Microchip Technology

ATTINY12V-1SU - 8-Bit 1KB AVR MCU | Microchip Technology

N.º de pieza: ATTINY12V-1SU ✓ Activo
1.8 V to 5.5 V Vdss 8-pin SOIC Package 1.2 MHz Speed 1 KB Memory
MOQ: 1 |

ATTINY12V-1SU Descripción general

The Microchip Technology ATTINY12V-1SU is an 8-bit AVR RISC microcontroller with 1 KB of Flash program memory, 64 bytes of EEPROM, a 1.2 MHz operating speed, and an 8-pin SOIC package. It is designed for compact, low-power embedded control applications that require six general-purpose I/O pins and an internal oscillator.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, and basic peripherals onto one package. The ATTINY12V-1SU belongs to the AVR microcontrollers family, where the reduced-instruction-set computer core executes instructions efficiently in a single clock cycle. Its small memory footprint and limited peripheral set make it appropriate for simple control logic rather than general-purpose computing.

Key features include 1 KB of Flash program memory, 64 bytes of EEPROM, 64 bytes of SRAM, and six I/O pins. The device operates from a 1.8 V to 5.5 V supply range and includes an internal oscillator, power-on reset, watchdog timer, and brown-out detection. An operating speed of 1.2 MHz provides sufficient processing capability for compact sensors, basic motor controllers, and simple consumer-product functions.

The AVR RISC architecture provides efficient instruction execution while keeping the device economical in both board area and power consumption. Program and data memories are organized for firmware-oriented embedded use, while EEPROM preserves small amounts of configuration or calibration data across power cycles. The internal oscillator eliminates the need for an external clock source in designs that do not require precise timing.

Typical uses include low-cost control boards, LED indicators, battery-operated accessories, simple sensor interfaces, and compact power-management controllers. The six available I/O pins support digital input and output functions, while the internal watchdog provides a mechanism for recovering from unexpected program-flow faults. The SOIC package also makes the device practical for leaded-assembly and conventional surface-mount PCB layouts.

When designing around ATTINY12V-1SU, account for the limited 1 KB program memory when selecting application code and bootloader features. Keep decoupling close to the supply pins, use the brown-out and watchdog functions where reliability matters, and confirm the programmed operating voltage before driving external loads. Its strengths are simplicity, low cost, and compactness rather than high processing throughput or extensive connectivity.

This page combines package, memory, power, and lifecycle information with practical design guidance, sourcing instructions, and a requirement-focused comparison. It also identifies where direct drop-in alternatives are justified, helping engineers distinguish true pin-compatible substitutions from devices that merely belong to the broader microcontroller category.

Alternativas directas para ATTINY12V-1SU — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

ATTINY12V-1SU Valores máximos y características eléctricas

Product Type 8-bit RISC microcontroller
Architecture AVR RISC
Core Processor 8-bit AVR
Flash Program Memory 1 KB
EEPROM 64 bytes
SRAM 64 bytes
Operating Speed 1.2 MHz
Supply Voltage Range 1.8 V to 5.5 V
Internal Oscillator Yes
I/O Pin Count 6 pins
Power-On Reset Yes
Watchdog Timer Yes
Brown-Out Detection Yes
Encapsulado 8-pin SOIC
Package Width 0.209 inch
Tipo de montaje Surface mount
Temperature Grade Industrial temperature

Guía de configuración de pines de ATTINY12V-1SU 0.209 inch

Configuración de pines para ATTINY12V-1SU (encapsulado 0.209 inch). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 0.209 inch para ATTINY12V-1SU

No hay datos detallados de patillaje disponibles para ATTINY12V-1SU.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

ATTINY12V-1SU es adecuado para 6 aplicacións: Compact LED Control, Battery-Powered Sensor Interface, Simple Motor and Relay Control, Consumer Appliance Control, Factory Automation Interface, IoT Device Power and Mode Control.

💡

Compact LED Control

The ATTINY12V-1SU is well suited to compact LED-indicator and status-control boards because it combines an 8-bit AVR core, six I/O pins, 1 KB of Flash memory, and an internal oscillator in an 8-pin SOIC package. It can implement push-button input, debounce logic, state machines, and LED drive patterns without an external clock source. The device's 1.2 MHz operating speed is sufficient for straightforward sequential control, while the 64-byte EEPROM can retain small configuration values such as brightness levels or operating modes. Current limiting or suitable driver electronics remain necessary for LED strings, and the design should use the manufacturer's pin description and decoupling recommendations when laying out the board.

