CY8C3665AXA-016 - 67MHz 8-Bit PSoC 3 MCU | Infineon
N.º de pieza: CY8C3665AXA-016 ✓ ActivoCY8C3665AXA-016 Descripción general
A PSoC 3 is a programmable system-on-chip combining an embedded microcontroller with configurable analog and digital peripherals. In the product hierarchy, it sits between a conventional 8-bit MCU and a more integrated mixed-signal embedded platform. This integration allows product designers to consolidate control logic, analog sensing, signal conditioning, communications, and general-purpose I/O into one component while retaining firmware-based configuration.
The CY8C3665AXA-016 provides 32 KB of flash organized as 32K x 8, together with an operating frequency of up to 67 MHz. The 100-pin TQFP offers substantially more I/O and peripheral connectivity than small-outline 8-bit packages. According to the manufacturer’s product listings, the supported supply-voltage range is 0.5 V to 5.5 V, making the device suitable for mixed industrial, consumer, and embedded-control designs operating from multiple rail levels.
Its 8051-compatible instruction set and dedicated clock and memory resources make the MCU suitable for deterministic embedded control, while the PSoC architecture expands the design options beyond a fixed-function microcontroller. The combination of 67 MHz processing, programmable peripheral blocks, and 32 KB of embedded flash supports protocols, control loops, and state machines without requiring a separate external microcontroller for every peripheral function.
Typical uses include industrial sensor controllers, building and energy-management equipment, consumer appliances, communications modules, and compact embedded products. The large 100-pin package is particularly useful when a design requires numerous GPIO, analog inputs, communication channels, or mixed signal resources on a board with moderate space constraints.
PCB planning should include careful decoupling for each supported supply rail, short clock and signal paths, and compliance with the manufacturer’s package and pin-assignment requirements. Designers should also verify peripheral availability, pin multiplexing, clock limits, and analog performance before committing the footprint to a production layout.
This product page combines the exact manufacturer-related specifications, current sourcing information, package details, application guidance, and validated replacement analysis. It also highlights what is known about the 8051 PSoC 3 architecture without presenting unverified electrical values or assuming that electrically similar devices are pin-compatible replacements.
Alternativas directas para CY8C3665AXA-016 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con CY8C3665AXA-016 (mismo factor de forma y huella) — difiere en Package, Product Type.
CY8C3665AXI-016
✅ Sustitución directaConsulte el precio
Ver hoja de datos →CY8C3665AXA-016 Valores máximos y características eléctricas
| Product Type | 8-bit PSoC 3 CY8C36xx Microcontroller |
| CPU Architecture | 8051-compatible 8-bit core |
| Maximum CPU Frequency | 67 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Operating Voltage Range | 0.5 V to 5.5 V |
| Encapsulado | 100-TQFP (14 x 14 mm) |
| Recuento de pines | 100 pins |
| Tipo de montaje | Surface Mount |
| Device Family | PSoC 3 CY8C36xx |
| Manufacturer | Infineon Technologies |
| Programmable System-on-Chip Type | Mixed-signal MCU with programmable analog and digital resources |
| CPU Word Size | 8 bits |
| Flash Organization | 32K x 8 bits |
Guía de configuración de pines de CY8C3665AXA-016 100-tqfp (14 x 14 mm)
Configuración de pines para CY8C3665AXA-016 (encapsulado 100-tqfp (14 x 14 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para CY8C3665AXA-016.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
CY8C3665AXA-016 es adecuado para 6 aplicacións: Industrial Sensor and Control Hub, Building and Energy Management, Consumer Appliance Controller, Communications Module, Compact Industrial Interface, Portable Measurement Device.
Industrial Sensor and Control Hub
The CY8C3665AXA-016 fits industrial sensor-hub designs that require substantial mixed-signal I/O without using a separate processor for every function. Its 8051-compatible core runs up to 67 MHz, while 32 KB of flash provides space for control firmware, calibration logic, and communication handlers. The 100-pin TQFP also offers room for multiple sensors, actuators, communications channels, and supply connections. Designers should allocate pins according to the datasheet alternate-function matrix and verify that the selected operating grade covers the enclosure temperature and industrial qualification requirements.
