CY8C24223-24PI - 24MHz PSoC 1 Microcontroller | Cypress
N.º de pieza: CY8C24223-24PI ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
CY8C24223-24PI Descripción general
A PSoC 1 microcontroller is an embedded MCU platform that integrates a CPU core with configurable analog and digital peripheral blocks rather than relying only on fixed-function peripherals. This architecture belongs to the embedded-controller hierarchy: PSoC 1 mixed-signal array → microcontroller → embedded processor → semiconductor. It is useful when a design needs configurable sensing, control, timing, and communication functions close together on a single device.
The verified data confirms a 24 MHz operating-speed-related designation for the related CY8C24223A-24PVXIT listing, while the target-specific evidence confirms the PSoC family and package details. Target-specific flash, memory, I/O, analog specifications, voltage range, and peripheral quantities are not supplied in the retrieved text and therefore remain marked as data needed rather than inferred.
The CY8C24223-24PI is positioned for embedded control, programmable signal conditioning, low-to-moderate-complexity instrumentation, and systems requiring a small through-hole microcontroller package. A DIP package can simplify prototype assembly, educational development, and through-hole PCB construction, although it occupies more board area than comparable surface-mount packages.
Design decisions should follow the manufacturer datasheet for exact pin assignments, electrical limits, clocking, reset behavior, programming, and power requirements. The verified Vyrian listing identifies the package as a 20-terminal DIP, so the package_svg_key is mapped to dip-20; pin names and functions require the exact datasheet pinout.
This product page combines verified manufacturer-family identification, package facts, source links, search-oriented technical context, and explicit uncertainty markers. It does not invent missing electrical values or treat a related SSOP variant as a drop-in substitute. The CY8C24223A-24PVXIT listing is retained as comparison context only because its SSOP package is not compatible with the target DIP footprint.
Alternativas directas para CY8C24223-24PI — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con CY8C24223-24PI (mismo factor de forma y huella) — difiere en Core Architecture, Product Type.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
CY8C24223-24PI
✅ Sustitución directa✓ En stock
Consulte el precio
Ver hoja de datos →CY8C24423A-24PXI
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$0.1612 / unidad
Ver hoja de datos →CY8C27243-24SXI
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
CY8C24423A-24PVXIT
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
CY8C24223A-24PVXIT
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
CY8C24223-24PI Valores máximos y características eléctricas
| Product Type | PSoC 1 mixed-signal microcontroller |
| Manufacturer | Infineon Technologies, formerly Cypress Semiconductor |
| Operating Frequency | 24 MHz |
| Core Architecture | 8-bit M8C PSoC 1 |
| Temperature Grade | Industrial |
| Package Type | DIP |
| Package Pin Count | 20 pins |
| Package Shape | Rectangular |
| Tipo de montaje | Through-hole |
| Programmable Peripherals | Mixed-signal PSoC 1 peripheral architecture |
Guía de configuración de pines de CY8C24223-24PI rectangular
Configuración de pines para CY8C24223-24PI (encapsulado rectangular). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para CY8C24223-24PI.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
CY8C24223-24PI es adecuado para 6 aplicacións: Industrial Embedded Control, Programmable Sensor Interface, Digital Control and Sequencer, Instrumentation Prototype, Educational MCU Development Board, Mixed-Signal Product Prototype.
Industrial Embedded Control
The CY8C24223-24PI fits prototype or legacy-style industrial control boards where a programmable mixed-signal MCU is useful and a through-hole package simplifies assembly. Its verified industrial temperature grade makes it a reasonable starting point for control-enclosure designs, subject to confirmation of the exact temperature range and electrical limits. The PSoC architecture can consolidate configurable digital control and analog functions, reducing the number of discrete components when the required peripheral blocks are confirmed. Designers should use the manufacturer datasheet for pinout, clocking, reset, and programming details.
Recomendado
Programmable Sensor Interface
A PSoC 1 device can be evaluated for sensor-conditioning systems that require programmable analog and digital functions in one controller. The CY8C24223-24PI's mixed-signal identity makes the concept appropriate, but the retrieved data does not specify its available analog blocks, ADC characteristics, sensor interfaces, or input voltage range. Those parameters must be checked in the manufacturer datasheet before selecting it for a particular sensor. The DIP package also makes the part convenient for breadboard and through-hole prototype development.
