AKM (Asahi Kasei Microdevices)

AK4556VT - 24-Bit 192kHz Stereo Audio Codec | AKM

N.º de pieza: AK4556VT ✓ Activo
3 V Vdss 20-pin TSSOP Package
MOQ: 1 |

AK4556VT Descripción general

The Asahi Kasei Microdevices AK4556VT is a low-voltage, 24-bit stereo audio codec with two ADCs, two DACs, sampling-rate support up to 216 kHz, and a 20-pin TSSOP package. It delivers 103 dB ADC SNR and 106 dB DAC SNR while supporting low-voltage, battery-powered digital audio subsystems.

An audio codec is a mixed-signal interface IC that converts analog microphone or line-level signals into digital PCM audio and converts digital PCM audio back into analog output signals. Within the semiconductor hierarchy, the AK4556VT belongs to the audio codec class, combines an ADC and DAC with digital audio interfaces, and ultimately serves as a power management and signal-conversion component within a digital audio subsystem.

The codec's principal features include 24-bit conversion, operation at a 3 V supply, support for sampling rates through 216 kHz, and an integrated switched-capacitor filter that reduces jitter sensitivity. Its ADC path reaches 103 dB SNR, while its DAC path reaches 106 dB SNR. Single-ended analog inputs and outputs reduce pin count and simplify the external filtering and signal-chain design.

The AK4556VT integrates two analog-to-digital converters and two digital-to-analog converters in one compact package. This integration allows a system to share one device for capture and playback, reducing component count and board area compared with separate ADC and DAC packages. The switched-capacitor filtering approach helps suppress sensitivity to digital clock jitter, an important consideration in systems where the audio master clock originates from a remote or asynchronous source.

Typical uses include battery-powered portable audio, digital recording equipment, USB and wireless audio accessories, headset interfaces, compact consumer electronics, and embedded audio subsystems. The low 3 V operating supply is particularly useful when the codec must operate from a single-cell battery or a tightly regulated low-voltage rail.

PCB design should prioritize short, quiet analog routing, solid return paths, and separation between digital clock and sensitive audio signals. Place the required bypass and analog filter components close to their associated pins, and follow the manufacturer's reference layout and component values for production designs.

This product page consolidates the AK4556VT's key conversion specifications, package details, application guidance, design notes, and sourcing information. It also distinguishes true drop-in replacements from functional audio-codec alternatives that may require different packages, interfaces, or external circuitry.

Alternativas directas para AK4556VT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

AK4556VT Especificaciones

Converter Resolution 24 bit
Nominal Sampling Rate 192 kHz
Maximum Supported Sampling Rate 216 kHz
ADC Signal-to-Noise Ratio 103 dB
DAC Signal-to-Noise Ratio 106 dB
Tensión de alimentación de funcionamiento 3 V
ADC Channel Count 2 channels
DAC Channel Count 2 channels
Analog Input Configuration Single-ended
Analog Output Configuration Single-ended
Jitter Reduction Architecture Integrated switched-capacitor filter
Rango de temperatura de funcionamiento -40 °C to +85 °C
Encapsulado 20-pin TSSOP

Guía de configuración de pines de AK4556VT 20-pin tssop

Configuración de pines para AK4556VT (encapsulado 20-pin tssop). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 20-pin tssop para AK4556VT

No hay datos detallados de patillaje disponibles para AK4556VT.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

AK4556VT es adecuado para 6 aplicacións: Battery-Powered Portable Audio, Digital Recording Equipment, USB and Wireless Audio Accessories, Headset and Microphone Interfaces, Consumer Audio Subsystems, Embedded Audio Test and Measurement.

📱

Battery-Powered Portable Audio

The AK4556VT fits portable recorders and compact personal-audio products that require both analog capture and digital playback. Its 3 V operating supply supports low-voltage battery-powered subsystems, while the integrated two-ADC and two-DAC configuration avoids separate converter packages. According to the manufacturer datasheet, the codec supports 24-bit audio through 216 kHz and delivers 103 dB ADC SNR and 106 dB DAC SNR. The switched-capacitor filter reduces sensitivity to clock jitter, which is valuable when the master clock is derived from an asynchronous source.

