BCM5697B0KPB - 12-Port Gigabit Ethernet Stackable Switch | Broadcom
N.º de pieza: BCM5697B0KPB ✓ ActivoBCM5697B0KPB Descripción general
An Ethernet switch is a network-semiconductor device that receives Ethernet frames on one port, examines their destination and control information, and forwards them through one or more appropriate output ports. The BCM5697 belongs to the Layer 2+ switching hierarchy: Layer 2 means that forwarding is primarily frame based, while Layer 2+ adds advanced traffic-control capabilities. The BCM5697 specifically supports head-of-line blocking prevention and other packet-flow-control functions, positioning it between basic unmanaged switching and higher-level routing platforms.
The BCM5697 supports 12 Gigabit Ethernet ports and scalable Layer 2 switching. Its wirespeed design is intended to avoid creating bottlenecks when multiple ports operate simultaneously. The HiGig+ backplane or stacking architecture supplies high aggregate bandwidth between switching elements, allowing multiple devices to be combined into a larger Layer 2 system. Very low switching latency makes the platform particularly relevant to voice, video, and data traffic where delay variation can affect service quality.
The device combines packet buffering, switching fabric behavior, flow control, and stacking support within one highly integrated network processor. Head-of-line blocking prevention improves behavior when multiple packets contend for the same output queue, helping maintain utilization under congested conditions. The 480-pin BGA package exposes the required high-speed interfaces and power connections, but its fine pitch and large pin count make careful PCB layout, multilayer routing, thermal analysis, and assembly process control essential.
Typical uses include enterprise Ethernet switches, top-of-rack access equipment, carrier aggregation systems, industrial Ethernet infrastructure, and network appliances that require stackable Gigabit Ethernet. In these systems, the BCM5697 can provide the switching foundation while external processors or PHYs handle control-plane functions, physical-layer signaling, or higher-layer services. Its stackable architecture allows designers to scale port count without changing the fundamental Layer 2 forwarding model.
A successful design must treat power delivery, clocking, thermal management, signal integrity, and high-speed layer-2 traffic as system-level concerns. Place power and ground connections according to the manufacturer’s package and reference-layout guidance, keep sensitive clock and interface routes short, and verify layer transitions for every supported speed. Validate the complete design with the intended PHYs, magnetics, firmware configuration, thermal environment, and stacking topology rather than assuming identical behavior across network implementations.
This product summary combines the Broadcom BCM5697 product brief with component-level information from manufacturer and distribution records, then adds package-focused engineering guidance, sourcing questions, and selection trade-offs. It is intended to help engineers identify the correct device and evaluate whether its 12-port Gigabit Ethernet, HiGig+ stacking, and Layer 2+ feature set fits a new network-equipment design.
Alternativas directas para BCM5697B0KPB — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasBCM5697B0KPB Valores máximos y características eléctricas
| Device Type | 12-port stackable Layer 2+ Gigabit Ethernet switch |
| Number of Gigabit Ethernet Ports | 12 ports |
| Port Data Rate | 1 Gbps per port |
| Switching Performance | Wirespeed across all ports simultaneously |
| HiGig+ Interface Effective Bandwidth | 24 Gbps per interface, equivalent to 12 Gbps full-duplex |
| Switching Layer | Layer 2+ |
| Packet Flow Control | Head-of-line blocking prevention |
| Packet Types | Voice, video, and data traffic |
| Encapsulado | 480-pin BGA |
| Tipo de montaje | Surface mount |
| Manufacturer Pack Quantity | 21 units |
| Moisture Sensitivity Level | MSL 1 (unlimited floor life) |
| Estado del ciclo de vida | Active |
| Manufacturer | Broadcom Limited |
Guía de configuración de pines de BCM5697B0KPB 480-pin bga
Configuración de pines para BCM5697B0KPB (encapsulado 480-pin bga). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para BCM5697B0KPB.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
BCM5697B0KPB es adecuado para 6 aplicacións: Enterprise Access Switching, Top-of-Rack Ethernet Equipment, Carrier Ethernet Aggregation, Industrial Ethernet Infrastructure, Network Appliance Interfaces, Stackable Enterprise Network Expansion.
Enterprise Access Switching
The BCM5697B0KPB fits enterprise access-switch designs requiring 12 Gigabit Ethernet ports per switching element. Its wirespeed simultaneous switching prevents an individual port from operating at only a fraction of line rate while other ports are active, while the HiGig+ interface provides a high-bandwidth path for stacking multiple chassis or line cards. Head-of-line blocking prevention is valuable when access traffic creates output-queue contention. A practical platform would pair the switching IC with compatible Ethernet PHYs, magnetics, a management processor, clocks, and firmware configured for enterprise VLAN and traffic-management features.
Recomendado
Top-of-Rack Ethernet Equipment
The BCM5697B0KPB is appropriate for top-of-rack switching equipment where twelve 1 Gbps access ports must coexist with high-speed internal traffic. Each HiGig+ interface has an effective bandwidth of 24 Gbps, or 12 Gbps full duplex, allowing the switch fabric to carry aggregation traffic without relying on a narrow backplane path. The device’s low switching latency also supports deterministic handling of latency-sensitive services. System designers should validate PHY line rates, packet-buffer behavior, thermal performance of the 480-pin BGA, and management firmware against the intended traffic profile.