🧩

Battery-Powered Sensor Interface

The ATTINY12V-1SU can act as the controller for a small battery-powered sensor interface where the system requires basic digital sensing rather than intensive computation. Its 1.8 V to 5.5 V supply range supports low-energy operating points, while the internal oscillator reduces component count on compact boards. Six I/O pins can accommodate a simple sensor interface, control signals, and status indication. The 64-byte EEPROM is suitable for calibration constants or configuration flags, and the watchdog timer can recover the controller after an unexpected firmware fault. Battery life still depends on the selected sleep behavior, sensor load, and firmware duty cycle, which should be measured on the finished design.

⚡

Simple Motor and Relay Control

The ATTINY12V-1SU is suitable for basic motor, relay, or latching-load control when the system requires a small state machine rather than sophisticated motion control. Six I/O pins provide control and sensing connections, while the 1.2 MHz AVR core can execute timing and sequencing logic. The watchdog timer improves recovery behavior after faults, and EEPROM can store a small number of operating parameters. Appropriate transistor, driver, flyback, or isolation circuits must protect the controller and reduce electrical noise. The 1 KB program-memory limit should be checked against required motion sequences and safety handling before the design is committed.

🏠

Consumer Appliance Control

The ATTINY12V-1SU fits small consumer appliances and accessories that need a few switches, a compact user interface, and embedded sequencing. Its six I/O pins can be assigned to buttons, indicators, or simple actuator controls, while 1 KB of Flash accommodates a focused application program. The internal oscillator simplifies the bill of materials, and operation from 1.8 V to 5.5 V provides flexibility across compact supply designs. Firmware should use the watchdog timer, power-on reset, and brown-out detection to improve robustness during power transients. The device is best positioned for fixed-function products rather than expandable connected appliances that require more memory, pins, or communication resources.

🏭

Factory Automation Interface

The ATTINY12V-1SU can serve as a local interface controller in factory automation equipment when the required task is limited to monitoring discrete signals and coordinating a simple output. The six I/O pins, 64-byte EEPROM, and 1.2 MHz processing speed are adequate for basic interlocks, status aggregation, or panel logic. The industrial temperature designation supports use across industrial temperature conditions, although the completed product still requires appropriate system-level validation. Industrial control designs should pay particular attention to isolation, surge immunity, grounding, and failure-state behavior. The controller's limited memory and lack of extensive communications make it a secondary local processor rather than a replacement for a networked industrial controller.

📱

IoT Device Power and Mode Control

The ATTINY12V-1SU can act as a low-cost auxiliary controller in compact IoT equipment, handling local button input, mode selection, status indication, or simple power sequencing. Its six I/O pins and 1 KB of program memory suit a narrow supervisory function rather than protocol processing or edge analytics. An internal oscillator eliminates an external timing component, while EEPROM can preserve a small configuration record. The device may also supervise a communications module by translating a simple command into enable or reset signals. Power budget and wake latency should be evaluated because auxiliary circuitry can reduce the energy benefit of a low-power IoT product, and the main processor should handle functions requiring more memory or communication resources.

