AFS600-1PQ208 - 600K-Gate Mixed-Signal FPGA | Microchip Technology
N.º de pieza: AFS600-1PQ208 ✗ Fin de vidaAFS600-1PQ208 Descripción general
An FPGA is a reconfigurable semiconductor whose internal digital logic, memory blocks, and configurable I/O are programmed after manufacture. A mixed-signal FPGA extends this programmable-logic category by adding configurable analog blocks alongside digital logic, flash memory, clock-management resources, and high-performance I/O. The AFS600 belongs to the Fusion family, which is designed for mixed-signal embedded processing rather than purely fixed-function logic. This positioning makes it relevant to industrial control, communications, instrumentation, embedded systems, and legacy platform designs that require flexible hardware configuration.
Key features of the AFS600-1PQ208 include 600,000 system gates, 110,592 total RAM bits, 95 user I/O pins, a 1.5 V core supply, and a 208-BFQFP package. The supplied distributor listing identifies the device as a 208-BFQFP Fusion FPGA, while a product-page snippet also describes it as a 0.22 micron CMOS device and identifies 600,000 system gates, 110,592 total RAM bits, 95 user I/O pins, and the 1.425 V to 1.575 V core-voltage range. The 130 nm process description appears in the supplied datasheet-search result, so it is retained as a verified reference without extending it to unsupported electrical details.
The device is intended for designs requiring embedded programmable logic, mixed-signal interfacing, memory, clocking, and communications functions. Typical uses include industrial automation and factory control, networking and communication equipment, test and measurement systems, embedded control platforms, and legacy FPGA migrations where the existing 208-BFQFP footprint must be retained. The 95 user I/O count provides a useful balance between logic capacity and board-routing flexibility, while the integrated analog and digital resources can reduce the need for separate programmable components in mixed-signal designs.
Designers should verify the exact pinout, supported I/O standards, configuration method, clock requirements, power sequencing, and analog operating limits against the manufacturer datasheet before layout or replacement work. The PQ208 package is specifically identified in the supplied cross-reference material as an exception to general Fusion-family package compatibility, so substitution should not be based only on gate count or family name. A replacement must be checked for exact package, pinout, voltage, configuration, and timing compatibility.
This page consolidates the supplied manufacturer and distributor references, distinguishes verified electrical facts from unavailable parameters, and records package-specific replacement constraints for AFS600-1PQ208. It is intended to accelerate engineering review while avoiding unsupported claims about pricing, pin assignments, or unverified equivalents.
Alternativas directas para AFS600-1PQ208 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
AFS600-1PQ208I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
AFS600-PQ208I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
M1AFS600-1PQ208
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
AFS600-1PQ208 Valores máximos y características eléctricas
| Device Type | Fusion mixed-signal FPGA |
| System Gates | 600,000 gates |
| Total RAM | 110,592 bits |
| User I/O Pins | 95 pins |
| Core Supply Voltage | 1.5 V nominal; 1.425 V to 1.575 V operating range |
| Logic Family | CMOS |
| Process Technology | 130 nm flash-based CMOS |
| Encapsulado | 208-BFQFP |
| Package Pin Count | 208 pins |
| Temperatura de funcionamiento | 0 °C to 85 °C (32 °F to 185 °F) |
| Device Description | Fusion Field Programmable Gate Array (FPGA) |
| FPGA Architecture | Mixed-signal programmable logic with configurable analog resources, embedded memory, clock generation, and communications peripherals |
| Tipo de montaje | Surface-mount BQF package |
| Manufacturer Reference | Microsemi Corporation / Microchip Technology |
Guía de configuración de pines de AFS600-1PQ208 208 pins
Configuración de pines para AFS600-1PQ208 (encapsulado 208 pins). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para AFS600-1PQ208.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
AFS600-1PQ208 es adecuado para 6 aplicacións: Industrial Automation and Factory Control, Networking and Communication Equipment, Test and Measurement Systems, Embedded Mixed-Signal Control, Legacy Platform FPGA Migration, Programmable Data Acquisition.
Industrial Automation and Factory Control
The AFS600-1PQ208 fits factory-control logic where programmable digital functions, embedded RAM, and mixed-signal integration can consolidate control tasks. Its 600,000 system gates provide substantial logic capacity, while 110,592 RAM bits support state storage, buffering, and protocol handling. The 95 user I/O pins provide connection flexibility for sensors, actuators, counters, and digital interfaces. At a 1.5 V nominal core voltage and a listed 0 °C to 85 °C range, it is appropriate for controlled industrial equipment when the detailed I/O and timing specifications meet the system requirements.
Recomendado
Networking and Communication Equipment
The AFS600-1PQ208 can implement communication-facing protocol logic because it combines 600,000 system gates with 110,592 RAM bits and 95 user I/O in one mixed-signal FPGA. Engineers can use programmable logic for packet framing, state machines, buffering, and interface timing while keeping the design adaptable. Its 208-BFQFP package also offers a defined route for existing platform reuse. Final deployment requires verification of supported I/O standards, clocking, configuration scheme, and system-level protocol timing against the manufacturer datasheet.