Recomendado
Carrier Ethernet Aggregation
The BCM5697B0KPB can serve in carrier Ethernet access and aggregation equipment that requires stackable Gigabit Ethernet and advanced flow control. Twelve front-panel Gigabit Ethernet ports provide service-density, while HiGig+ links enable scalable switching across distributed switching elements. Head-of-line blocking prevention helps maintain throughput when traffic converges on shared uplinks, and low switching latency supports voice, video, and data services. Production designs must confirm the precise Layer 2 service features, environmental requirements, clock architecture, and software-control model required by the carrier network.
Recomendado
Industrial Ethernet Infrastructure
The BCM5697B0KPB can be integrated into industrial Ethernet switches and infrastructure gateways that require many 1 Gbps ports and resilient interconnect bandwidth. Simultaneous wirespeed switching supports aggregation of machine, sensor, control, and office traffic, while HiGig+ links permit equipment expansion through stacking. The broad packet types supported by the BCM5697 architecture include voice, video, and data, which makes it relevant to converged industrial networks. Before release, evaluate operating-temperature limits, isolation requirements, electromagnetic compatibility, power-loss recovery, and the behavior of the selected PHY and magnetics solutions.
Recomendado
Network Appliance Interfaces
The BCM5697B0KPB is suitable for network appliances needing a dense Gigabit Ethernet switching front end without using many discrete switching components. Twelve ports, low switching latency, and stackable HiGig+ connectivity can support gateways, aggregation controllers, and specialized communication equipment. The high-bandwidth internal links allow packet-processing hardware to exchange traffic with multiple external network ports efficiently. Integration still requires appropriate PHYs, magnetics, clocks, firmware, packet-buffer policy, and thermal management. The 480-pin BGA also demands a manufacturing process capable of handling its fine-pitch land pattern and demanding power-delivery network.
Recomendado
Stackable Enterprise Network Expansion
The BCM5697B0KPB supports network expansion by adding multiple 12-port switching elements through HiGig+ interconnects. Each interface provides an effective 24 Gbps of bandwidth, equivalent to 12 Gbps full duplex, allowing internal traffic to scale as the stack grows. This architecture can create dense Gigabit Ethernet access without forcing all line cards to share one narrow uplink. Designers should verify stacking topology, cable or backplane implementation, control-plane software, fail-over behavior, and firmware compatibility. Low switching latency and head-of-line blocking prevention remain important when voice, video, and data traffic share the same stack.
Recomendado
Datos de referencia de ingeniería para BCM5697B0KPB — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | Broadcom |
| Package | 480-pin BGA |
| Device Type | Stackable Layer 2+ Gigabit Ethernet switch |
| Gigabit Ethernet Ports | 12 ports |
| Port Rate | 1 Gbps per port |
| HiGig+ Effective Bandwidth | 24 Gbps per interface, equivalent to 12 Gbps full duplex |
| Switching Performance | Wirespeed across all ports simultaneously |
| Packet Flow Control | Head-of-line blocking prevention |
| Lifecycle Status | Active |
| Manufacturer Pack Quantity | 21 units |
Diferenciadores clave
- Twelve integrated Gigabit Ethernet ports (frente a No verified drop-in alternatives were identified)
- High-bandwidth stackable interconnect (frente a Basic unmanaged Gigabit Ethernet switches)
- Advanced congestion handling (frente a Basic fixed-forwarding Gigabit Ethernet switches)
Notas de diseño
Implement the 480-pin BGA footprint directly from the BCM5697 manufacturer package drawing rather than from a generic Ethernet-switch library. Assign every power, ground, clock, HiGig+, and external interface ball according to the pin-description table, then design separate distribution paths for core and I/O supplies. Use a multilayer PCB with uninterrupted return planes and via stitching to control impedance and provide both high-frequency and low-frequency return paths.
Treat switch-IC thermal design as a board-level problem. Before power-supply selection, determine the BCM5697’s maximum operating current for the enabled interfaces, processor activity, and temperature grade from the complete manufacturer documentation. Calculate junction rise from total dissipated power and the package-to-ambient thermal path, including PCB copper and enclosure airflow. Avoid using nominal traffic assumptions if the deployed design can activate all 12 ports and both stacking directions simultaneously.
Validate HiGig+ and external interface routing with the complete PHY, clock, connector, and magnetics configuration. Maintain the manufacturer’s reference geometry for high-speed lanes, provide continuous reference planes, minimize stubs, and use appropriate via transitions for layer changes. Check insertion loss, crosstalk, skew, and return loss across the intended voltage and temperature ranges rather than relying only on rule-based length matching.
Do not treat the 24 Gbps HiGig+ figure as a 24 Gbps one-direction payload rate; the Broadcom product brief defines it as an effective 24 Gbps interface, equivalent to 12 Gbps full duplex. Also do not assume that a related Broadcom ordering code is pin-compatible. Verify the exact BGA ball map, supply rails, clock sources, reset behavior, PHY integration boundary, firmware support, and thermal requirements before approving any alternate part or second-source package.
Información de cumplimiento
The available product records identify the BCM5697B0KPB as active and specify MSL 1, but they do not provide conclusive environmental or material-compliance statements.