-21060 belongs to the SHARC family of digital signal processors, semiconductor integrated circuits, and real-time embedded processing platforms.

Principal features include 32-bit floating-point arithmetic, ROMless program memory, a 40 MHz clock, and a 40 MIPS execution rating. The floating-point format supports a broad numerical range without requiring the fixed-point scaling normally associated with conventional digital controllers. Parallel architecture allows multiple signal-processing operations to progress efficiently within each processor cycle, which is valuable in filter banks, modulation, transform, and waveform-processing systems.

The ADSP-21060 belongs to the ADSP-2106x SHARC processor family, whose processors are described by Analog Devices as 32-bit signal-processing microcomputers optimized for high-performance DSP applications. Its architecture is suited to blocks of arithmetic operations that occur repeatedly and predictably. Peripheral connectivity, memory organization, and external interface requirements should be checked against the manufacturer’s pin-description table when designing the processor bus, boot interface, and signal-chain converters.

Typical uses include professional audio decoding and mixing, industrial motor control, vibration analysis, communications modulation, radar and sonar signal processing, and high-speed measurement systems. In each case, the processor’s arithmetic throughput allows filtering, sampling-rate conversion, mixing, and control functions to execute concurrently when the application software is partitioned appropriately.

A critical implementation consideration is the processor’s thermal environment. The top-side heat slug requires a board footprint and assembly process designed to transfer heat into the PCB or another thermal structure. Decoupling, clock, data buses, and analog interfaces must also be routed according to the manufacturer’s reference design and pin guidance rather than treated as a generic 5 V digital component.

This page combines the manufacturer product-page specifications, package characteristics, lifecycle information, and comparison context with practical guidance for evaluating the ADSP-21060CZ-160 in a new DSP design. It also distinguishes genuine same-footprint alternatives from broader SHARC options so engineers can assess replacement risk before committing a board layout.

Alternativas directas para ADSP-21060CZ-160 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

ADSP-21060CZ-133

✅ Sustitución directa
📦 240-pin CQFP (32 x 32 mm)
Lower performance suffix than the 40 MHz, 40 MIPS ADSP-21060CZ-160; same CZ package family requires timing verification

📋 Alternativa de referencia (no en el catálogo)

ADSP-21060CZ-100

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 240-pin CQFP (32 x 32 mm)
Uses the lower -100 clock-performance suffix rather than the -160 grade, reducing timing margin versus the 40 MHz, 40 MIPS target

📋 Alternativa de referencia (no en el catálogo)

ADSP-21060CZ-80

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 240-pin CQFP (32 x 32 mm)
Uses the lower -80 performance suffix, trading processor timing margin for a more conservative same-family configuration

📋 Alternativa de referencia (no en el catálogo)

ADSP-21060CZ-66

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 240-pin CQFP (32 x 32 mm)
Uses the lower -66 performance suffix and therefore has less throughput margin than the 40 MHz, 40 MIPS target

📋 Alternativa de referencia (no en el catálogo)

ADSP-21060CZ-50

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 240-pin CQFP (32 x 32 mm)
Uses the lower -50 performance suffix, preserving the CZ mechanical family while reducing available real-time processing margin

📋 Alternativa de referencia (no en el catálogo)

ADSP-21060CZ-160 Especificaciones

Processor Type 32-bit floating-point SHARC digital signal processor
Frecuencia de reloj máxima 40 MHz
Instruction Throughput 40 MIPS
Architecture 32-bit SHARC signal-processing microcomputer
Arithmetic Format Floating point
Processor Bit Width 32 bit
Program Memory ROMless
Typical Operating Supply Voltage 5 V
Rango de temperatura de funcionamiento -40 °C to +100 °C
Temperature Grade Industrial
Package Type 240-pin CQFP (32 x 32 mm)
Package Code HFQFP
Terminal Form Gull wing
Number of Terminals 240
Heat-Slug Orientation Top
Tipo de montaje Surface mount

Guía de configuración de pines de ADSP-21060CZ-160 hfqfp

Configuración de pines para ADSP-21060CZ-160 (encapsulado hfqfp). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado hfqfp para ADSP-21060CZ-160

No hay datos detallados de patillaje disponibles para ADSP-21060CZ-160.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

ADSP-21060CZ-160 es adecuado para 6 aplicacións: Professional Audio Processing, Industrial Motor Control, Communications Modulation, Vibration and Condition Monitoring, Radar and Sonar Processing, Test and Measurement Instrumentation.