Resumen de productos recomendados

What is the ATTINY12V-1SU?
The ATTINY12V-1SU is an 8-bit AVR RISC microcontroller with 1 KB of Flash memory, 64 bytes of EEPROM, and six I/O pins in an 8-pin SOIC package. Microchip Technology describes it as a low-power, reduced-instruction-set controller operating at up to 1.2 MHz. It is suited to compact embedded-control products where a small code footprint, internal oscillator, and simple digital interfaces are more important than high processing throughput.
What is the operating voltage of ATTINY12V-1SU?
The ATTINY12V-1SU operates from 1.8 V to 5.5 V. According to the manufacturer product information, this range supports low-voltage and conventional supply implementations while allowing the same controller architecture to serve both energy-conscious and 5 V-oriented designs. The selected regulator, sensor, and external circuitry must remain compatible with the actual supply voltage, and firmware should be configured for the intended operating condition.
What are the key specifications of ATTINY12V-1SU that engineers should know?
The key ATTINY12V-1SU specifications are an 8-bit AVR RISC core, 1.2 MHz maximum operating speed, 1 KB of Flash program memory, 64 bytes of EEPROM, 64 bytes of SRAM, and six I/O pins. The device accepts a 1.8 V to 5.5 V supply, uses an internal oscillator, and is offered in an 8-pin SOIC package. These figures define the device as a compact controller for simple embedded logic.
Where can I download the ATTINY12V-1SU datasheet PDF?
The ATTINY12V-1SU datasheet can be obtained through the Microchip product documentation or the Octopart datasheet page listed on this product page. The manufacturer datasheet is the preferred document because it defines memory organization, electrical characteristics, clock behavior, reset conditions, and the exact 8-pin SOIC pin assignments. Use that pin-description table when creating the PCB footprint and assigning tracks.
Where can I find the ATTINY12V-1SU pinout?
The ATTINY12V-1SU pinout is defined in the manufacturer datasheet for its 8-pin SOIC package. The controller provides six general-purpose I/O pins, with the remaining pins assigned to supply and ground functions. Use the numbered SOIC diagram rather than a generic 8-pin drawing, and confirm the package orientation and pin-1 marker directly against the datasheet before PCB release.
Is ATTINY12V-1SU suitable for low-power embedded control?
The ATTINY12V-1SU is suitable for low-power embedded control when the application fits its 1 KB program-memory limit and six-I/O architecture. Its 1.8 V to 5.5 V supply range, internal oscillator, 64-byte EEPROM, and watchdog timer reduce the need for external components and support compact control designs. Deep-sleep current and exact sleep-mode behavior should be checked for the selected production configuration.
ATTINY12V-1SU vs ATTINY12V-1SI - which one should I choose?
ATTINY12V-1SU and ATTINY12V-1SI are closely related ATTINY12V variants associated with the same 8-pin SOIC format, but their orderable suffix and packaging details must be checked before interchange. Both are identified as 1 KB Flash, 64-byte EEPROM, 1.8 V-class devices. The exact suffix controls the shipment form and qualification terms, so a purchasing substitution should preserve the required package and assembly method.
What can replace ATTINY12V-1SU?
A direct replacement for ATTINY12V-1SU must use the same 8-pin SOIC footprint and provide compatible supply voltage, 1.2 MHz-class timing, Flash, EEPROM, reset, and I/O behavior. The available cross-reference results do not identify enough independently qualified alternatives to recommend one confidently. ATTINY12V-1SI is a close family candidate, but verify its ordering suffix, package form, and production requirements before treating it as a drop-in replacement.
Is ATTINY12V-1SU the same as ATTINY12V-1SUR?
ATTINY12V-1SU and ATTINY12V-1SUR belong to the same ATTINY12V device family and share the core architecture and 8-pin SOIC footprint, but their suffix codes indicate different orderable packaging forms. ATTINY12V-1SUR is identified as a tape-and-reel option, while ATTINY12V-1SU is the form associated with this ordering code. A board design can share the footprint, but production packaging must be selected deliberately.
When should I choose ATTINY12V-1SU over a larger ATtiny microcontroller?
Choose ATTINY12V-1SU when the application needs only simple digital control, approximately 1 KB of program storage, 64 bytes of EEPROM, and six I/O pins. A larger ATtiny is preferable when firmware size, RAM, timer channels, analog resources, communications peripherals, or processing speed exceed those limits. The smaller device can reduce board area and system complexity, but adding features later may exceed its memory and pin constraints.
Is ATTINY12V-1SU suitable for LED and simple motor-control applications?
The ATTINY12V-1SU can control simple LED states or a low-complexity motor-control function when the load, switching requirements, and timing fit six I/O pins and the available code space. Its 1.2 MHz speed, internal oscillator, watchdog timer, and EEPROM are useful for compact controllers. Appropriate transistor or driver circuitry and current limiting are still required; the microcontroller pins must not directly drive loads beyond their ratings.
Where can I buy ATTINY12V-1SU online?
Use the Request a Quote form on this page to request ATTINY12V-1SU availability, current commercial terms, and lead-time confirmation. The request can specify the required package form and quantity. Because inventory and pricing can change quickly, current availability should be confirmed through the quote process rather than inferred from an older catalog entry or a general search listing.
What is the price of ATTINY12V-1SU?
Current ATTINY12V-1SU pricing should be obtained through the Request a Quote form on this page. The form supports quantity-specific commercial review while avoiding a stale fixed figure that may not reflect the selected package form, order quantity, date, or delivery terms. Submit the required quantity and packaging preference to receive an up-to-date quotation for the exact ATTINY12V-1SU ordering code.
What is the lead time for ATTINY12V-1SU?
The current lead time for ATTINY12V-1SU should be confirmed through the Request a Quote form on this page. Include the requested quantity, delivery destination, and production schedule when requesting the quotation. Lead time can vary with order size, package form, component availability, and manufacturing commitments, so it should be confirmed for each procurement request rather than treated as a fixed device characteristic.
Is ATTINY12V-1SU in stock?
ATTINY12V-1SU is identified as an active component, but current stock should be checked through the Request a Quote form on this page. Active lifecycle status indicates that the manufacturer continues to support the device; it does not guarantee that a specific quantity is immediately available. State the required order quantity and preferred shipment form so XAIPART can confirm the current supply position and lead time.
What is the best Microchip equivalent for ATTINY12V-1SU?
The closest Microchip family candidate is ATTINY12V-1SI, which retains the 1 KB Flash, 64-byte EEPROM, 8-pin SOIC, and low-voltage microcontroller characteristics highlighted in the comparison. It should not be treated as an unconditional substitute until the ordering suffix and packaging form are matched. Other listed AVR devices either use different packages, provide substantially more memory, or operate at materially different speeds.

