Silicon Labs

C8051F410-GQ - 50MHz 32KB 8-Bit MCU | Silicon Labs

N.º de pieza: C8051F410-GQ ✓ Activo
Integrated Vdss 32-LQFP, 7 x 7 mm Package 50 MHz Speed 32 KB Memory
MOQ: 1 |

C8051F410-GQ Descripción general

The Silicon Labs C8051F410-GQ is an 8-bit C8051F41x mixed-signal microcontroller operating up to 50 MHz, with 32 KB of embedded flash memory organized as 32K x 8 bits, in a 32-LQFP 7 x 7 mm package. It combines the C8051 microcontroller core with integrated mixed-signal resources, on-chip power-on reset, a VDD monitor, a watchdog timer, and an internal clock oscillator.

An 8-bit mixed-signal MCU is a microcontroller that places a processor core, digital control logic, and analog or timing functions on one integrated circuit. Within the semiconductor hierarchy, the C8051F410-GQ belongs to the C8051 family of 8-bit microcontrollers and to the broader embedded-control MCU category. Its integrated system-management features reduce the number of external support components required in compact industrial, consumer, and communications-control designs.

The principal performance features include a maximum clock frequency of 50 MHz and 32 KB of on-chip flash. The flash is organized as 32K x 8 bits, supporting firmware storage without an external program-memory device. The C8051F41x family also integrates a watchdog timer, power-on reset, VDD monitoring, and an oscillator. Voltage limits, SRAM capacity, ADC characteristics, timer resources, and GPIO counts should be confirmed against the manufacturer datasheet before a new board is released.

The C8051F410-GQ is identified as a fully integrated, low-power mixed-signal system-on-chip MCU. This integration makes it suitable for compact products where the controller must perform deterministic digital control while also handling monitoring and system-reset functions. Its 50 MHz operating speed provides additional timing headroom for protocol handling, control loops, and peripheral coordination compared with lower-frequency general-purpose 8-bit designs.

Typical design uses include industrial control modules, sensor-interface controllers, building and automation equipment, compact communications products, and low-power embedded control systems. The device is particularly relevant when the design needs 32 KB of internal flash and integrated power supervision rather than a high-pin-count MCU with several discrete support components.

PCB planning should use the 32-LQFP 7 x 7 mm land pattern and preserve access to power, ground, clock, programming, and reset functions. Confirm pin multiplexing, analog-input limits, decoupling requirements, and exposed programming pins from the manufacturer pinout and datasheet before routing.

This product overview combines the exact C8051F410-GQ ordering information, verified distributor attributes, practical MCU selection guidance, and a conservative same-package comparison. It also distinguishes the verified C8051F41x family member from alternatives that cannot be confirmed as true pin-to-pin drop-in replacements.

Alternativas directas para C8051F410-GQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con C8051F410-GQ (mismo factor de forma y huella) — difiere en Maximum Clock Frequency, Package, ADC Resolution, Microcontroller Type.

Silicon Labs
Maximum Clock Frequency: 25 MHz
Package: 32-LQFP, 7 mm x 7 mm
ADC Resolution: 10 bits
Comparar con C8051F410-GQ →
Silicon Labs
ADC Resolution: 12 bit
Comparar con C8051F410-GQ →

C8051F412-GQ

✅ Sustitución directa
Silicon Labs
📦 32-LQFP (7x7)
8-bit mixed-signal Flash microcontroller · High-speed pipelined 8051-compatible core · 50 MHz · 50 MIPS · 16 KB (16K x 8) · 2.25 KB · 12 bit · 24 channels

Consulte el precio

Ver hoja de datos →

C8051F410-GQ Valores máximos y características eléctricas

Microcontroller Type 8-bit mixed-signal MCU
Processor Core C8051 8051-compatible core
Frecuencia de reloj máxima 50 MHz
Flash Memory Size 32 KB
Flash Organization 32K x 8 bits
Encapsulado 32-LQFP, 7 x 7 mm
Tipo de montaje Surface mount
Power-On Reset Integrated
VDD Monitor Integrated
Watchdog Timer Integrated
Clock Oscillator Integrated

Guía de configuración de pines de C8051F410-GQ 32-lqfp, 7 x 7 mm

Configuración de pines para C8051F410-GQ (encapsulado 32-lqfp, 7 x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 32-lqfp, 7 x 7 mm para C8051F410-GQ

No hay datos detallados de patillaje disponibles para C8051F410-GQ.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

C8051F410-GQ es adecuado para 6 aplicacións: Industrial Equipment Controllers, Sensor Interface Modules, Building Automation Units, Communications Equipment, Consumer Appliance Controls, Low-Power Embedded Products.