🎙️

Digital Recording Equipment

The AK4556VT is suitable for compact recorders that need high-quality stereo capture and playback in one footprint. Its two 24-bit ADCs support dual-channel conversion, and the two DACs provide matching playback channels without requiring a separate stereo DAC. The manufacturer reports 103 dB ADC SNR and 106 dB DAC SNR, providing a useful dynamic-range balance for professional or consumer recording products. Operation from a 3 V supply also supports compact systems where analog headroom, board area, and power conversion complexity must be tightly controlled.

🌐

USB and Wireless Audio Accessories

The AK4556VT can provide the analog conversion endpoint for USB, Bluetooth, and other digital-audio accessories. Its digital interface accepts serial audio data for conversion into stereo analog outputs, while its ADC path captures analog microphone or line inputs for digital transmission. Support for sampling rates through 216 kHz accommodates high-resolution playback and capture, and the switched-capacitor filter improves tolerance of jitter associated with asynchronous digital sources. Designers should isolate the codec's analog return paths from USB or radio-frequency switching circuitry.

🎧

Headset and Microphone Interfaces

The AK4556VT is appropriate for headset modules, microphone preprocessors, and compact voice-capture products that need full-duplex conversion. Two single-ended ADC channels and two single-ended DAC channels support a practical stereo capture-and-playback arrangement while reducing the number of external pins and filter stages. Its 106 dB DAC SNR and 103 dB ADC SNR establish strong conversion performance for a compact 20-pin TSSOP device. The 3 V supply is especially useful in battery-operated accessories where every stage must operate within a restricted power budget.

🔊

Consumer Audio Subsystems

The AK4556VT suits consumer devices requiring stereo analog input and output around a digital audio processor. Integration of two ADCs and two DACs reduces the component count for playback, capture, line-in, and line-out functions. Its 24-bit resolution, 216 kHz maximum sampling-rate support, and 106 dB DAC SNR support high-quality media playback and multirate system designs. Because the package is only 20-pin TSSOP and operates from 3 V, it also supports compact soundbars, media accessories, and space-constrained embedded audio products.

🖥️

Embedded Audio Test and Measurement

The AK4556VT can serve as the audio conversion element in compact test, monitoring, and signal-analysis equipment. Its stereo ADC and DAC channels enable loopback-style signal paths, while the 103 dB ADC SNR and 106 dB DAC SNR provide useful conversion performance for verifying digital audio chains. Sampling-rate support through 216 kHz covers high-resolution test signals. The integrated switched-capacitor filter reduces sensitivity to jitter, helping preserve measurement integrity when the digital audio master clock originates outside the codec.

