Broadcom

BCM8125BKFBG - 10 Gbps 1:16 Demultiplexer | Broadcom

N.º de pieza: BCM8125BKFBG ✗ Fin de vida
Integrated CDR Speed
MOQ: 1 |

BCM8125BKFBG Descripción general

Broadcom BCM8125BKFBG is a 10 Gbps 1:16 demultiplexer with CDR and limiting amplifier functionality, supplied in the BKFBG package designation. The component is positioned for high-speed optical and network interface systems where one incoming data stream must be distributed across multiple lower-rate lanes. Its defining verified characteristics are the 10 Gbps input data rate, 1:16 demultiplexing ratio, integrated CDR, and integrated limiting amplifier. The available product records identify BCM8125BKFBG as an Interface ICs device from Broadcom and classify it as a multi-rate 10-Gbps 1:16 demux with CDR and limiting amplifier.

An optical demultiplexer is an interface function that separates a high-speed serial data stream into multiple parallel or lower-speed channels. In the broader electronics hierarchy, this BCM8125 device belongs to communication and networking interface integrated circuits, alongside drivers, receivers, and transceivers. The integrated CDR helps recover a usable data stream from a transmitted signal, while the limiting amplifier provides signal conditioning before downstream processing. These functions are commonly relevant to optical modules, backplane links, test equipment, and data-communication infrastructure.

The verified product identity emphasizes a 10-Gbps 1:16 demultiplexing architecture with integrated CDR and limiting amplifier. This combination can reduce the number of separate external signal-conditioning blocks in a multi-lane interface design. The 1:16 ratio is particularly useful when a central high-speed link must feed sixteen parallel channels. Because signal integrity, channel-to-channel skew, power consumption, and thermal behavior are critical in this class of IC, board implementation should follow the manufacturer’s recommended application circuit, package land pattern, and decoupling guidance.

BCM8125BKFBG is associated with Broadcom communication and networking silicon, and the available listings identify the exact full MPN rather than only the BCM8125 family. The BKFBG suffix is part of the ordering designation used by the listed Broadcom component, so it should be retained when comparing inventory, package data, and schematic references. Product descriptions also identify the device as a fully integrated single-chip Ethernet interface in one distributor listing, while other listings describe the same 10-Gbps demultiplexing and CDR function.

Typical applications include 10-Gbps Ethernet and other high-speed optical-interface systems, parallel optical demultiplexing, telecommunications backplanes, network monitoring equipment, and high-speed test systems. In an optical-module design, the device can be evaluated as the central demultiplexing and signal-conditioning element when the system requires CDR recovery and limiting amplification ahead of lower-rate processing. A complete design must still account for the input line rate, allowed data-rate range, electrical characteristics, pin connectivity, termination, power-supply sequencing, and channel-performance requirements.

A key implementation concern is that a 10-Gbps interface is highly sensitive to routing and return-path discontinuities. Place power and decoupling networks according to the manufacturer layout guidance, keep high-speed differential traces controlled, and verify the complete channel with realistic loss, jitter, and crosstalk. The exact BCM8125BKFBG pin list, absolute maximum ratings, recommended operating conditions, package dimensions, and lifecycle classification should be confirmed in the Broadcom datasheet and product documentation before schematic release.

This page consolidates the verified Broadcom identity, functional description, package ordering code, sourcing records, and engineering guidance for BCM8125BKFBG. It also distinguishes the exact full MPN from broader BCM8125-family references and identifies the application-level design checks that are not visible in a basic distributor listing.

Alternativas directas para BCM8125BKFBG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

BCM8125BKFBG Valores máximos y características eléctricas

Manufacturer Broadcom
MPN BCM8125BKFBG
Product Type 10-Gbps 1:16 demultiplexer with CDR and limiting amplifier
Input Data Rate 10 Gbps
Demultiplexing Ratio 1:16
Data-Rate Support Multi-rate
Clock and Data Recovery Integrated CDR
Signal Conditioning Integrated limiting amplifier
Integration Single-chip integrated solution
Device Classification Drivers, receivers, and transceivers
Application Domain Communication and networking
Ordering Suffix BKFBG

Guía de configuración de pines de BCM8125BKFBG standard

Configuración de pines para BCM8125BKFBG (encapsulado standard). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado standard para BCM8125BKFBG

No hay datos detallados de patillaje disponibles para BCM8125BKFBG.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

BCM8125BKFBG es adecuado para 6 aplicacións: 10-Gbps Ethernet Interface, Optical Module Signal Conditioning, Telecommunications Backplane Interface, Network Monitoring Equipment, High-Speed Test and Measurement, Parallel Data Aggregation.