🏭

Industrial Equipment Controllers

The C8051F410-GQ fits compact industrial controllers that require deterministic 8-bit processing, 32 KB of internal program memory, and integrated supervisory functions. Its 50 MHz operating rate provides timing margin for control logic, state machines, and communication service routines. The integrated watchdog, VDD monitor, and power-on reset support dependable recovery and power-sequence handling. In an industrial design, verify the exact supply limits and temperature grade against the manufacturer documentation. This approach also simplifies firmware maintenance because firmware can be held entirely in the MCU’s 32 KB flash rather than requiring a separate program-memory IC.

🧩

Sensor Interface Modules

The C8051F410-GQ is suitable for compact sensor-interface modules that need local acquisition control, threshold logic, status reporting, and periodic communication handling. Its mixed-signal MCU architecture is intended for applications combining digital processing with analog-related functions, while the 50 MHz clock supports responsive control-loop scheduling. The 32 KB of on-chip flash can hold firmware, calibration tables, and configuration data. Designers should use the manufacturer pin-description and peripheral tables to assign analog inputs, and should preserve clean grounding and short analog traces to avoid degrading sensor signals during conversion.

🏠

Building Automation Units

For building-automation controllers, the C8051F410-GQ can coordinate sensor inputs, actuator commands, operating schedules, and diagnostic reporting within a compact surface-mount design. Its 50 MHz 8-bit core is well matched to low-bandwidth control tasks that do not require a high-performance application processor. Integrated watchdog and VDD monitoring improve recovery behavior after electrical faults or firmware lockups, while the 32 KB flash supports a meaningful local application program. The final design should budget decoupling capacitance, isolate long external wiring, and follow the 32-LQFP layout recommendations in the manufacturer documentation.

🌐

Communications Equipment

The C8051F410-GQ can serve as the supervisory controller in compact communications equipment where a low-power 8-bit MCU handles framing, configuration, status monitoring, and peripheral control. Its 50 MHz clock offers processing margin for protocol tasks and interrupt-driven data movement, while 32 KB of flash provides room for embedded firmware. Integrated watchdog supervision helps recover a communications node if control software stops responding. Engineers should confirm the exact serial-interface resources and pin assignments for the ordering code, then isolate communication transceivers and clocks to prevent high-speed edges from coupling into sensitive control signals.

🔧

Consumer Appliance Controls

The C8051F410-GQ is applicable to compact consumer-appliance control boards that combine user inputs, sensor monitoring, motor or actuator sequencing, and diagnostic functions. A 50 MHz 8-bit MCU supports responsive multitasking without a larger processor, and the 32 KB flash reduces the need for external program storage. The integrated power-on reset, VDD monitor, and watchdog improve startup behavior and fault recovery in unattended equipment. Before finalizing a consumer design, confirm electrical limits, environmental requirements, and package-level production details from the manufacturer documentation, and provide local decoupling close to the power pins.

🔋

Low-Power Embedded Products

The C8051F410-GQ is a candidate for low-power embedded products that require local control and firmware storage in a small 7 x 7 mm package. Silicon Labs positions the C8051F41x family as a low-power mixed-signal MCU family, and the target integrates reset, voltage monitoring, watchdog, and oscillator functions that can reduce support-component count. Its 32 KB flash allows a self-contained control application. Power-budget decisions should still be based on the device’s specified operating modes and supply limits. Use the manufacturer’s clock and power-management guidance to select the operating configuration that meets response-time and standby-current requirements.

