Broadcom

BCM47452SAF01 - Integrated Wireless RF SoC | Broadcom

N.º de pieza: BCM47452SAF01
MOQ: 1 |
Ficha técnica no disponible Buscar hoja de datos
Ver alternativas

BCM47452SAF01 Descripción general

The Broadcom BCM47452SAF01 is an integrated RF system-on-chip that combines the BCM47452, BCM43525, and BCM54210E components in one device. It is positioned for advanced wireless connectivity products that require coordinated processing, radio connectivity, and wired-network interface functions on a single platform. The device is distributed as a system-on-chip IC, with no package dimensions, pin count, frequency range, or power ratings established by the available product documentation.

A radio system-on-chip, commonly called an RF SoC, integrates multiple semiconductor functions into a common component. In the product hierarchy, an RF SoC belongs to wireless connectivity semiconductors, combining system processing, radio-frequency functions, and often Ethernet or other communications interfaces. This integration can simplify a wireless product's bill of materials, reduce board-level interconnect requirements, and centralize the hardware platform used for wireless networking, connectivity, and embedded control.

The defining feature of the BCM47452SAF01 is its combination of three named Broadcom blocks: the BCM47452, BCM43525, and BCM54210E. The BCM47452 provides the primary application-processing foundation, while the BCM43525 and BCM54210E contribute wireless and wired communications capabilities. This combination makes the part suitable for gateways, routers, enterprise wireless equipment, connected appliances, and other embedded networking products in which radio coexistence and interface integration are central design requirements.

Because the BCM47452SAF01 is an application-specific connectivity SoC, its firmware, host drivers, board support packages, and radio configuration are as important as its electrical specifications. Engineers should evaluate the supported wireless standards, regulatory domains, antenna configuration, Ethernet requirements, operating-system support, and security features against the intended product. The available product listings identify the integrated blocks but do not publish enough detail to confirm these project-specific requirements.

A typical hardware design places the BCM47452SAF01 near the RF and network-connector sections of the PCB. RF routing must preserve controlled impedance and controlled antenna geometry, while digital, power, and Ethernet interfaces require separate return paths and appropriate decoupling. Keep sensitive RF and high-speed network sections away from noisy switching nodes, and follow the manufacturer reference design when reproducing the recommended component placement, layer stack, and power network.

The BCM47452SAF01 is best selected when an existing product has been designed around its integrated Broadcom platform and can reuse validated firmware, drivers, and reference hardware. A redesign that requires different wireless bands, interfaces, regulatory approvals, or memory configurations should not assume drop-in interchangeability. Confirm the complete package, pinout, electrical limits, lifecycle status, and mechanical drawing before committing the part to a new production design.

This page consolidates the identified Broadcom integration details, practical PCB guidance, sourcing workflow, and application-selection criteria. It also distinguishes a shared radio platform from a true pin-to-pin replacement, helping engineering teams avoid treating functionally similar wireless SoCs as mechanically interchangeable components.

Alternativas directas para BCM47452SAF01 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con BCM47452SAF01 (mismo factor de forma y huella) — difiere en Product Type.

Broadcom
Product Type: RF system-on-chip
Comparar con BCM47452SAF01 →

BCM47452SN01

✅ Sustitución directa
Broadcom
📦 Package not published
RF system-on-chip · Broadcom · BCM47452, BCM43570E, BCM54210E · 3 devices · Embedded system-on-chip · RF system-on-chip · Integrated circuit

Consulte el precio

Ver hoja de datos →

BCM47452SAF01 Valores máximos y características eléctricas

Product Type RF system-on-chip (RF SoC)
Manufacturer Broadcom
Integrated Components BCM47452, BCM43525, BCM54210E
Device Classification System On Chip (SoC) IC
Application Classification Advanced wireless connectivity
Wireless Connectivity Integrated wireless radio functions
Wired Network Interface Integrated BCM54210E Ethernet interface functions
Processing Block BCM47452
Radio Block BCM43525
Ethernet Interface Block BCM54210E

Guía de configuración de pines de BCM47452SAF01 standard

Configuración de pines para BCM47452SAF01 (encapsulado standard). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado standard para BCM47452SAF01

No hay datos detallados de patillaje disponibles para BCM47452SAF01.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

BCM47452SAF01 es adecuado para 6 aplicacións: Wireless Router Platforms, Enterprise Wireless Gateways, Connected Home Appliances, Wireless Network Bridges, Industrial Wireless Gateways, Embedded Networking Controllers.