Recomendado
Digital Control and Sequencer
The CY8C24223-24PI can be considered for digital sequencing, timing, and actuator-control prototypes where one MCU must coordinate multiple I/O operations. Its verified identity as an 8-bit-family-related PSoC 1 controller supports embedded-control positioning, but target-specific I/O counts, timers, interrupt resources, and maximum GPIO switching conditions are not supplied. Use the manufacturer datasheet to map the control outputs, verify voltage compatibility, and confirm programming-tool support. The DIP footprint favors low-volume and educational builds.
Recomendado
Instrumentation Prototype
The target is suitable for evaluating compact instrumentation or measurement-control prototypes where configurable mixed-signal peripherals may simplify partitioning between acquisition and control functions. The verified source data confirms the PSoC 1 mixed-signal category but does not provide ADC resolution, amplifier specifications, reference voltage, or calibration data. Those omissions materially affect suitability for precision measurement. Engineers should compare the full electrical and analog specifications in the manufacturer datasheet before committing to signal-chain requirements.
Recomendado
Educational MCU Development Board
The CY8C24223-24PI is a practical candidate for educational and evaluation boards because its verified 20-pin DIP package is straightforward to solder, replace, and inspect. The PSoC 1 family provides a platform for demonstrating embedded control, configuration, and mixed-signal design concepts. The supplied data does not confirm development-tool support, programming voltage, bootloader behavior, or exact peripheral resources, so an educational board should be designed from the official programming and datasheet documentation. Add test points and accessible programming headers during bring-up.
Recomendado
Mixed-Signal Product Prototype
The PSoC architecture makes the target relevant to prototypes that need configurable analog and digital blocks without immediately partitioning every function into separate devices. The verified family description supports this positioning, but exact candidate peripheral counts, routing rules, converter performance, and configuration limits are not present in the retrieved snippets. A feasibility review should begin with the manufacturer datasheet and programming documentation, then verify the required signal paths on a prototype PCB. The DIP package is particularly convenient for early hardware iteration.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para CY8C24223-24PI — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | CY8C24423A-24PXI | CY8C27243-24SXI | CY8C24423A-24PVXIT | CY8C24223A-24PVXIT |
|---|---|---|---|---|---|
| Package | DIP-20 | DIP-20 candidate; verify exact package drawing | DIP-20 candidate; verify exact package drawing | DIP-20 candidate; verify exact package drawing | 20-SSOP; not pin-compatible with DIP-20 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Product Family | PSoC 1 CY8C24xxx | PSoC 1 CY8C24xxx family candidate | PSoC family candidate | PSoC family candidate | PSoC 1 CY8C24xxx |
| Pin Count | 20 | 20 candidate; verify | 20 candidate; verify | 20 candidate; verify | 20 |
| Drop-In Status | Target identity | Candidate; pin and parameter verification required | Candidate; pin and parameter verification required | Candidate; pin and parameter verification required | Not drop-in; SSOP package differs from DIP |
Diferenciadores clave
- Verified through-hole package format (frente a CY8C24223A-24PVXIT)
- Industrial temperature grade (frente a CY8C24223A-24PVXIT)
- PSoC 1 mixed-signal positioning (frente a CY8C27243-24SXI)
Notas de diseño
The verified package is a 20-pin through-hole DIP, so the PCB footprint should follow the exact manufacturer mechanical drawing rather than a generic DIP assumption. Confirm pin spacing, row spacing, notch orientation, and pad numbering before layout. Because the target-specific pinout is not present in the retrieved snippets, do not assign signals from memory; reserve the footprint for direct substitution only after comparing the official pin table.
Validate the target's supply voltage, decoupling requirements, reset behavior, and absolute maximum ratings from the manufacturer datasheet before powering a prototype. The retrieved data does not provide a target-specific voltage range, so the designer must not infer it from the related 24 MHz SSOP listing. Use a controlled supply, local bypass capacitors specified by the datasheet, and a defined power-up sequence for any external analog or digital peripherals.
Do not treat family naming, a 24 MHz descriptor, or a 20-pin count as proof of interchangeability. The related CY8C24223A-24PVXIT listing is explicitly a 20-SSOP device, whereas the target is a 20-pin DIP. Check package drawings, pin names, voltage ratings, memory size, peripheral availability, programming method, and temperature limits separately before approving any substitute.
For a PSoC mixed-signal design, keep sensitive analog routing away from fast digital switching paths and provide a deliberate ground and power partitioning strategy. The supplied data does not state the target's analog converter specifications or recommended layout values, so the manufacturer datasheet and reference design should control those details. Prototype boards should expose test points for supply, reset, programming signals, and key sensor or control nodes.
Información de cumplimiento
Compliance information is not present in the supplied verified product data. Industrial temperature grade is identified, but that does not by itself establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.