🌐

10-Gbps Ethernet Interface

BCM8125BKFBG fits a high-speed network interface that must convert one 10-Gbps serial stream into sixteen parallel or lower-rate channels. The integrated CDR and limiting amplifier place clock recovery and signal conditioning alongside the 1:16 demultiplex function. This can simplify signal-chain partitioning in optical, copper, or backplane-facing interface designs. Validation must account for channel loss, jitter tolerance, impedance continuity, and the exact electrical requirements of the connected processors or FPGAs.

💡

Optical Module Signal Conditioning

In an optical-module receiver, BCM8125BKFBG can be evaluated where a 10-Gbps incoming signal requires demultiplexing plus clock and data recovery before lower-rate processing. Its integrated limiting amplifier supports signal conditioning within the same interface device. The implementation should preserve controlled-impedance routing, continuous reference planes, and low-inductance power return paths. Optical-module design teams should also confirm channel budget, BER target, and supported operating conditions against the Broadcom documentation.

🌐

Telecommunications Backplane Interface

A telecommunications backplane interface that concentrates traffic onto one 10-Gbps path can use the BCM8125BKFBG 1:16 architecture to distribute that path into sixteen channels. Integrating CDR and limiting amplification can reduce the number of discrete interface blocks needed around the demultiplexer. Because backplanes introduce insertion loss, reflections, skew, and connector transitions, the design should include channel simulation and board-level eye measurements rather than relying only on schematic-level timing checks.

🖥️

Network Monitoring Equipment

Network monitoring and test systems benefit from a compact way to fan one 10-Gbps stream into sixteen observation channels. BCM8125BKFBG provides the 1:16 demultiplexing function with CDR and limiting amplifier integration, allowing each downstream analyzer or processor lane to receive a divided data path. Engineers should budget board area, power delivery, thermal margins, and channel-to-channel timing carefully, and should verify synchronization behavior for any measurements that depend on coherent observation across all sixteen outputs.

🔧

High-Speed Test and Measurement

BCM8125BKFBG can support instrumentation that receives a 10-Gbps stream and requires it distributed across sixteen lower-rate lanes for analysis or triggering. The integrated CDR helps establish recovered data timing, while the limiting amplifier conditions the incoming signal before demultiplexing. Instrumentation designs should include controllable termination, low-noise power distribution, and carefully modeled test fixtures. Calibration and measurement accuracy also depend on ensuring that fixture loss and jitter remain inside the complete channel budget.

🖥️

Parallel Data Aggregation

The 1:16 demultiplexing ratio of BCM8125BKFBG suits parallel aggregation systems in which a central 10-Gbps lane supplies sixteen lower-rate destinations. Its CDR and limiting-amplifier functions support recovery and conditioning within a single Broadcom interface IC. For FPGA- or processor-based endpoints, designers should map the recovered output timing, verify lane polarity and format, and include margin for skew. Power and thermal checks are particularly important because the package must dissipate heat while operating continuously at the verified line rate.

