C8051F567-IQ - 50MHz 16KB Flash 8-Bit MCU | Silicon Labs
N.º de pieza: C8051F567-IQ ✗ Fin de vidaC8051F567-IQ Descripción general
A microcontroller is a programmable system-on-chip that integrates a processor core, non-volatile Flash, working RAM, oscillators, timers, and communication peripherals into one device. An embedded 8051 MCU belongs to the microcontroller hierarchy used for control, monitoring, data acquisition, and communication tasks. The C8051F56x family extends that concept into a mixed-signal platform, allowing analog measurement and digital control functions to share one compact system-on-chip.
The C8051F567-IQ provides a 50MHz operating frequency, 50MIPS-class throughput, 16KB of Flash for firmware, and 2.25KB of RAM. Its serial connectivity includes SPI, UART, and I2C, while the family datasheet describes up to 33 port I/O, a 5V push-pull option, an on-chip voltage regulator, power-on reset, a VDD monitor, a watchdog timer, and a clock oscillator. Flash can also be reprogrammed in circuit for firmware updates.
The mixed-signal architecture supports analog measurement with up to 200ksps conversion performance and up to 32 external single-ended inputs. The ADC reference can be selected from the on-chip reference, an external reference pin, or VDD. This combination of a fast 8051 core, dedicated serial interfaces, and integrated analog acquisition makes the device suitable for compact embedded controllers that must sense, condition, and transmit external analog data.
Typical applications include industrial sensor nodes, motor and process controllers, building automation modules, instrumentation front ends, communication bridges, and compact embedded data-acquisition systems. SPI can connect external transceivers or memory, UART supports point-to-point host communication, and I2C supports low-speed peripheral buses. The 32-LQFP package also keeps the design compatible with conventional surface-mount assembly processes.
Designers should follow the pin-description table in the manufacturer datasheet when assigning analog inputs, supply pins, oscillator connections, and debug signals. Decoupling requirements, the external analog reference arrangement, and unused-pin treatment should follow the family reference design to limit noise coupling into the measurement channels.
This page combines package, memory, interface, and mixed-signal specifications with practical component-selection guidance. It also organizes same-footprint alternatives, comparison parameters, sourcing instructions, and engineering design notes to support faster evaluation of the C8051F567-IQ in embedded control designs.
Alternativas directas para C8051F567-IQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con C8051F567-IQ (mismo factor de forma y huella) — difiere en Package, Product Type, RAM.
C8051F565-IQ
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
C8051F563-IQ
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
C8051F560-IQ
✅ Sustitución directaConsulte el precio
Ver hoja de datos →C8051F582-IQ
✅ Sustitución directaConsulte el precio
Ver hoja de datos →C8051F541-IQ
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
C8051F567-IQ Valores máximos y características eléctricas
| Product Type | 8-bit mixed-signal microcontroller |
| Manufacturer | Silicon Labs |
| Series | C8051F56x |
| Frecuencia de reloj máxima | 50 MHz |
| Maximum Instruction Throughput | 50 MIPS |
| Processor Architecture | 8-bit 8051 |
| Flash Memory | 16KB (16K x 8) |
| RAM | 2.25KB |
| Encapsulado | 32-LQFP (7x7 mm) |
| Tipo de montaje | Surface Mount |
| Serial Interfaces | SPI, UART, I2C |
| ADC Conversion Rate | Up to 200 ksps |
| External Single-Ended Inputs | Up to 32 |
| ADC Reference Options | On-chip VREF, external pin, or VDD |
| Port I/O | Up to 33 ports with 5V push-pull option |
| On-Chip Resources | Voltage regulator, power-on reset, VDD monitor, watchdog timer, clock oscillator |
| In-Circuit Programming | Supported |
| Operating Voltage | 5 V |
| Estado RoHS | Compliant |
Guía de configuración de pines de C8051F567-IQ 32-lqfp (7x7 mm)
Configuración de pines para C8051F567-IQ (encapsulado 32-lqfp (7x7 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para C8051F567-IQ.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
C8051F567-IQ es adecuado para 6 aplicacións: Industrial Sensor and Condition Monitoring, Embedded Data-Acquisition Controller, Communication and Protocol Bridge, Building Automation and HVAC Control, Motor and Process Control Front End, Portable Instrument and Field Programmable Device.
Industrial Sensor and Condition Monitoring
The C8051F567-IQ suits compact condition-monitoring controllers because its mixed-signal section supports conversion rates up to 200ksps and up to 32 external single-ended inputs. Place the ADC inputs behind short, shielded analog traces and use the selectable on-chip, external, or VDD reference to suit the sensor signal chain. The 50MHz core provides processing headroom while 16KB of Flash stores sampling, filtering, threshold, and event-handling firmware. SPI, UART, or I2C can then carry measurements to a local gateway, data logger, or service interface. For industrial deployment, verify the exact temperature limits and monitor the supply rails with the integrated VDD facility.
