BM71BLES1FC2-0B02AA - BLE 5.0 Module 9x11.5mm | Microchip
N.º de pieza: BM71BLES1FC2-0B02AA ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $12.75 | $12,75 |
| 10 | $11.48 | $114,80 |
| 100 | $10.33 | $1.033,00 |
| 500 | $9.3 | $4.650,00 |
| 1.000 | $8.37 | $8.370,00 |
BM71BLES1FC2-0B02AA Descripción general
A Bluetooth Low Energy module is a complete wireless subsystem that integrates a BLE radio, baseband, protocol stack, and antenna into a single certified unit. In the system hierarchy it sits above discrete RF ICs (which require external stack development and RF design) and below complete host systems, functioning as a serial-to-BLE bridge that frees the host MCU from managing the Bluetooth software stack, timing-critical RF firmware, and regulatory certification.
Key features of the BM71BLES1FC2-0B02AA include Bluetooth Core 5.0 compliance with up to 2.5x throughput improvement over earlier BM70-generation silicon, a completely integrated Bluetooth software stack with configuration via simple ASCII commands over UART, a shielded enclosure for EMI reduction, and an integrated chip antenna on a regulatory-certified variant. Supply voltage spans 1.9 V to 3.6 V, suiting single-cell lithium and 3.3 V logic designs, and the module is rated for industrial temperature environments.
Architecturally, the BM71 embeds Microchip's BLE silicon with flash memory for stack and application script storage. The certified, shielded, antenna-integrated construction means the RF matching network, crystal, and antenna have been tuned by Microchip, removing the most error-prone portion of a wireless design. Developers interact with the module as a wireline replacement: UART data in, BLE data out.
Typical applications include smart-home sensors and actuators, battery-powered IoT beacons, industrial wireless configuration and diagnostic links, and connected health accessories. The industrial temperature rating and shielded package also suit networked lighting controls and commercial building automation.
A key design consideration is layout: although the antenna is integrated, keep at least the datasheet-recommended keep-out area free of copper and plastics above the antenna region to preserve the certified radiation pattern and sensitivity.
This page synthesizes distributor pricing (as of 2026-10-19), drop-in family alternatives, design notes, and long-tail selection guidance not found in the manufacturer datasheet.
Alternativas directas para BM71BLES1FC2-0B02AA — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con BM71BLES1FC2-0B02AA (mismo factor de forma y huella) — difiere en Bluetooth Version, Frequency Band, Host Interface, Mounting Type, Operating Temperature.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
BM71BLES1FC2-0B04AA
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
BM71BLES1FC1-0B02AA
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
BM70BLES1FC2-0B02AA
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
BM71BLES1FC2-0B02AA Especificaciones (publicadas por el fabricante)
| Bluetooth Version | Bluetooth 5.0 Low Energy (BLE) |
| Frequency Band | 2.4 GHz (2.402 GHz to 2.480 GHz) |
| Receiver Sensitivity | -90 dBm |
| Supply Voltage Range | 1.9 V to 3.6 V |
| Antenna Type | Integrated chip antenna |
| Shielding | Shielded module |
| Dimensions | 9 x 11.5 x 2.1 mm |
| Temperatura de funcionamiento | Industrial grade |
| Tipo de montaje | Surface Mount (SMD) |
| Regulatory Certification | Certified module variant |
| Software Stack | Fully integrated Bluetooth stack |
| Host Interface | UART (ASCII command / transparent data mode) |
| Packaging | Tray |
| Estado RoHS | Compliant |
| Product Family | BM71 |
Interfaces y conectores de BM71BLES1FC2-0B02AA
BM71BLES1FC2-0B02AA expone las siguientes interfaces y conectores según lo publicado por el fabricante: Bluetooth, Entrada de potencia. El patillaje de la cabecera de expansión, la numeración de pines de los conectores y los límites eléctricos se definen en la documentación del fabricante.
| Bluetooth | Bluetooth 5.0 Low Energy (BLE) |
| Entrada de potencia | 1.9 V to 3.6 V |
Consulte la documentación del fabricante para ver el patillaje completo del conector de expansión y la numeración de pines del conector.