🎧

Professional Audio Processing

The ADSP-21060CZ-160 is suitable for multichannel professional audio equipment that performs filtering, mixing, equalization, and sample-rate conversion in real time. Its 32-bit floating-point arithmetic provides sufficient numerical range for audio paths, while the stated 40 MIPS throughput allows multiple processing blocks to run concurrently under a deterministic interrupt schedule. The 5 V processor can sit beside external converters and interface logic, and the 240-pin CQFP provides extensive external signal connectivity. Because the heat slug is mounted on top, the PCB and enclosure must support thermal transfer without obstructing assembly or inspection.

🏭

Industrial Motor Control

The ADSP-21060CZ-160 can implement digital motor-control algorithms where current, position, speed, and vibration signals must be processed at predictable intervals. Floating-point arithmetic supports observers, adaptive filters, and transformations without the overflow-management complexity of scaled fixed-point arithmetic. Its 40 MIPS throughput provides compute capacity for control calculations alongside acquisition and supervisory functions. The -40 °C to +100 °C industrial temperature range suits factory equipment, while the top-side heat slug requires an explicit thermal path through the board and enclosure. Firmware timing should be measured at the intended clock and I/O rates.

🌐

Communications Modulation

The ADSP-21060CZ-160 is applicable to communications equipment performing real-time filtering, modulation, demodulation, or spectral processing. Its 32-bit SHARC architecture is optimized for repeated arithmetic operations, and the 40 MIPS rating provides substantial throughput for a block-processing data path. External converters and memory can be connected through the processor’s peripheral and bus resources, subject to the manufacturer’s electrical and timing requirements. The 240-pin CQFP supports a high pin count compared with smaller DSP packages. Signal-integrity-sensitive routing should follow the reference design, particularly for clock, high-speed buses, and analog input interfaces.

🏭

Vibration and Condition Monitoring

The ADSP-21060CZ-160 fits rotating-machine monitoring systems that require continuous analysis of vibration, acoustic, or electrical waveforms. Real-time filters and transforms can identify spectral components while control routines track machine state. Floating-point arithmetic improves flexibility when signal amplitudes vary widely, and the 40 MIPS throughput permits multiple sensor channels to be processed under a unified schedule. The industrial temperature range supports use in machinery cabinets and test equipment. Designers should budget processor losses across the full operating temperature and provide the top-side heat slug with a reliable thermal path to avoid performance degradation near thermal limits.

✈️

Radar and Sonar Processing

The ADSP-21060CZ-160 can serve as the real-time processing engine in radar, sonar, or acoustic-analysis systems that perform filtering, beamforming, detection, or spectral analysis. Its 32-bit floating-point architecture accommodates algorithms with wide dynamic range, and the 40 MIPS throughput supports deterministic processing of sampled data. The processor operates from a typical 5 V rail and is available in an industrial-grade package. A system implementation must carefully separate analog and digital sections, control grounding and return paths, and place decoupling and clock circuitry according to the manufacturer’s application guidance. Thermal monitoring is essential during long acquisition cycles.

🖥️

Test and Measurement Instrumentation

The ADSP-21060CZ-160 is appropriate for oscilloscope-like, spectrum-analysis, and precision measurement products that continuously acquire samples and execute digital correction or transformation. The 32-bit floating-point format supports calibration algorithms and signal chains with broad dynamic range, while 40 MIPS throughput supports real-time operation rather than offline simulation. The -40 °C to +100 °C industrial range supports laboratory and embedded test equipment. Its large CQFP footprint provides ample I/O, but the top-side heat slug demands careful PCB construction and assembly heating. The analog front end should be isolated from high-speed digital activity to preserve measurement accuracy.