Datos de referencia de ingeniería para ATTINY12V-1SU — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose ATTINY12V-1SU for compact, fixed-function products that need no more than 1 KB of Flash, 64 bytes of EEPROM, and six digital I/O pins. It is a practical option for LED indicators, simple appliance controls, basic sensor interfaces, and local sequencing functions operating from 1.8 V to 5.5 V. Select a larger ATtiny controller when firmware growth, additional timer or communication peripherals, more RAM, or greater processing speed is expected. ATTINY26L-8SC offers an 8 MHz-class alternative but has a different package and profile, so it is not a direct board-level replacement. ATTINY84A-SSFR similarly offers much more performance and memory in another package. For a same-footprint procurement substitution, verify the ATTINY12V ordering suffix, assembly form, and qualification requirements before approving a change.

Comparación con alternativas

Parámetro Este producto
Brand Microchip Technology
Package 8-pin SOIC
Core Architecture 8-bit AVR RISC
Maximum Speed 1.2 MHz
Flash Program Memory 1 KB
EEPROM 64 bytes
SRAM 64 bytes
Supply Voltage Range 1.8 V to 5.5 V
General-Purpose I/O Pins 6 pins
Internal Oscillator Yes
Lifecycle Status Active
Temperature Grade Industrial temperature

Diferenciadores clave

  • Exceptionally compact fixed-function control platform (frente a ATTINY84A-SSFR)
  • Lower clock rating supports simple sequential control (frente a ATTINY26L-8SC)
  • Lower-voltage operating range for compact electronics (frente a ATTINY26L-8SC)

Notas de diseño

Place the supply bypass capacitor immediately across the device's power and ground pins, and route the connection with a short return path to reduce supply impedance during switching. Use the exact pin numbers from the manufacturer pin-description table when creating the 8-pin SOIC footprint. Confirm the pin-1 orientation against the PCB silkscreen and package marker; an 8-pin SOIC footprint is not interchangeable with a TSSOP or other 8-lead package without dimensional verification.

Design the supply for the selected operating point across the full 1.8 V to 5.5 V device range. Brown-out detection can help the firmware respond predictably as the rail declines, but it does not replace correct supply regulation or energy-storage design. Evaluate startup current, input-capacitance requirements, and the current drawn by attached external circuitry. For battery products, measure average and sleep current together with the firmware's duty cycle rather than relying on processor clock speed alone.

The 1 KB program-memory limit is the most important design constraint and should be checked before committing to a feature set. Avoid adding libraries, bootloaders, or communication stacks that consume the available Flash space. Use the watchdog timer for recoverable faults, and write EEPROM updates sparingly because write endurance is finite. Verify pin directions in firmware because the six I/O pins may be shared with alternate peripheral functions or reset-related behavior.

Keep clock-sensitive and switching-sensitive traces away from the device and its bypass capacitor when the board contains motors, relays, or inductive loads. Route high-current actuator paths separately from the microcontroller ground path, and use a compact quiet ground region around the IC. If an external oscillator is ever required, follow the manufacturer's grounding and routing guidance; the ATTINY12V-1SU otherwise benefits from the reduced component count associated with its internal oscillator.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The product is described as an active industrial-temperature device. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product information, so their status remains unknown.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

ATTINY12V-1SU datasheet ATTINY12V-1SU pinout ATTINY12V-1SU datasheet pdf ATTINY12V-1SU specifications ATTINY12V-1SU price ATTINY12V-1SU stock Microchip ATTINY12V-1SU ATTINY12V-1SU equivalent ATTINY12V-1SU replacement ATTINY12V-1SU cross reference ATTINY12V-1SU vs ATTINY26L-8SC ATTINY12V-1SU 8 pin SOIC ATTINY12V-1SU application circuit ATTINY12V-1SU lead time

Componentes & términos relacionados

Microchip Technology ATTINY12V-1SU ATTINY12V-1SI ATTINY12V-1SUR ATTINY26L-8SC ATTINY84A-SSFR AVR RISC architecture 8-bit microcontroller embedded microcontroller Flash program memory EEPROM SRAM internal oscillator power-on reset watchdog timer brown-out detection 1.8 V to 5.5 V supply 1.2 MHz clock SOIC-8 SOIC package family surface mount SMD LED control sensor interface
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