What is BCM8125BKFBG?
BCM8125BKFBG is a Broadcom 10-Gbps 1:16 demultiplexer with integrated clock and data recovery and a limiting amplifier. It is classified as an interface IC for communication and networking equipment. According to the Broadcom BCM8125 datasheet listing, its core function is to separate one high-speed input into sixteen outputs while supporting the associated signal-recovery and limiting functions.
What are the key specifications of BCM8125BKFBG that engineers should know?
The principal verified specifications of BCM8125BKFBG are a 10-Gbps input rate, a 1:16 demultiplexing ratio, multi-rate operation, integrated CDR, and an integrated limiting amplifier. Broadcom product descriptions also classify it as a single-chip interface solution. Detailed voltage, package dimensions, channel timing, and operating-temperature limits must be taken from the manufacturer datasheet rather than inferred from these top-level identifiers.
Where can I download the BCM8125BKFBG datasheet?
The BCM8125 datasheet PDF can be opened through the Broadcom document link listed on the AllDataSheet record for the BCM8125 family. The BCM8125BKFBG ordering code should be checked against the family document before release because package suffix codes can distinguish mechanical, temperature, or qualification options. This page provides the direct manufacturer-family document location rather than a reconstructed secondary file.
Where can I find the BCM8125BKFBG pinout?
Use the pin-description table and package drawing in the Broadcom BCM8125 datasheet to locate the BCM8125BKFBG pinout. The verified product records confirm the BKFBG ordering designation but do not reproduce pin numbers or signal names, so the complete pin list is not repeated here. Verify the exact ordering code against the package and pin-description tables before assigning PCB tracks.
Is BCM8125BKFBG suitable for high-speed optical interfaces?
BCM8125BKFBG is suitable for evaluating high-speed optical-interface signal paths that require 10-Gbps demultiplexing, CDR, and limiting amplification. Its 1:16 ratio suits systems in which a central high-speed stream must feed sixteen channels. The final suitability depends on the optical-module architecture, channel loss, jitter budget, electrical interfaces, and operating constraints defined in the manufacturer datasheet.
What is the difference between BCM8125 and BCM8125BKFBG?
BCM8125 identifies the Broadcom device family, while BCM8125BKFBG is the complete ordering code for a particular package and qualification configuration. The verified listings describe BCM8125BKFBG as the 10-Gbps 1:16 demux with CDR and limiting amplifier. Do not substitute the shorter family name in a production BOM when the exact suffix, package, and qualification conditions must be preserved.
When should I choose BCM8125BKFBG instead of a generic demultiplexer?
Choose BCM8125BKFBG when the design specifically calls for a 10-Gbps 1:16 demultiplexing function with integrated CDR and limiting amplification. Its single-chip integration can simplify signal-chain partitioning compared with a design using separate recovery and limiting stages. A generic demultiplexer may be preferable only when its supported rates, recovery architecture, electrical characteristics, and channel count are better matched to the system.
What can replace BCM8125BKFBG?
No verified pin-to-pin replacement for BCM8125BKFBG is identified in the available cross-reference records. A valid drop-in substitute would need the same package, exact pin connectivity, compatible 10-Gbps operation, equivalent 1:16 demultiplexing, and functionally equivalent CDR and limiting-amplifier behavior. The Request a Quote form on this page should be used to ask about replacement sourcing and engineering review.
Is BCM8125BKFBG the same as BCM8125?
BCM8125BKFBG is the full Broadcom ordering designation within the BCM8125 family, not merely an interchangeable generic name. The exact suffix identifies the configured package orderable by this MPN. Confirm the datasheet ordering table before treating any BCM8125-family variant as equivalent because package dimensions, temperature range, or qualification requirements may differ.
Where can I buy BCM8125BKFBG online?
BCM8125BKFBG can be requested through the Request a Quote form on this page using the exact MPN and BKFBG ordering suffix. The form should include target quantity, acceptable date code condition, and destination country or region. Current commercial terms should be confirmed through the quote workflow because inventory and order acceptance can change independently of the device specification.
What is the price of BCM8125BKFBG?
A current unit price is not stated as a fixed figure on this page. Use the Request a Quote form with the exact MPN BCM8125BKFBG to obtain current commercial terms for the required quantity and condition. This avoids quoting an outdated or ambiguous price that may correspond to a different BCM8125 package suffix or family-level listing.
What is the lead time for BCM8125BKFBG?
The current lead time for BCM8125BKFBG should be confirmed through the Request a Quote form on this page. Include the required quantity, target date, and acceptable date-code or condition requirements in the request. The manufacturer documentation establishes the device function, while supply allocation and delivery scheduling are commercial matters that require a current quote.
Is BCM8125BKFBG in stock?
Current stock status for BCM8125BKFBG is not asserted as a fixed condition on this page. Submit the exact MPN through the Request a Quote form and request confirmation of availability, allocation, and expected shipment timing. Because BCM8125BKFBG includes a specific package suffix, include that suffix in every inquiry to prevent a family-level inventory match from being mistaken for the exact device.
What design considerations matter for a BCM8125BKFBG 10-Gbps link?
A BCM8125BKFBG design must treat the 10-Gbps path as a controlled-impedance, high-speed interface rather than a conventional digital bus. Follow the manufacturer’s recommended PCB stack-up, differential-routing geometry, return-path continuity, decoupling, and package-land-pattern instructions. Validate attenuation, jitter, impedance, and crosstalk at the assembled-board level because correct schematic connectivity alone cannot guarantee channel performance.
Is BCM8125BKFBG compliant with RoHS and REACH?
The RoHS and REACH status of BCM8125BKFBG must be confirmed from the current Broadcom product declaration or material-compliance documentation. The verified product records establish the manufacturer, MPN, and interface function but do not explicitly state either compliance result. Request the applicable declaration before treating the device as compliant for a regulated production release.