Resumen de productos recomendados

ADSP-21060 Analog Devices Se usa en: Professional Audio Processing, Industrial Motor Control, Communications Modulation, Vibration and Condition Monitoring, Radar and Sonar Processing, Test and Measurement Instrumentation ADSP-21062 Related ADSP-2106x signal-processing platform Se usa en: Professional Audio Processing, Industrial Motor Control, Communications Modulation, Vibration and Condition Monitoring, Radar and Sonar Processing, Test and Measurement Instrumentation
What are the key specifications of ADSP-21060CZ-160 that engineers should know?
The ADSP-21060CZ-160 is a 32-bit floating-point SHARC digital signal processor operating from a typical 5 V supply at up to 40 MHz. Analog Devices identifies the device as a 40 MIPS signal-processing microcomputer in a 240-pin CQFP package measuring 32 x 32 mm. Its industrial temperature range is -40 °C to +100 °C, and the package uses gull-wing terminals with a top-side heat slug. These characteristics place it in the ADSP-2106x family of high-performance DSP processors.
What is the ADSP-21060CZ-160 used for?
The ADSP-21060CZ-160 is used for real-time floating-point signal processing in audio, communications, control, instrumentation, and industrial systems. Its 32-bit SHARC architecture and 40 MIPS throughput support recurring operations such as filtering, mixing, modulation, and transforms. The processor is especially useful when a stream of sampled data must be processed with deterministic timing and substantial arithmetic throughput. According to the Analog Devices product page, the ADSP-2106x family is optimized for high-performance DSP applications.
Is ADSP-21060CZ-160 the same as ADSP-21060CW-160?
No. The ADSP-21060CZ-160 and ADSP-21060CW-160 are not a safe drop-in match for PCB replacement. The CZ designation identifies the 240-pin CQFP gull-wing package with a top-side heat slug, while the CW variant is a different package configuration. Although both are related 40 MHz, 5 V SHARC devices, the physical lead arrangement and thermal implementation differ. Use the manufacturer pinout and package drawings before considering any change between these MPNs.
What is the best drop-in replacement for ADSP-21060CZ-160?
The ADSP-21060CZ-133 is the closest identified same-package replacement for the ADSP-21060CZ-160. It retains the ADSP-21060 CZ package configuration while using a different performance-grade suffix, which requires checking clock, timing, and software constraints before substitution. The CZ-160’s 40 MHz core and 40 MIPS rating should not be assumed for the CZ-133. Confirm the complete manufacturer ordering guide and errata before releasing a replacement design.
Can ADSP-21060CZ-133 replace ADSP-21060CZ-160 in an existing design?
The ADSP-21060CZ-133 can be considered a same-package candidate, but it should not be treated as an automatic functional substitute. The principal engineering concern is the lower clock-performance grade encoded by the suffix. Firmware timing, real-time deadlines, external bus timing, and any PLL-dependent calculations must be reevaluated against the manufacturer’s specifications for the CZ-133. Preserve the CZ land pattern and heat-slug arrangement, but complete the timing review before substitution.
When should I choose ADSP-21060CZ-160 over a lower-speed SHARC variant?
Choose the ADSP-21060CZ-160 when a legacy design specifically requires its 40 MHz, 40 MIPS operating point and the existing software has been qualified against that performance grade. A lower-speed CZ variant may fit the physical footprint but can shorten the available processing time between sample interrupts. Choose it only after measuring the margin between real-time deadlines and the worst-case execution time of the application. For new designs, verify current processor availability and tooling support before committing.
Is ADSP-21060CZ-160 suitable for industrial signal-processing equipment?
The ADSP-21060CZ-160 is identified as an industrial-temperature device with an operating range of -40 °C to +100 °C. That grade is appropriate for many factory automation, test, vibration-analysis, and embedded control systems where commercial-temperature limits are insufficient. The 5 V processor and 40 MIPS throughput support deterministic real-time processing, while the top-side heat slug provides an intended thermal path. Final product qualification should also account for the processor’s actual junction temperature and enclosure temperature rise.
Where can I download the ADSP-21060CZ-160 datasheet PDF?