What is the AK4556VT?
The AK4556VT is a low-voltage, 24-bit stereo audio codec with two ADCs, two DACs, and support for sampling rates up to 216 kHz. According to the manufacturer datasheet, the device provides 103 dB ADC SNR and 106 dB DAC SNR for digital audio systems. It is housed in a compact 20-pin TSSOP package and is intended for low-voltage, battery-powered audio equipment.
Where can I download the AK4556VT datasheet PDF?
The AK4556VT datasheet PDF is available from the manufacturer-document links listed in the data sources for this page. The primary document identifies the AK4556 as a 24-bit, low-voltage audio codec supporting sampling rates up to 216 kHz, with 103 dB ADC SNR and 106 dB DAC SNR. Use the pin-description table and electrical-characteristics sections when planning the PCB and selecting external filter components.
Where can I find the AK4556VT pinout?
The AK4556VT pin assignments are defined in the manufacturer datasheet's pin-description table. The component uses a 20-pin TSSOP package with single-ended analog inputs and outputs, digital audio connections, clock connections, power rails, and ground pins. Consult the datasheet before routing tracks because exposed-pad or thermal-layout requirements are not established by the general package name alone.
What are the key specifications of AK4556VT that engineers should know?
The AK4556VT combines two 24-bit ADCs and two 24-bit DACs in a 20-pin TSSOP package operating from a 3 V supply. According to the manufacturer datasheet, it supports sampling rates up to 216 kHz, reaches 103 dB ADC SNR and 106 dB DAC SNR, and uses an integrated switched-capacitor filter to reduce jitter sensitivity. Its single-ended analog architecture also reduces external filtering requirements.
What is the output noise of the AK4556VT?
The manufacturer rates the AK4556VT DAC path at 106 dB signal-to-noise ratio. This figure is the most relevant published performance indicator for the playback converter and is useful when comparing it with lower-dynamic-range codec options. Exact noise conditions and measurement bandwidth should be taken from the electrical-characteristics table because operating mode and analog gain can affect the test condition.
Is the AK4556VT suitable for battery-powered audio devices?
Yes, the AK4556VT is specifically described as a low-voltage codec for battery-powered digital audio subsystems. Its 3 V operating supply and integrated switched-capacitor filter support low-power system architectures while reducing discrete component count. The manufacturer also reports 103 dB ADC SNR and 106 dB DAC SNR, allowing portable equipment to retain useful dynamic range without a separate converter for each direction.
What can replace the AK4556VT?
The AK4556VT can be replaced only after confirming pin, interface, supply, clock, and analog-signal compatibility. CS4270, PCM1808, and WM8731 are identified as functional equivalents, but they are not established here as pin-to-pin drop-ins. In particular, PCM1808 is described as a stereo ADC and therefore does not reproduce the AK4556VT's integrated ADC-plus-DAC function without additional circuitry.
Is the AK4556VT the same as the PCM1808?
No, the AK4556VT and PCM1808 are not established as the same device. The AK4556VT integrates two ADCs and two DACs with 24-bit conversion, while PCM1808 is identified as a 24-bit stereo ADC that requires a separate DAC for complete codec functionality. Their digital interfaces, clocking, analog levels, and package pinouts must be compared before either device can replace the other.
AK4556VT vs CS4270 - which is better for a portable audio design?
The AK4556VT is the clearer choice when a design needs a documented low-voltage 3 V codec with integrated ADC and DAC paths. According to the manufacturer datasheet, it supports 24-bit audio through 216 kHz and provides 103 dB ADC SNR and 106 dB DAC SNR. CS4270 may suit a different interface or power architecture, but a portable-design decision should follow a complete comparison of pinout, clocks, supply voltage, and digital protocol.
AK4556VT vs WM8731 - when should I choose the AK4556VT?
Choose the AK4556VT when your design specifically benefits from its 24-bit, 192 kHz-class stereo codec architecture, 216 kHz sampling support, and published 103 dB ADC and 106 dB DAC performance. WM8731 is identified as a functional equivalent, but it is not confirmed as a pin-compatible replacement here. Verify the digital serial interface, master-clock requirements, analog gain structure, and PCB footprint before selecting either part.
When should I choose AK4556VT over an ADC-only codec alternative?
Choose the AK4556VT over an ADC-only solution when the design requires both microphone or line capture and stereo playback from one package. The AK4556VT provides two ADCs and two DACs, 24-bit conversion, and support through 216 kHz in a 20-pin TSSOP. An ADC-only codec may reduce cost when playback is handled elsewhere, but it requires another converter and additional analog or digital interconnection.
Is the AK4556VT a drop-in replacement for another 20-pin audio codec?
The AK4556VT cannot be treated as a universal 20-pin drop-in replacement. Matching the TSSOP-20 package does not establish compatible power pins, analog levels, clock connections, digital audio signals, or control functions. The cross-reference candidates identified for this device are functional equivalents rather than confirmed pin-to-pin replacements, so PCB reuse requires a complete datasheet-level pin comparison.
What is the best AKM equivalent for AK4556VT?
AK4556VN is the closest named AKM-family alternative identified for the AK4556VT, but it is offered in a different package and is therefore not a drop-in replacement on the same PCB. The AK4556VT-E2 listing represents another ordering or packaging designation rather than a distinct functional upgrade. For an AKM selection, compare package, pinout, temperature range, digital interface, and clock requirements before making a substitution.
Where can I buy AK4556VT online and what is its price?
Use the Request a Quote form on this page to request AK4556VT pricing, stock confirmation, and current lead time. The form is the appropriate route because market prices and inventory can change independently of the product's technical specifications. When planning a purchase, provide the required quantity, package variant, target delivery date, and whether reel, cut-tape, or other packing is acceptable.
How long is the lead time for AK4556VT?
The current AK4556VT lead time must be confirmed through the Request a Quote form on this page. Availability can vary with order quantity, package format, and production conditions, so a catalog description alone does not establish a ship date. For production planning, state the required annual usage, forecast quantity, approved vendor status, and delivery deadline when submitting the request.