🌐

Wireless Router Platforms

The BCM47452SAF01 is well suited to a wireless router because it combines the BCM47452 processing block, BCM43525 radio block, and BCM54210E Ethernet interface functions in one RF SoC. A router implementation can use this integration to consolidate control, wireless connectivity, and wired networking into a compact platform. The principal design consideration is radio configuration: antenna paths, regulatory domains, supported wireless bands, and the required Ethernet topology must match the selected Broadcom firmware and reference design.

🏭

Enterprise Wireless Gateways

An enterprise wireless gateway can use the BCM47452SAF01 to combine embedded processing, wireless radio connectivity, and Ethernet functions on one SoC. This integration is valuable when product space is constrained and the gateway must coordinate radio traffic with wired backhaul. Before committing to the device, validate the number of network interfaces, management features, security requirements, antenna configuration, and long-term software support against the controlled Broadcom platform documentation.

🧩

Connected Home Appliances

The BCM47452SAF01 can support connected appliances that need wireless connectivity and a wired network interface within a single embedded platform. Combining the BCM47452, BCM43525, and BCM54210E reduces the number of separately managed communications components and creates a unified software target for control and connectivity. Appliance developers should still check enclosure-related radio behavior, antenna placement, thermal conditions, cybersecurity support, and update requirements before releasing the design.

📶

Wireless Network Bridges

A wireless network bridge benefits from the BCM47452SAF01 when its enclosure must support local wireless connectivity, processing, and Ethernet bridging in a compact assembly. The integrated BCM54210E component supplies the wired-network side while BCM43525 supports wireless communication and BCM47452 handles the platform's processing functions. The reference design should define controlled-impedance routing, Ethernet magnetics compatibility, radio isolation, grounding, and regulatory-compliant antenna geometry.

⚡

Industrial Wireless Gateways

The BCM47452SAF01 can serve as the communications centerpiece of an industrial wireless gateway when the product requires embedded control, radio connectivity, and Ethernet backhaul. Consolidation simplifies the hardware boundary between processing and communications, while still demanding careful separation of radio, network, and power domains. Industrial qualification should be evaluated at the finished-product level because package temperature ratings, radio approvals, EMC results, and environmental certification are not established by the component listings.

🖥️

Embedded Networking Controllers

The BCM47452SAF01 is applicable to embedded networking controllers that combine a system processor, wireless radio, and Ethernet interface in one enclosure. This arrangement can shorten the design cycle when the team can reuse Broadcom firmware, drivers, and an established reference layout. The decisive checks are boot behavior, memory configuration, interface mapping, firmware licensing, radio coexistence, and upgrade mechanisms; these must be aligned with the exact product revision before production design begins.