The official ADSP-21060 documentation is available through the Analog Devices product page at https://www.analog.com/en/products/adsp-21060.html. From that page, open the product documentation or datasheet resources for the ADSP-2106x family. Use the ordering guide to associate the ADSP-21060CZ-160 suffix with the correct package, speed grade, temperature range, and exposed thermal structure. The pin-description table and package outline should be used together during PCB layout.
Where can I find the ADSP-21060CZ-160 pinout and package drawing?
The ADSP-21060CZ-160 uses a 240-pin CQFP package with gull-wing leads and a top-side heat slug. The official Analog Devices product page provides the family datasheet, pin-description information, package drawings, and ordering documentation needed to assign signals and construct the PCB footprint. Because this package has 240 terminals, do not substitute a generic 240-pin symbol without checking lead pitch, exposed thermal features, pin orientation, and the manufacturer drawing.
What is the operating voltage of ADSP-21060CZ-160?
The ADSP-21060CZ-160 operates from a typical 5 V supply. Distributor product information for this exact MPN identifies the processor as an industrial 5 V SHARC DSP with a 40 MHz clock. The complete design must follow the manufacturer’s recommended operating ranges, decoupling network, power-up sequence, and signal-level limits for all I/O pins rather than treating the 5 V figure as a universal limit for every external interface.
How much thermal design is required for the ADSP-21060CZ-160?
The ADSP-21060CZ-160 requires deliberate thermal design because it is a high-performance processor in a 240-pin CQFP package with a top-side heat slug. The heat slug must mate with the designed PCB thermal area or another approved heat-transfer structure. Calculate worst-case processor dissipation from supply voltage, current, clock activity, and ambient conditions, then verify junction temperature using the manufacturer’s thermal characterization information. Assembly reflow and heat-slug attachment also require process-specific controls.
Where can I buy ADSP-21060CZ-160 online?
Use the “Request a Quote” form on this page to ask about ADSP-21060CZ-160 availability, condition, and lead time. Because this processor is a legacy DSP, supply may depend on remaining factory inventory rather than regular current-production allocation. Include the required quantity, date code preference, target package suffix, and any inspection or traceability requirements in the request. The product page is the appropriate channel for a precise quotation.
What is the price of ADSP-21060CZ-160?
Current commercial terms for the ADSP-21060CZ-160 are obtained through the “Request a Quote” form on this page. The processor is an obsolete legacy DSP, so price can vary with remaining factory inventory, date code, quantity, and traceability requirements. The structured quote process avoids presenting a stale catalog figure as current availability. State your annual usage, forecast, and inspection requirements when requesting the quotation.
What is the lead time for ADSP-21060CZ-160?
Lead time for the ADSP-21060CZ-160 depends on remaining factory inventory and the requested quantity. Submit the quantity and required date-code conditions through the “Request a Quote” form on this page for a current scheduling response. Because the product is obsolete, avoid assuming that a distributor listing guarantees production allocation. Buyers should include any date-code or traceability requirement in the request because it can materially affect availability and delivery.
Is ADSP-21060CZ-160 in stock?
Stock status for the ADSP-21060CZ-160 must be confirmed for the exact suffix because legacy DSP inventory can be limited and discontinuous. Use the “Request a Quote” form on this page to request current availability, quantity breaks, and expected lead time. Include your required date code and production schedule when requesting confirmation. Do not treat an obsolete-part listing as a guarantee that additional units can be manufactured to the same schedule.
What is the best Analog Devices equivalent for ADSP-21060CZ-160?
The best identified Analog Devices equivalent is the ADSP-21060CZ-133 because it preserves the CZ package family while changing the performance suffix. Other ADSP-21060 order codes may use different lead frames or thermal structures and therefore may not fit the existing PCB. A software-compatible SHARC processor can still require changes to clocking, memory interfaces, peripherals, and timing. Use the manufacturer’s ordering guide and datasheet to confirm mechanical and electrical compatibility before selecting any replacement.