Datos de referencia de ingeniería para AK4556VT — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the AK4556VT when the design needs a compact, low-voltage stereo codec that combines capture and playback, supports 24-bit audio through 216 kHz, and can operate from a 3 V rail. Its 103 dB ADC SNR and 106 dB DAC SNR make it appropriate for portable recorders, wireless audio accessories, headset modules, and space-constrained consumer products. CS4270, PCM1808, and WM8731 may be considered when another digital interface, clock arrangement, or converter split better fits the system, but none is established here as a pin-to-pin replacement. AK4556VN and AK4556VT-E2 also require package or ordering-option review. For a production PCB change, compare the complete pin map, digital protocol, clock mode, analog levels, external filter network, and supply requirements rather than relying on package dimensions or resolution alone.

Comparación con alternativas

Parámetro Este producto
Package 20-pin TSSOP
Brand Asahi Kasei Microdevices
Converter Resolution 24 bit
Nominal Sampling Rate 192 kHz
Maximum Sampling Rate 216 kHz
ADC Signal-to-Noise Ratio 103 dB
DAC Signal-to-Noise Ratio 106 dB
ADC Channel Count 2 channels
DAC Channel Count 2 channels
Operating Supply Voltage 3 V
Analog Signal Configuration Single-ended inputs and outputs
Jitter Sensitivity Reduction Integrated switched-capacitor filter

Diferenciadores clave

  • Full-duplex conversion in one compact package (frente a PCM1808)
  • High sampling-rate coverage for compact audio products (frente a CS4270)
  • Single-ended analog architecture reduces external filtering requirements (frente a WM8731)

Notas de diseño

Use the manufacturer reference layout as the starting point for the AK4556VT PCB. Place bypass capacitors, clock components, and analog filter components close to their associated pins, and provide a low-impedance ground return beneath the device where the package and board stackup permit. Keep clock and data traces away from microphone and line-input nets to prevent the codec's 103 dB ADC dynamic range from being degraded by coupling from the digital interface.

The AK4556VT operates from a 3 V supply, so the analog and digital rails must remain within the limits stated in the manufacturer datasheet. Route supply current through low-impedance planes or traces and place local decoupling at the power pins. If digital audio traffic, amplifier output stages, or radio circuitry share the board, use controlled partitioning or additional filtering so converter supply noise does not appear directly in the analog output.

Preserve the integrity of the master clock and serial audio signals because the codec uses an integrated switched-capacitor filter to reduce jitter sensitivity. Route clock lines away from analog inputs, avoid long stubs, and use a continuous reference plane beneath high-speed digital nets. When a remote or asynchronous source supplies the clock, verify startup and lock behavior at every supported sampling rate instead of assuming equivalent jitter performance.

Do not treat the 20-pin TSSOP package as proof that another codec is interchangeable. Even parts with similar channel counts and resolution can assign power, ground, clocks, data, and control signals differently. Confirm the complete pin-description table, analog input range, digital protocol, master-clock mode, and power-up sequence before revising a PCB. The named AK4556 alternatives are functional comparisons, not confirmed drop-in replacements.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance status is not established by the available product information. Use the manufacturer datasheet or current manufacturer material declaration for production qualification.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

ak4556vt datasheet akm ak4556vt AK4556VT datasheet pdf AK4556VT pinout AK4556VT 24 bit codec AK4556VT 216 kHz AK4556VT TSSOP-20 AK4556VT equivalent AK4556VT drop-in replacement AK4556VT vs CS4270 AK4556VT audio codec application AK4556VT price AK4556VT stock

Componentes & términos relacionados

Asahi Kasei Microdevices AK4556VT AK4556VN AK4556VT-E2 CS4270 PCM1808 WM8731 audio codec mixed-signal IC ADC DAC digital audio subsystem 24-bit conversion 192 kHz sampling 216 kHz sampling 103 dB ADC SNR 106 dB DAC SNR switched-capacitor filter jitter sensitivity single-ended analog I/O 3 V power supply TSSOP-20 surface-mount package battery-powered audio
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