ADV7392BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
N.º de pieza: ADV7392BCPZ ✗ Fin de vidaADV7392BCPZ Descripción general
A video encoder is a signal-conversion integrated circuit that accepts digital pixel data and produces analog video suitable for display equipment or downstream transmission. In the broader product hierarchy, the ADV7392 belongs to video interface ICs, interface ICs, and integrated circuits. Its three internal DACs reduce the number of external video output stages required when a system must generate multiple analog video channels.
The principal features of the ADV7392 include 10-bit video conversion, three integrated video DACs, operation from 2.7 V or 3.3 V, support for composite CVBS and S-Video, and a compact chip-scale package. These characteristics make the encoder useful where multiple analog video outputs must be generated without relying entirely on discrete DAC implementations. The low-power design is also relevant to portable and space-constrained media equipment.
The ADV7390, ADV7391, ADV7392, and ADV7393 form a related family of monolithic high-speed digital-to-analog video encoders. The ADV7392 variant includes three 2.7 V or 3.3 V, 10-bit video DACs. Its pipeline timing is relevant to system integration because a falling HSYNC edge into the encoder produces a corresponding falling edge on the tri-level synchronization output after the pipeline delay defined in the manufacturer data sheet.
Typical applications include DVD players, game consoles, media players, SD-video equipment, HD-video equipment, and multi-output analog video systems. In each case, the device serves as the final digital-to-analog conversion stage, with downstream circuitry handling output coupling, termination, filtering, or connector routing.
Designers should treat the 6 mm by 6 mm LFCSP footprint as a compact but routed-layout challenge. PCB traces, bypass capacitors, analog video outputs, digital inputs, control signals, and power connections must be assigned according to the manufacturer pin-description table. Output filtering and impedance requirements should be derived from the data sheet rather than copied from a generic composite-video circuit.
This page combines the manufacturer product information, family-level architectural context, package details, application guidance, and a strict drop-in comparison framework. It also identifies where device-specific electrical limits and pin assignments must be confirmed in the official ADV7390/ADV7391/ADV7392/ADV7393 data sheet before release to production.
Alternativas directas para ADV7392BCPZ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ADV7392BCPZ (mismo factor de forma y huella) — difiere en Package, Output Formats, Product Type, Number of DACs, Resolution.
ADV7390BCPZ
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →ADV7391BCPZ
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →ADV7393BCPZ-REEL
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →ADV7392BCPZ Especificaciones
| Product Type | 10-bit SD/HD video encoder IC |
| Video Resolution Support | Standard Definition and High Definition |
| Video DAC Resolution | 10 bit |
| Number of Video DACs | 3 |
| DAC Supply Voltage Options | 2.7 V or 3.3 V |
| Supported Video Output | Composite CVBS and S-Video |
| Architecture | Monolithic high-speed digital-to-analog video encoder |
| Encapsulado | 40-LFCSP-WQ (6 mm x 6 mm) |
| Tipo de montaje | Surface mount |
| Lifecycle Recommendation | Not recommended for new designs |
| Synchronization Output | Tri-level sync |
| Input Timing Reference | HSYNC |
| Estado RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Guía de configuración de pines de ADV7392BCPZ 40-lfcsp-wq (6 mm x 6 mm)
Configuración de pines para ADV7392BCPZ (encapsulado 40-lfcsp-wq (6 mm x 6 mm)). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para ADV7392BCPZ.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ADV7392BCPZ es adecuado para 6 aplicacións: DVD Player Video Output, Game Console Composite Video, Media Player Analog Output, Multi-Output AV System, SD Video Encoding, HD Video Encoding.
DVD Player Video Output
The ADV7392BCPZ fits a DVD-player output stage that requires several analog video channels from digital video data. Its three integrated 10-bit DACs, operated at 2.7 V or 3.3 V, reduce the number of separate video converter stages needed for composite CVBS and S-Video generation. The encoder can sit after the final video-processing block, with its outputs routed through the filtering and termination network specified by the manufacturer. The compact 6 mm by 6 mm LFCSP package also preserves board area in a consumer chassis. Verify pixel-clock, synchronization, and output-level requirements against the official ADV7390/ADV7391/ADV7392/ADV7393 data sheet before production release.
Recomendado
Game Console Composite Video
The ADV7392BCPZ is applicable to a game-console video path that must convert digital frames into composite CVBS and S-Video for a display connection. Its 10-bit DAC resolution provides the conversion core, while three integrated DACs support multiple analog outputs from one compact encoder. The 2.7 V or 3.3 V operating options can simplify rail planning when the surrounding digital and analog sections already use compatible levels. Place bypass capacitance close to the power pins and keep the three video outputs separated from high-current digital return paths. Exact synchronization timing, maximum clock rate, and output amplitude must be selected from the manufacturer data sheet.