Características de potencia y térmicas
| Entrada de potencia | 1.9 V to 3.6 V |
| Temperatura de funcionamiento | Industrial grade |
Parámetros de entrada de potencia y térmicos para BM71BLES1FC2-0B02AA según lo publicado por el fabricante.
Aplicaciones típicas
BM71BLES1FC2-0B02AA es adecuado para 6 aplicacións: Smart Home Sensors and Actuators, Industrial Wireless Configuration and Diagnostics, Battery-Powered IoT Beacons, Connected Health and Wellness Accessories, Networked Lighting Control, Point-of-Sale and Payment Accessories.
Smart Home Sensors and Actuators
The BM71BLES1FC2-0B02AA fits smart-home nodes such as door/window sensors, smart plugs, and lighting controls because its 1.9 V to 3.6 V supply accepts a single lithium cell across its full discharge curve, and its fully integrated Bluetooth 5.0 stack removes stack maintenance from the host MCU. Used as a UART-to-BLE bridge, the module transmits sensor telemetry in transparent data mode while sleeping between connection events to conserve battery. The integrated chip antenna and shielded 9 x 11.5 x 2.1 mm package preserve sensitivity (-90 dBm) inside plastic enclosures without RF layout effort, and pre-certification shortens time to market for consumer products where regulatory testing is a critical-path item.
Recomendado
Industrial Wireless Configuration and Diagnostics
In industrial equipment, the BM71BLES1FC2-0B02AA provides a cable-free configuration and diagnostic port: a technician with a phone connects over BLE 5.0 and reads or writes parameters through the module's ASCII command interface, replacing physical service connectors. The industrial temperature rating and shielded package suit factory-floor environments with electrical noise, where the shielding protects the 2.4 GHz receiver from nearby switching converters and motor drives. Bluetooth 5.0's up to 2.5x throughput improvement over the prior generation shortens log and firmware transfers. Because the module is pre-certified with an integrated antenna, equipment makers avoid adding regional RF certifications for what is only a service interface.
Recomendado
Battery-Powered IoT Beacons
For BLE beacon deployments (asset tracking tags, proximity beacons, retail sensors), the BM71BLES1FC2-0B02AA offers long field life: the wide 1.9 V to 3.6 V input tolerates lithium coin-cell voltage sag, and the integrated stack advertises autonomously so the host MCU can remain powered down. The certified integrated antenna delivers repeatable range without per-unit RF tuning, and the -90 dBm sensitivity extends receive margin in dense RF environments. At high volumes the tray packaging supports automated pick-and-place assembly. Pre-certification per radio batch eliminates regulatory retesting when only the enclosure changes between product variants, which is common across beacon SKU families.
Recomendado
Connected Health and Wellness Accessories
Wearable and connected-health products (thermometers, pulse oximeters, activity monitors) benefit from the BM71BLES1FC2-0B02AA's compact 9 x 11.5 x 2.1 mm shielded footprint, which fits wrist-worn and handheld enclosures, and its 1.9 V minimum supply that extracts full capacity from single-cell batteries. BLE 5.0's improved throughput streams continuous measurement data to mobile apps with shorter radio-on intervals, conserving battery. The integrated Bluetooth stack supports secure pairing for patient-data privacy, and Microchip's pre-certified antenna solution keeps medical-product certification focused on the sensor electronics rather than the radio. UART transparent mode lets the host MCU concentrate exclusively on measurement algorithms.
Recomendado
Networked Lighting Control
Commercial LED lighting systems use BLE mesh-style control networks for dimming, color tuning, and occupancy response. The BM71BLES1FC2-0B02AA supplies the 2.4 GHz radio link with an industrial temperature rating appropriate to luminaire driver enclosures, and its shielded package coexists with switching LED drivers whose EMI would otherwise desensitize an unshielded radio. The 1.9 V to 3.6 V range supports standard 3.3 V control rails derived from mains supplies, and the integrated certified antenna simplifies luminaire certification. Bluetooth 5.0's higher throughput accommodates future firmware updates and scene-command bursts beyond simple on/off control, and UART command mode integrates cleanly with lighting MCUs.