Datos de referencia de ingeniería para ADSP-21060CZ-160 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the ADSP-21060CZ-160 when maintaining an existing 40 MHz, 40 MIPS industrial SHARC design matters more than current product availability. It is particularly appropriate for legacy audio, communications, control, and measurement systems whose PCB already implements the 240-pin CQFP gull-wing footprint with a top-side heat slug. The ADSP-21060CZ-133 is the first same-package candidate to evaluate when original inventory is unavailable, but its lower performance suffix requires a complete timing and firmware review. The CZ-100, CZ-80, CZ-66, and CZ-50 variants preserve the CZ mechanical family while progressively reducing processing margin, so they are suitable only when the application has measured timing headroom. Do not select a CW or KS package variant as a drop-in replacement without a PCB redesign. For any substitution, confirm the manufacturer ordering code, package drawing, pin table, clock limits, thermal data, and lifecycle status before releasing production hardware.

Comparación con alternativas

Parámetro Este producto ADSP-21060CZ-133 ADSP-21060CZ-100 ADSP-21060CZ-80 ADSP-21060CZ-66 ADSP-21060CZ-50
Package 240-pin CQFP (32 x 32 mm) 240-pin CQFP (32 x 32 mm) 240-pin CQFP (32 x 32 mm) 240-pin CQFP (32 x 32 mm) 240-pin CQFP (32 x 32 mm) 240-pin CQFP (32 x 32 mm)
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Performance Suffix -160 -133 -100 -80 -66 -50
Processor Architecture 32-bit SHARC 32-bit SHARC 32-bit SHARC 32-bit SHARC 32-bit SHARC 32-bit SHARC
Arithmetic Format Floating point Floating point Floating point Floating point Floating point Floating point
Typical Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Temperature Grade Industrial Industrial Industrial Industrial Industrial Industrial
Pin Count 240 240 240 240 240 240
Program Memory ROMless ROMless ROMless ROMless ROMless ROMless

Diferenciadores clave

  • Higher same-package performance grade (frente a ADSP-21060CZ-133)
  • Established 240-pin CQFP mechanical format (frente a ADSP-21060CW-160)
  • Industrial temperature qualification (frente a ADSP-21060CZ-100)
  • ROMless architecture for externally managed program storage (frente a ADSP-21060CZ-50)

Notas de diseño

Treat the top-side heat slug as a mandatory thermal feature rather than an optional exposed pad. Provide the manufacturer-specified PCB thermal land, verify the assembly process used to attach the slug, and connect the thermal structure to copper with minimal spreading distance. Estimated thermal design should begin with the processor’s measured supply current multiplied by 5 V, then include the processor’s auxiliary input currents and the duty cycle of the operating mode. Validate the resulting junction temperature with the manufacturer’s thermal model under worst-case ambient and airflow conditions.

Construct the board from the official ADSP-21060CZ package outline and pin description rather than a generic 240-pin symbol. Confirm lead pitch, body dimensions, pin-1 orientation, thermal-slug geometry, and courtyard clearance before releasing Gerber files. Place power-decoupling capacitors at the relevant supply pins with short ground paths, and route clocks and high-speed buses away from analog inputs. The large pin count provides many signal options, but correct pin assignment and bus topology remain essential for reliable operation.

Do not assume that every ADSP-21060 order code is mechanically interchangeable. The CZ order code uses the 240-pin CQFP gull-wing package with a top-side heat slug, while other family order codes may use different packages or thermal arrangements. For the CZ performance-grade alternatives, verify processor timing, firmware deadlines, bus timing, and memory assumptions against the exact replacement datasheet. A shared body size alone does not establish pin compatibility or equivalent performance.

Implement the 5 V supply network so that the processor’s transient demand does not create unacceptable ripple at its pins. Follow the manufacturer’s recommended capacitor values, placement, and power-up behavior, and separate noisy switching-converter stages from sensitive analog and reference circuits. Since this is a ROMless DSP, boot-memory behavior and supply sequencing must also be checked. Validate startup, reset release, and repeated power cycling rather than testing only steady-state regulation.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The ADSP-21060CZ-160 is identified as an industrial-temperature DSP. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed for the exact order code and therefore remain unknown.

Búsquedas relacionadas

ADSP-21060CZ-160 datasheet ADSP-21060CZ-160 pinout ADSP-21060CZ-160 datasheet pdf ADSP-21060CZ-160 specifications ADSP-21060CZ-160 package ADSP-21060CZ-160 equivalent ADSP-21060CZ-160 replacement ADSP-21060CZ-160 cross reference ADSP-21060CZ-160 vs ADSP-21060CZ-133 ADSP-21060CZ-160 footprint ADSP-21060CZ-160 price ADSP-21060CZ-160 stock Analog Devices ADSP-21060CZ-160 ADSP-21060 40MHz SHARC DSP ADSP-21060CZ-160 industrial DSP

Componentes & términos relacionados

Analog Devices ADSP-21060CZ-160 ADSP-21060 ADSP-21062 ADSP-21060CZ-133 ADSP-21060CZ-100 ADSP-21060CZ-80 ADSP-21060CZ-66 ADSP-21060CZ-50 SHARC digital signal processor DSP signal-processing microcomputer floating-point arithmetic 32-bit processor 40 MHz clock 40 MIPS throughput ROMless program memory 240-pin CQFP HFQFP package gull-wing lead top-side heat slug surface-mount package industrial temperature grade real-time signal processing
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