Resumen de productos recomendados

BCM47452 Integrated application-processing component Se usa en: Wireless Router Platforms, Enterprise Wireless Gateways, Wireless Network Bridges, Industrial Wireless Gateways, Embedded Networking Controllers BCM54210E Integrated Ethernet interface component Se usa en: Wireless Router Platforms, Connected Home Appliances, Wireless Network Bridges, Embedded Networking Controllers BCM43525 Integrated wireless radio component Se usa en: Enterprise Wireless Gateways, Connected Home Appliances, Industrial Wireless Gateways
What is the BCM47452SAF01?
The BCM47452SAF01 is a Broadcom RF system-on-chip combining the BCM47452, BCM43525, and BCM54210E in one wireless-connectivity device. The manufacturer product information identifies the device as an RF SoC designed for advanced wireless connectivity applications. Its integrated architecture is intended to reduce the number of discrete components required in routers, gateways, and other connected networking equipment while providing a common hardware and software platform.
Which functions are integrated into BCM47452SAF01?
The BCM47452SAF01 integrates three named Broadcom components: the BCM47452, BCM43525, and BCM54210E. According to Broadcom product descriptions, this combination provides application processing, wireless radio connectivity, and Ethernet interface functions within one RF SoC. Exact antenna options, supported PHY configurations, and interface lane counts should be confirmed in the complete manufacturer documentation before final board design.
Where can I find the BCM47452SAF01 datasheet PDF?
The BCM47452SAF01 datasheet PDF should be obtained from Broadcom's controlled product-documentation channel or through the datasheet link on an authorized component listing. The available product pages confirm that documentation exists for this MPN, but they do not expose a stable manufacturer PDF URL. Request the controlled datasheet and its package drawing through the Request a Quote form on this page when a traceable copy is required for design release.
Where can I find the BCM47452SAF01 pinout?
The BCM47452SAF01 pinout is defined by the controlled Broadcom package drawing and pin-description table. The available product information does not identify the package type, pin count, exposed-pad arrangement, or individual pin names, so a PCB symbol or diagram cannot be generated safely from those listings alone. Use the manufacturer pin-description table to assign every power, ground, RF, Ethernet, and control connection before releasing a PCB layout.
What wireless applications use BCM47452SAF01?
The BCM47452SAF01 fits wireless products that combine processing, a radio subsystem, and Ethernet connectivity in one platform. Typical design categories include wireless routers, enterprise gateways, connected appliances, and embedded networking equipment. The final fit depends on supported radio bands, antenna configuration, regional regulatory approval, firmware support, and the number and type of external network interfaces required by the product.
What is the difference between BCM47452SAF01 and a discrete radio design?
The BCM47452SAF01 combines the BCM47452, BCM43525, and BCM54210E functions in one RF system-on-chip, while a discrete design implements comparable processing, radio, and Ethernet functions as separate components. Integration can simplify routing, reduce component count, and centralize firmware and driver support. The trade-off is reduced flexibility because the product is tied to the integrated platform, supported radio configurations, and validation performed for that Broadcom solution.
Is BCM47452SAF01 suitable for a wireless router?
The BCM47452SAF01 is suitable for a wireless router when the design can use its integrated BCM47452, BCM43525, and BCM54210E architecture. A router design should verify required Wi-Fi generations and bands, antenna paths, regulatory approvals, Ethernet port topology, memory requirements, and firmware compatibility. These checks must be completed against the controlled product documentation before the SoC is approved for production.
BCM47452SAF01 vs BCM47452SAF00: which is better?
The BCM47452SAF01 and BCM47452SAF00 cannot be compared reliably from the available product information because no difference in electrical limits, package, supported radio features, or firmware baseline is established. Treat them as distinct orderable MPNs until the manufacturer change documentation identifies their relationship. If an existing design is being revised, obtain the controlled product brief and release notes rather than assuming suffix interchangeability.
When should I choose BCM47452SAF01 over another wireless SoC?
Choose the BCM47452SAF01 when an existing design can reuse its integrated BCM47452, BCM43525, and BCM54210E platform and the required radio, Ethernet, firmware, and regulatory functions are supported. Select another wireless SoC when the design needs a different radio architecture, antenna arrangement, interface set, processor baseline, or vendor software ecosystem. Platform reuse and validated hardware support generally matter more than a generic feature comparison for this highly integrated device.
What is the best drop-in replacement for BCM47452SAF01?
No verified drop-in replacement for the BCM47452SAF01 is identified because the controlled package, pinout, electrical limits, and radio configuration are not published in the available product records. A valid drop-in candidate must use the same package and footprint, maintain pin-to-pin compatibility, preserve required radio and Ethernet functions, and support an acceptable firmware migration path. Treat functionally similar wireless SoCs as redesign candidates rather than drop-in replacements.
Can another Broadcom wireless SoC replace BCM47452SAF01?
Another Broadcom wireless SoC can replace the BCM47452SAF01 only after its package, pinout, power design, radio configuration, memory interface, Ethernet interfaces, boot process, and firmware are verified as compatible. No specific same-package substitute is established by the available cross-reference results. Treat any alternate MPN as a redesign unless the manufacturer confirms that the two devices are footprint-compatible and functionally equivalent.
How should the BCM47452SAF01 PCB be designed?
Design the BCM47452SAF01 PCB using the manufacturer reference layout, including its power network, decoupling placement, RF routing, and controlled-impedance interfaces. Keep RF traces short, preserve the antenna keep-out region, provide solid ground references, and separate Ethernet and digital return paths from sensitive radio circuitry. Because exact pin assignments and package geometry are not established, do not begin layout without the controlled pin table and mechanical drawing.
What power and thermal considerations apply to BCM47452SAF01?
Power and thermal design must be based on the BCM47452SAF01's controlled operating-voltage limits, rail sequencing, current limits, and package thermal data. Those values are not established by the available product information, so a numerical regulator or heat-sink design should not be inferred. Validate each supply rail for startup current, noise sensitivity, sequencing, and tolerance, and estimate junction temperature from the actual dissipation and board conditions.
Is BCM47452SAF01 currently in production?
The current production status of the BCM47452SAF01 cannot be confirmed from the available product listings. Active distributor pages show the MPN, but they do not establish a dated lifecycle declaration in the available information. Request a lifecycle and supply-status confirmation through the Request a Quote form on this page before making an irreversible production commitment, especially for a multi-year embedded networking product.
Where can I buy BCM47452SAF01 and check its lead time?
Use the Request a Quote form on this page to inquire about BCM47452SAF01 availability, lead time, minimum order quantity, and delivery options. The available listings identify the exact MPN and its integrated BCM47452, BCM43525, and BCM54210E architecture, but they do not provide a qualifying quantity-break price table. A formal quotation is the appropriate route for production planning without relying on a stale stock indication.
What are the key specifications of BCM47452SAF01?
The key confirmed specifications of the BCM47452SAF01 are its RF SoC classification, Broadcom manufacturing, and integration of the BCM47452, BCM43525, and BCM54210E components. Product records also identify it as a system-on-chip intended for advanced wireless connectivity. Package, pin count, voltage, frequency, temperature, power, and radio-standard details must be taken from the controlled Broadcom documentation before schematic capture or production release.