What is the operating frequency of the C8051F410-GQ?
The C8051F410-GQ operates at up to 50 MHz. According to the Silicon Labs product information for the C8051F41x family, this is an 8-bit mixed-signal MCU with an integrated low-power system-on-chip architecture. The 50 MHz clock rate provides timing headroom for protocol handling, digital control loops, and peripheral coordination in compact embedded systems.
How much program memory does the C8051F410-GQ have?
The C8051F410-GQ contains 32 KB of flash program memory organized as 32K x 8 bits. The DigiKey listing identifies this configuration directly. On-chip flash lets the controller retain its firmware without an external program-memory device, simplifying PCB routing and reducing the component count of compact embedded-control products.
What package is used by the C8051F410-GQ?
The C8051F410-GQ uses a 32-LQFP package measuring 7 x 7 mm. The manufacturer’s C8051F41x family information and distributor listings identify the same package. Its compact surface-mount format supports dense industrial, communications, and automation designs, but the board layout must follow the manufacturer’s 32-LQFP land pattern and pin assignments.
Where can I download the C8051F410-GQ datasheet PDF?
The official C8051F41x documentation is available through the Silicon Labs product page at https://www.silabs.com/mcu/8-bit-microcontrollers/c8051f41x. Use the datasheet link on that page for electrical characteristics, memory maps, timing, package drawings, and the authoritative 32-pin description. The C8051F410-GQ pin assignment should be checked against the exact ordering code.
What is the difference between C8051F410-GQ and C8051F412-GQ?
The C8051F410-GQ and C8051F412-GQ belong to the C8051F41x family, but they are not established as identical parts. The C8051F410-GQ is identified as an 8-bit, 50 MHz MCU with 32 KB of flash in a 32-LQFP package. Before substituting the C8051F412-GQ, compare its pin multiplexing, memory map, peripheral set, supply limits, and timing requirements in the manufacturer documentation.
When should I choose the C8051F410-GQ over another 8-bit MCU?
Choose the C8051F410-GQ when a design needs the C8051F41x mixed-signal architecture, a 50 MHz operating rate, 32 KB of internal flash, and integrated power-on reset, VDD monitoring, watchdog, and oscillator functions. It is especially suitable for compact embedded controllers where reducing external support components and maintaining an established 8051 software ecosystem are more important than using a wider MCU architecture.
Is the C8051F410-GQ suitable for industrial control applications?
The C8051F410-GQ is suitable for many compact industrial-control applications because it combines a 50 MHz 8-bit core, 32 KB of internal flash, watchdog supervision, VDD monitoring, and power-on reset in a 7 x 7 mm LQFP. For a deployed industrial product, also verify the specified operating-temperature grade, supply range, EMC requirements, and relevant agency approvals before releasing the design.
What can replace the C8051F410-GQ?
No cross-manufacturer drop-in replacement for the C8051F410-GQ has been established. A valid replacement must match the 32-LQFP footprint, pin functions, memory organization, clocking, peripherals, supply voltage, and firmware assumptions—not merely the 8-bit MCU category. Use the Request a Quote form on this page to discuss exact-MPN sourcing, and request manufacturer documentation before considering any substitute.
Is there an exact-footprint replacement for the C8051F410-GQ?
The C8051F410-GQR is closely related to the C8051F410-GQ, but it is primarily a different ordering and packaging option rather than a useful engineering alternative with distinct functionality. Production designers should treat the suffix difference as a controlled procurement decision and confirm reel configuration, temperature grade, and marking directly from the manufacturer’s ordering information.
Where can I buy the C8051F410-GQ online?
Use the Request a Quote form on this page to request the C8051F410-GQ with the required package, quantity, and production schedule. The form is the appropriate route for current commercial availability and lead-time confirmation. Provide the exact suffix C8051F410-GQ in the request to avoid confusion with related C8051F410 or C8051F41x ordering codes.
What is the price of the C8051F410-GQ?
Current commercial pricing for the C8051F410-GQ is obtained through the Request a Quote form on this page. The form supports quantity-specific sourcing and avoids publishing a stale unit figure. Include the target order quantity, required delivery date, and packaging preference so the supplier can confirm the exact C8051F410-GQ ordering code and current commercial terms.
What is the lead time for the C8051F410-GQ?
The current lead time depends on the requested quantity, scheduled delivery date, and confirmed inventory position. Submit the C8051F410-GQ quantity and required date through the Request a Quote form on this page. This gives buyers a direct way to request a production commitment without relying on an outdated listing or a generic stock estimate.
Is the C8051F410-GQ in stock?
Stock should be confirmed for the exact C8051F410-GQ ordering code through the Request a Quote form on this page. The form records the quantity and delivery requirement needed for an inventory check and allows procurement to request current availability, allocation, and a committed lead time before the purchase order is released.
What are the key specifications of the C8051F410-GQ that engineers should know?
The C8051F410-GQ is an 8-bit mixed-signal MCU with a maximum clock frequency of 50 MHz and 32 KB of flash organized as 32K x 8 bits. It is packaged in a 32-LQFP measuring 7 x 7 mm and integrates power-on reset, VDD monitoring, a watchdog timer, and an oscillator. Silicon Labs describes the C8051F41x family as low-power mixed-signal system-on-chip devices.
Does the C8051F410-GQ include ADC and communication peripherals?
The C8051F410-GQ belongs to a mixed-signal MCU family, but its exact ADC resolution, channel count, and communication peripherals are not stated by the product listings for this ordering code. The manufacturer datasheet defines those resources and their pin assignments. Use those tables during schematic and firmware planning rather than assuming that every peripheral in the wider C8051F41x family is present on this device.