Recomendado
Embedded Data-Acquisition Controller
The C8051F567-IQ can form the core of an embedded data-acquisition unit when several analog channels must be scanned and results transmitted. Its mixed-signal resources accept up to 32 external single-ended inputs, and the ADC reference can be tied to an external precision reference or VDD for simpler designs. The 50MHz processor handles acquisition sequencing and local processing, while 16KB of Flash holds firmware and 2.25KB of RAM supports buffers. A serial ADC can instead be connected through SPI when channel count, isolation, or resolution exceeds the on-chip converter. Validate input bandwidth, acquisition timing, and reference accuracy in the final analog design.
Recomendado
Communication and Protocol Bridge
The C8051F567-IQ is appropriate for a compact protocol bridge because it provides SPI, UART, and I2C on the same 8-bit device. A master can poll an I2C sensor, configure an SPI transceiver, and expose status through UART while the 50MHz core maintains deterministic timing. Its 16KB of in-circuit-programmable Flash supports protocol conversion, framing, and field-update functions. In such designs, keep UART and SPI traces away from sensitive analog inputs, provide a continuous ground reference, and assign unused pins according to the family pin table. The integrated watchdog timer, power-on reset, and VDD monitor support autonomous operation in unattended equipment.
Recomendado
Building Automation and HVAC Control
The C8051F567-IQ can manage HVAC or building-automation nodes that combine analog sensor inputs with serial control interfaces. Its ADC capability supports temperature, occupancy, or pressure inputs, while I2C connects environmental sensors and SPI or UART reaches remote modules. The 50MHz operating rate provides quick sampling and control response, and the on-chip regulator, power-on reset, watchdog, and VDD monitor simplify robust node design. Use a regulated 5V supply, decouple each supply connection close to the device, and isolate motor or relay switching nodes from the analog section. Confirm the industrial temperature grade and EMC requirements before volume deployment.
Recomendado
Motor and Process Control Front End
The C8051F567-IQ can serve as the supervisory controller in a small motor or process-control front end when fast sampling and multiple interfaces are priorities. Analog inputs can monitor current, position, or pressure, and the 50MHz core executes control calculations using 2.25KB of RAM. UART provides a service or tuning path, SPI can reach external drivers or converters, and I2C supports configuration peripherals. Because a switching motor stage can inject large transients, keep switching current paths away from ADC inputs and provide a low-impedance return between analog and power sections. Review watchdog behavior and startup timing so unexpected resets cannot leave the controlled output in an unsafe state.
Recomendado
Portable Instrument and Field Programmable Device
The C8051F567-IQ fits portable instrumentation where 16KB of Flash is sufficient for firmware and in-circuit programming simplifies field updates. Its mixed-signal section can acquire sensor data, while UART or USB bridging circuitry can exchange records with a host. The 50MHz core leaves processing capacity for calibration, filtering, and local display control. Because the product is obsolete, design a boot strategy that protects calibration data and recovers from an interrupted firmware update. Confirm the exact memory organization, programming interface, and regulator behavior in the family documentation before creating a new production design.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para C8051F567-IQ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | C8051F565-IQ | C8051F563-IQ | C8051F560-IQ | C8051F582-IQ | C8051F541-IQ |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Serial Interfaces | SPI, UART, I2C | SPI, UART, I2C | SPI, UART, I2C | SPI, UART, I2C | SPI, UART, I2C | SPI, UART, I2C |
Diferenciadores clave
- Combines a 50MHz core with integrated mixed-signal acquisition (frente a C8051F541-IQ)
- Provides three serial interfaces without requiring external protocol controllers (frente a C8051F565-IQ)
- Supports in-circuit programming for field firmware maintenance (frente a C8051F560-IQ)
- Matches the established 32-LQFP 7x7 mm assembly footprint (frente a C8051F582-IQ)
Notas de diseño
Place the MCU supply bypass capacitors directly beside the supply and ground pins, with the shortest return path to the ground plane. Route analog inputs away from UART, SPI, clock, and relay-driving traces, and use a quiet analog ground region where the board stack-up permits. Confirm every 32-LQFP land pattern and the exposed versus non-exposed pad arrangement against the package drawing before releasing artwork.
Keep the oscillator loop compact and keep high-current switching nodes separated from the clock and ADC pins. If an external ADC is used instead of the internal converter, route its interface through SPI with a controlled return path and account for input capacitance in the firmware timing. Use the pin-description table for alternate-function assignments so peripheral multiplexing does not create contention on shared port pins.
Do not approve a same-family replacement solely from the package name. Compare Flash size, RAM, oscillator limits, ADC channels, serial peripheral resources, interrupt vectors, and programming pins, then rerun the firmware on the selected device. The part is obsolete, so preserve a migration plan toward a supported MCU family before committing a new long-lived production program.
Design the 5V input and any regulator path around the device's specified operating range and load current. Follow the family reference schematic for the on-chip regulator, bypass values, and external component selection. Because the integrated watchdog, power-on reset, and VDD monitor support autonomous operation, test brownout behavior, startup delay, and watchdog recovery during hardware validation.
Información de cumplimiento
RoHS compliance is identified for the C8051F567-IQ. The -IQ suffix denotes the industrial-temperature ordering option. No vehicle-specific AEC-Q100 qualification is indicated for this MCU.