Recomendado
Test and Measurement Systems
The AFS600-1PQ208 is applicable to configurable test and measurement logic that benefits from high gate count, embedded RAM, and many user I/O pins. The 95 configurable I/O can support acquisition channels, digital controls, sequencing, and data-path logic, while the mixed-signal resources make the Fusion architecture relevant to instrumentation designs. Its 1.425 V to 1.575 V core-voltage range and 0 °C to 85 °C listed operating range support ordinary indoor commercial-industrial equipment, subject to precision, bandwidth, and calibration requirements not established by the supplied excerpts.
Recomendado
Embedded Mixed-Signal Control
The AFS600-1PQ208 is suited to embedded mixed-signal control because it combines programmable logic with configurable analog resources in one 208-BFQFP device. The 600,000 system gates and 110,592 RAM bits can support control sequencing, data processing, and stateful interfaces, while the 95 user I/O expand board-level connectivity. Using the Fusion architecture can simplify partitioning between analog and digital functions compared with separate programmable devices. Designers must confirm analog input ranges, output characteristics, routing flexibility, accuracy, and power behavior from the full manufacturer documentation before schematic sign-off.
Recomendado
Legacy Platform FPGA Migration
The AFS600-1PQ208 is relevant to maintenance and lifecycle-extension work that must preserve a 208-BFQFP board position. Its 600,000 system gates, 110,592 RAM bits, and 95 user I/O provide a fixed set of design targets for comparing an obsolete or constrained legacy FPGA. The supplied cross-reference material warns that PQ208 is an exception to general Fusion pin compatibility, so migration is not automatically safe. Engineers should compare every power, ground, configuration, clock, I/O, and NC connection before treating a same-family ordering code as interchangeable.
Recomendado
Programmable Data Acquisition
The AFS600-1PQ208 can serve in programmable data-acquisition front ends where digital logic must coordinate multiple I/O channels and temporary data storage. Its 110,592 RAM bits are useful for buffering, sample handling, and control state, while 95 user I/O provide connections to converters, sensors, and digital instrumentation. The mixed-signal Fusion structure allows analog and programmable digital functions to be considered within one device. Exact acquisition performance depends on supported I/O, analog characteristics, clocking, and timing data that must be verified in the complete manufacturer datasheet.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para AFS600-1PQ208 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | AFS600-1PQ208I | AFS600-PQ208I | M1AFS600-1PQ208 |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-BFQFP | 208-BFQFP family | 208-BFQFP family | 208-BFQFP family |
| Device Family | Fusion mixed-signal FPGA | AFS600 Fusion mixed-signal FPGA | AFS600 Fusion mixed-signal FPGA | AFS600 Fusion mixed-signal FPGA |
| System Gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates |
| Total RAM | 110,592 bits | 110,592 bits | 110,592 bits | 110,592 bits |
Diferenciadores clave
- Exact 208-BFQFP product family and device capacity (frente a AFS600-1PQ208I)
- Established 95-user-I/O mixed-signal platform (frente a AFS600-PQ208I)
- Direct same-family ordering-code candidate (frente a M1AFS600-1PQ208)
Notas de diseño
Do not treat a shared PQ208 package name as proof of a pin-compatible replacement. The supplied cross-reference result explicitly identifies the AFS250 and AFS600 PQ208 combination as an exception to general Fusion package compatibility. Before substituting AFS600-1PQ208I, AFS600-PQ208I, or M1AFS600-1PQ208, compare the manufacturer pin tables for power, ground, configuration pins, clock inputs, analog resources, user I/O, and no-connect positions.
Budget the core rail around the verified 1.5 V nominal operating range of 1.425 V to 1.575 V, but do not infer total device power from that voltage alone. Static consumption, dynamic consumption, I/O loading, clock activity, and analog biasing all affect current. Use the datasheet power tables and current configuration to size the regulator and decoupling network; the supplied excerpts do not contain enough data for a defensible power estimate.
Preserve the manufacturer's recommended decoupling and power-plane arrangement when retaining or reusing a PQ208 layout. Place local bypass capacitors at the relevant supply pins, provide a low-impedance return path, and keep sensitive clock and configuration routing away from noisy switching nodes. Because the complete pinout and analog routing guidance are not present in the supplied data, the official package drawing and layout guidance should control the layout.
Validate configuration, programming, and startup behavior in addition to pin compatibility. A functionally capable FPGA can still require different programming interfaces, configuration voltages, or dedicated pins. For an AFS600-1PQ208 replacement, perform a bitstream, timing, I/O-standard, clock, and power-state comparison using the exact manufacturer ordering codes rather than relying on the device-family name.
Información de cumplimiento
The supplied references do not extract RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable because this is a general-purpose mixed-signal FPGA rather than an automotive-qualified device, and no automotive qualification is stated.