Datos de referencia de ingeniería para BCM47452SAF01 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the BCM47452SAF01 when the product can reuse its integrated Broadcom platform comprising the BCM47452, BCM43525, and BCM54210E. It is particularly appropriate for wireless routers, enterprise gateways, connected appliances, network bridges, and industrial gateways that benefit from combining processing, radio connectivity, and Ethernet functions in one SoC. Do not select it based solely on those functional blocks: verify the package, pinout, electrical limits, supported radio standards, antenna configuration, regulatory coverage, firmware baseline, and long-term software support using controlled Broadcom documentation. Treat another wireless SoC as a redesign unless its manufacturer confirms the same package and pin-to-pin compatibility. This distinction is especially important because the available records do not establish the BCM47452SAF01's mechanical footprint or a verified drop-in substitute.

Comparación con alternativas

Parámetro Este producto
Manufacturer Broadcom
Device Type RF system-on-chip
Integrated Processing Block BCM47452
Integrated Radio Block BCM43525
Integrated Ethernet Block BCM54210E
Target Application Advanced wireless connectivity

Notas de diseño

Use the controlled Broadcom reference layout as the authority for placement, fanout, decoupling, and RF routing. Keep the BCM43525 radio path away from switching regulators, high-speed digital return currents, and Ethernet magnetics where practical. Preserve the antenna keep-out region and route RF lines over continuous reference planes. Do not infer pad locations from the integrated block names; the exact package and exposed-pad requirements must be taken from the controlled mechanical drawing.

Treat Ethernet and RF interfaces as separate physical domains even though both functions are integrated into the BCM47452SAF01. Provide continuous ground references, avoid split planes beneath high-speed links, and follow the reference design's controlled-impedance geometry. Place any required PHY support components and isolation structures exactly as shown in the validated design, because hand-routed substitutes can change return-path behavior, radiated emissions, and antenna performance.

Build the power tree from the controlled rail, sequencing, current-limit, and decoupling requirements for the exact BCM47452SAF01 revision. Validate startup current at the supply source, not only at the SoC pin, and reserve local high-frequency bypassing at the specified package pins. If thermal calculations are required, label them as estimates and include the actual input voltage, output voltage, load current, ambient temperature, and package thermal resistance used in the calculation.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Component-level environmental and automotive compliance declarations are not stated in the available product records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status from the controlled manufacturer product documentation before procurement or production release.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

BCM47452SAF01 datasheet BCM47452SAF01 pinout BCM47452SAF01 datasheet pdf BCM47452SAF01 specifications BCM47452SAF01 equivalent BCM47452SAF01 replacement BCM47452SAF01 drop-in alternative Broadcom BCM47452SAF01 BCM47452SAF01 wireless router BCM47452SAF01 RF SoC BCM47452SAF01 footprint BCM47452SAF01 price BCM47452SAF01 stock BCM47452SAF01 lead time what is BCM47452SAF01

Componentes & términos relacionados

Broadcom BCM47452SAF01 BCM47452 BCM43525 BCM54210E RF system-on-chip RF SoC system-on-chip SoC wireless connectivity semiconductor integrated circuit Ethernet interface wireless radio Wi-Fi router enterprise wireless gateway connected appliance industrial wireless gateway embedded networking controller controlled-impedance routing RF routing reference design thermal management firmware support
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