Recomendado
Point-of-Sale and Payment Accessories
Mobile POS peripherals such as card-reader dongles, receipt printers, and barcode scanners use the BM71BLES1FC2-0B02AA as a secure wireless data pipe to tablets and phones. BLE 5.0 throughput (up to 2.5x the prior BM70 generation per Microchip) shortens receipt and transaction-record transfers, and the integrated stack's security features support encrypted pairing required in payment workflows. The shielded 9 x 11.5 mm module resists interference from printer motors and charge pumps inside compact accessories, while the certified integrated antenna avoids per-product RF approvals. The 1.9 V to 3.6 V supply suits 3.3 V logic powered from a single-cell rechargeable pack.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para BM71BLES1FC2-0B02AA — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | BM71BLES1FC2-0B04AA | BM71BLES1FC1-0B02AA | BM70BLES1FC2-0B02AA |
|---|---|---|---|---|
| Package | 9 x 11.5 x 2.1 mm shielded module, integrated antenna | 9 x 11.5 x 2.1 mm shielded module, integrated antenna - same | 9 x 11.5 x 2.1 mm shielded module, integrated antenna - same | 9 x 11.5 x 2.1 mm module, integrated antenna - same footprint |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Bluetooth Version | Bluetooth 5.0 BLE | Bluetooth 5.0 BLE | Bluetooth 5.0 BLE | Bluetooth 4.2-class BLE |
| Supply Voltage | 1.9 V to 3.6 V | 1.9 V to 3.6 V | 1.9 V to 3.6 V | 1.9 V to 3.6 V |
| Relative Throughput | Baseline (BM71, up to 2.5x prior gen per Microchip) | Same as this product | Same BM71 silicon | Up to 2.5x lower than BM71 |
| Antenna | Integrated chip antenna | Integrated chip antenna | Integrated chip antenna | Integrated chip antenna |
Diferenciadores clave
- Bluetooth 5.0 with up to 2.5x throughput improvement (frente a BM70BLES1FC2-0B02AA)
- Fully certified shielded variant with integrated antenna (frente a BM71BLES1FC2-0B04AA)
- Complete integrated stack frees the host MCU (frente a nRF52832 (SoC alternative))
Notas de diseño
Even though the chip antenna is integrated and factory-tuned, the PCB must respect the Microchip-recommended antenna keep-out: no copper pours, traces, battery cells, or plastic bosses above or beside the antenna end of the 9 x 11.5 mm module. Placing ground planes or metal enclosures within the keep-out detunes the antenna, reduces the -90 dBm sensitivity margin, and invalidates the modular certification grant. Copy the recommended land pattern and keep-out directly from the Microchip BM71 hardware design checklist rather than re-deriving it.
Power the module from a clean 3.3 V rail within the 1.9 V to 3.6 V range. BLE radios draw pulsed transmit current bursts; a local 10 uF ceramic bulk capacitor plus 0.1 uF high-frequency bypass at the supply pin prevents rail droop during TX bursts that can reset the module or corrupt the UART link. If powered from a lithium coin cell, verify the cell's pulse current capability - radio TX bursts plus host MCU load must stay within the cell's rated pulse current to avoid brown-out resets during advertising.
The 0B02AA suffix encodes firmware configuration and certification region - do not substitute another suffix (e.g., 0B04AA) on a production BOM without confirming equivalent regional grants and firmware behavior in the Microchip BM71 ordering documentation; UART baud rate and advertising configuration can differ between suffixes. Also, the module is certified as shipped: modifying firmware outside Microchip's approved configuration space or altering the antenna environment requires re-certification. Pin the exact suffix in your ERP to prevent purchasing substitutions.
Información de cumplimiento
RoHS compliance per standard Microchip module product listings; the module variant itself is RF regulatory certified (shielded, integrated antenna per Mouser/FindIC listings). REACH and halogen-free status not stated in provided data.