Recomendado
Media Player Analog Output
The ADV7392BCPZ supports a media-player design that must expose legacy analog video from a modern digital signal chain. Three integrated 10-bit DACs allow composite and S-Video outputs to be generated without a bank of discrete converter packages, while the low-power chip-scale construction is useful in compact portable media equipment. Use the encoder after pixel-format conversion and timing generation, then follow the manufacturer reference network for output coupling and impedance. Because the ADV7392 is marked not recommended for new designs, a new media-player platform should also evaluate the active same-family encoder selected for the required output combination before freezing the PCB.
Recomendado
Multi-Output AV System
The ADV7392BCPZ is suited to a multi-output audiovisual system in which one digital video source must feed more than one analog destination. Its three 10-bit video DACs provide the conversion resources for a combination of composite CVBS and S-Video outputs, reducing system footprint compared with three separate converter implementations. The encoder should operate in the analog-video section of the board, with controlled return paths and short output routes feeding the required coupling or filtering stages. Designers must confirm the available channel count, output enable behavior, and synchronization timing for the selected configuration. The 6 mm by 6 mm LFCSP package requires careful escape routing but supports dense multichannel AV hardware.
Recomendado
SD Video Encoding
The ADV7392BCPZ can serve as the final digital-to-analog stage of an SD-video system using composite CVBS or S-Video. Its 10-bit DACs convert the processed digital video stream into analog signals suitable for the downstream video connector and output network. The compact low-power encoder is particularly useful in equipment with limited PCB area and modest thermal budget. Place the device close to the video connector when routing permits, maintain a continuous ground reference under the package, and isolate analog output paths from switching regulators and fast digital clocks. The permitted pixel rate and exact output limits should be taken directly from the manufacturer timing and electrical tables.
Recomendado
HD Video Encoding
The ADV7392BCPZ is applicable to HD-video systems requiring a compact encoder with multiple analog DAC outputs. The device combines an HD-capable digital video input stage with three 10-bit DACs, allowing a design to generate several composite or S-Video outputs from processed digital video. Signal integrity becomes important at higher pixel rates, so component placement should follow the manufacturer layout guidance and provide short, controlled paths for timing and synchronization signals. Separate analog return currents from digital switching activity where the board architecture permits. Maximum resolution and pixel-clock limits must be confirmed from the official family data sheet rather than inferred from the HD designation alone.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADV7392BCPZ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADV7390BCPZ | ADV7391BCPZ | ADV7393BCPZ |
|---|---|---|---|---|
| Package | 40-LFCSP-WQ (6 mm x 6 mm) | 40-LFCSP-WQ (6 mm x 6 mm) | 40-LFCSP-WQ (6 mm x 6 mm) | 40-LFCSP-WQ (6 mm x 6 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Family | ADV7390/ADV7391/ADV7392/ADV7393 | ADV7390/ADV7391/ADV7392/ADV7393 | ADV7390/ADV7391/ADV7392/ADV7393 | ADV7390/ADV7391/ADV7392/ADV7393 |
| Device Type | Low-power, chip-scale SD/HD video encoder | Monolithic digital-to-analog video encoder | Monolithic digital-to-analog video encoder | Monolithic digital-to-analog video encoder |
| Video DAC Resolution | 10 bit | 10 bit | 10 bit | 10 bit |
| DAC Supply Voltage | 2.7 V or 3.3 V | 2.7 V or 3.3 V | 2.7 V or 3.3 V | 2.7 V or 3.3 V |
| Supported Analog Video | Composite CVBS and S-Video | Composite CVBS and S-Video | Composite CVBS and S-Video | Composite CVBS and S-Video |
| Architecture | Monolithic | Monolithic | Monolithic | Monolithic |
Diferenciadores clave
- Three integrated 10-bit video DACs in one encoder (frente a ADV7391BCPZ)
- Compact 6 mm by 6 mm package for multi-output designs (frente a ADV7390BCPZ)
- Established low-power SD/HD encoder positioning (frente a ADV7393BCPZ)
Notas de diseño
Use the manufacturer pin-description table and reference layout when assigning the 40-LFCSP-WQ lands. Place all required bypass capacitors adjacent to their specified power pins, provide a low-impedance ground reference beneath the package where the footprint allows, and route analog video outputs away from high-current switching nodes. Do not infer connections from family position because small power, control, and output differences can make a visually similar encoder electrically unsuitable.
Keep synchronization and digital timing traces short, with continuous return paths, while routing the three analog video outputs as controlled analog signals. Separate video outputs from clock, regulator-switching, and digital return currents where the board stack-up permits. Apply the manufacturer's recommended output impedance, coupling, and filtering network rather than substituting a generic composite-video network. Validate eye quality and synchronization timing with the required SD or HD test pattern.
Do not substitute ADV7390BCPZ, ADV7391BCPZ, or ADV7393BCPZ solely because all three use the same 40-LFCSP-WQ outline. Confirm DAC count, supported output modes, pipeline timing, enable behavior, control logic, and electrical limits in the official family data sheet. Also treat reel and tape-and-reel order-code variants as the same technical device, not separate alternatives, and plan lifecycle mitigation because the manufacturer marks the ADV7392 as not recommended for new designs.
Información de cumplimiento
The manufacturer product page identifies the ADV7392 as not recommended for new designs. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are stated in the cited product results.