Datos de referencia de ingeniería para BCM8125BKFBG — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose BCM8125BKFBG when the interface architecture requires a 10-Gbps 1:16 demultiplexer with integrated CDR and limiting amplification. Its single-chip integration is useful when the design must divide one high-speed stream into sixteen channels while limiting the number of separate recovery and conditioning blocks. The exact BCM8125BKFBG ordering code should be retained when package, temperature, or qualification requirements matter. Do not select this device solely from the BCM8125 family name; compare the complete suffix and pin/package information. A generic demultiplexer may offer a better fit when its native rate, channel count, clock-recovery method, supply architecture, or package differs from the BCM8125 design. Likewise, a separate CDR or limiting-amplifier implementation may be preferable when the system needs independent control, different channel timing, or a different regulatory or temperature profile. No verified drop-in substitute is identified, so any proposed replacement should undergo pin, package, signal-integrity, power, thermal, and system-level validation before production use.

Notas de diseño

Treat the 10-Gbps path as a controlled-impedance differential interface. Use the manufacturer’s recommended layer stack, line geometry, pair spacing, and reference-plane continuity, and avoid plane splits or unreferenced branch stubs beneath high-speed pairs. Verify the PCB fabrication stack-up against the actual impedance target rather than relying on a nominal schematic connection.

Decouple the supply rails close to the package with the capacitance and placement prescribed by the manufacturer. Keep high-current return paths short and provide a low-impedance path from each decoupling capacitor to the relevant power and ground pins. Account for simultaneous switching demand and power-supply transient response when selecting the regulator and bulk capacitance.

Validate the complete link with insertion loss, return loss, jitter, crosstalk, and package-transition models. The 1:16 demultiplex architecture must be evaluated for output-to-output skew as well as recovered-data timing. Use eye measurements on representative boards because package, connector, and PCB parasitics can materially alter a nominal 10-Gbps design margin.

Do not treat BCM8125, BCM8125BKFBG, and other family suffixes as automatically equivalent. Confirm the ordering table, package drawing, temperature range, and qualification requirements against the exact suffix. Also avoid using a generic interface IC as a drop-in replacement unless its package, pinout, clock-recovery behavior, demultiplex ratio, and electrical limits have all been confirmed.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The available product records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for BCM8125BKFBG. Confirm current declarations with Broadcom before production release.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

BCM8125BKFBG datasheet BCM8125BKFBG pinout BCM8125BKFBG datasheet pdf BCM8125BKFBG equivalent BCM8125BKFBG replacement BCM8125BKFBG cross reference BCM8125BKFBG 10 Gbps demultiplexer BCM8125BKFBG 1:16 CDR Broadcom BCM8125BKFBG BCM8125BKFBG optical interface BCM8125BKFBG price BCM8125BKFBG stock BCM8125BKFBG footprint BCM8125BKFBG application circuit

Componentes & términos relacionados

Broadcom BCM8125BKFBG BCM8125 BKFBG 10-Gbps demultiplexer 1:16 demultiplexer clock and data recovery CDR limiting amplifier Interface IC communication and networking IC drivers, receivers, and transceivers optical interface telecommunications backplane network monitoring high-speed test equipment parallel data aggregation single-chip interface solution multi-rate operation differential signal integrity channel skew surface mount Ethernet semiconductor
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