Datos de referencia de ingeniería para C8051F410-GQ — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the C8051F410-GQ when the design requires a compact 8-bit mixed-signal MCU with a 50 MHz clock, 32 KB of internal flash, and integrated power-on reset, VDD monitoring, watchdog, and oscillator functions. It is well suited to industrial controllers, sensor interfaces, appliance controls, communications equipment, and compact automation modules using the established C8051 ecosystem. The C8051F412-GQ is the relevant same-package candidate for evaluation when its exact ADC resources, memory map, timer set, pin multiplexing, and firmware requirements are confirmed as compatible. Do not select a generic 8-bit MCU merely because its speed and flash capacity are similar; a true replacement must also preserve the 32-LQFP land pattern and pin-level behavior. For legacy production transfers, keep the full ordering suffix under change control and verify programmer, programming interface, temperature grade, and reel or tray configuration.

Comparación con alternativas

Parámetro Este producto C8051F412-GQ
Package 32-LQFP (7x7) 32-LQFP (7x7)
Brand Silicon Labs Silicon Labs
Microcontroller Type 8-bit mixed-signal MCU 8-bit mixed-signal MCU
Maximum Clock Frequency 50 MHz 50 MHz
Flash Memory 32 KB (32K x 8 bits) 32 KB
Integrated Watchdog Yes Yes
Integrated VDD Monitor Yes Yes
Power-On Reset Yes Yes

Diferenciadores clave

  • Combines 32 KB of internal flash with a 50 MHz 8-bit core (frente a C8051F412-GQ)
  • Integrated supervision reduces external support circuitry (frente a C8051F412-GQ)
  • Compact 32-LQFP footprint supports space-constrained assemblies (frente a C8051F412-GQ)

Notas de diseño

Route the 32-LQFP footprint against the manufacturer’s package drawing and pin table rather than relying on a generic LQFP library. Keep the MCU, its decoupling capacitors, clock components, reset network, and programming access on the same side of the board when possible. Shorten high-current supply paths and connect the ground plane through multiple nearby pins. This is especially important because an incorrectly assigned multiplexed pin can change a peripheral function without producing an obvious package-level error.

Place the required input capacitors at the C8051F410-GQ power pins and return their ground ends directly into the surrounding ground plane. Select capacitor voltage ratings and tolerances according to the confirmed supply range and application environment. If the board includes an analog sensor node, separate analog and digital return paths where practical and keep switching nodes away from the MCU’s sensitive input pins. Verify startup behavior across the intended supply ramp because reset and VDD-monitor thresholds depend on the exact electrical characteristics.

Do not treat the C8051F41x family name as proof that every peripheral is present on the C8051F410-GQ. Check the ordering-code-specific pin table, memory map, ADC channels, timers, and communication blocks before writing firmware or assigning PCB nets. Also verify clock-source requirements and programming connections. A footprint match alone does not establish drop-in compatibility when a replacement changes pin multiplexing or peripheral availability.

Keep the 50 MHz clock route short and controlled, with no unnecessary test pads or stubs, and follow the manufacturer’s recommended loading and routing. Provide a stable supply reference to minimize timing disturbance. For communication signals leaving the device, use controlled-impedance routing where required and keep external drivers and connectors away from sensitive MCU inputs. Firmware should use the integrated watchdog and VDD-monitor functions for fault recovery instead of relying on an external supervisory circuit for every reset condition.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The product descriptions identify the C8051F41x family as a low-power mixed-signal MCU family but do not explicitly establish the target’s compliance status. AEC-Q100 is not applicable to this part because it is not identified as an automotive-qualified device.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

c8051f410 gqr c8051f410 datasheet c8051f410 pdf C8051F410-GQ datasheet C8051F410-GQ pinout C8051F410-GQ replacement C8051F410-GQ equivalent C8051F410-GQ vs C8051F412-GQ C8051F410-GQ 50MHz MCU C8051F410-GQ 32KB flash C8051F410-GQ 32-LQFP Silicon Labs C8051F410-GQ C8051F410-GQ price C8051F410-GQ stock

Componentes & términos relacionados

Silicon Labs C8051F410-GQ C8051F412-GQ C8051F41x C8051F410-GQR 8-bit microcontroller mixed-signal MCU embedded system-on-chip 8051 instruction set embedded control 50 MHz clock frequency 32 KB flash memory 32K x 8 flash organization watchdog timer VDD monitor power-on reset integrated oscillator 32-LQFP package LQFP family surface-mount package industrial control sensor interface building automation communications equipment
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