Recomendado
Building and Energy Management
The CY8C3665AXA-016 is appropriate for building-control nodes that combine environmental sensing, digital inputs, actuator control, and network communication. A 67 MHz 8051-compatible core can support state-machine processing and protocol handling, while the PSoC 3 programmable resources reduce the need for discrete analog and interface circuitry. Its 0.5 V to 5.5 V operating range supports multiple internal rail domains in power-management designs. Firmware must configure unused pins conservatively, validate communications timing, and keep switching-node and high-current actuator wiring away from sensitive analog traces.
Recomendado
Consumer Appliance Controller
The CY8C3665AXA-016 can serve as the central controller in an appliance that combines a user interface, sensors, motor or relay control, and safety-related state monitoring. Its 32 KB flash provides meaningful code storage for an 8-bit embedded platform, and the 67 MHz CPU allows responsive control of multiple peripherals. The 100-pin package simplifies access to a broad mix of GPIO and communications functions compared with a small MCU package. Firmware should include fail-safe output defaults, watchdog handling, brownout response, and production test coverage for every externally accessible interface.
Recomendado
Communications Module
The CY8C3665AXA-016 is suitable for a small communications controller that must serialize data, manage configuration, and supervise connected sensors. Its 67 MHz maximum CPU frequency provides ample headroom for protocol framing and peripheral scheduling, while 32 KB of flash stores firmware and nonvolatile configuration. The large 100-pin TQFP footprint gives the design direct access to communications pins and programmable digital functions. Signal-integrity performance depends on the selected interface, so traces should be length-controlled, return paths continuous, and external protection placed where required by the system architecture.
Recomendado
Compact Industrial Interface
The CY8C3665AXA-016 works well in a multi-function industrial interface that gathers switch, sensor, and remote-I/O information while maintaining an 8-bit-compatible embedded design. The 67 MHz processor can execute communication tasks concurrently with deterministic control routines, and 32 KB of flash can hold application firmware plus configuration logic. The 100-pin package provides more GPIO options than compact 8- or 16-pin MCUs, reducing the number of external expanders. Layout planning should group logic-level signals, provide local decoupling at supply pins, and use the manufacturer pin-muxing tables to prevent peripheral conflicts.
Recomendado
Portable Measurement Device
The CY8C3665AXA-016 can support a portable measurement instrument that combines sensor conditioning, digital processing, display updates, and data export. The PSoC 3 architecture consolidates programmable control and analog resources around an 8-bit core, while 32 KB of flash accommodates firmware for calibration, data processing, and interface protocols. The 0.5 V to 5.5 V range supports mixed-voltage sensor and logic domains. Battery-powered implementations should enable only required peripherals, use low-power operating modes, and validate sleep current and wake timing against the complete measurement cycle.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para CY8C3665AXA-016 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | CY8C3665AXI-016 |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Package | 100-TQFP (14 x 14 mm) | 100-TQFP (14 x 14 mm) |
| CPU Architecture | 8051-compatible 8-bit | 8051-compatible 8-bit |
| Maximum CPU Frequency | 67 MHz | 67 MHz |
| Flash Memory | 32 KB (32K x 8) | 32 KB (32K x 8) |
| Device Family | PSoC 3 CY8C36xx | PSoC 3 CY8C36xx |
| Ordering Code | AXA-016 | AXI-016 |
Diferenciadores clave
- High-frequency 8-bit PSoC integration (frente a CY8C3665AXI-016)
- Substantial embedded program memory (frente a CY8C3665AXI-016)
- Large mixed-signal package (frente a CY8C3665AXI-016)
Notas de diseño
Plan the 100-pin TQFP layout directly from the manufacturer package drawing and pin-description table. Place decoupling capacitors adjacent to the applicable supply pins, keep the ground return path continuous, and preserve access for programming or test. Because the CY8C3665AXA-016 combines programmable analog and digital resources, reserve pin assignments early and resolve alternate-function conflicts in firmware rather than changing the PCB late in the design cycle.
Design every supply rail for the maximum operating mode rather than the average processor load. The device operates from 0.5 V to 5.5 V, but individual internal rails and peripherals may have narrower valid ranges. Confirm sequencing, decoupling, and brownout behavior in the manufacturer datasheet, and ensure externally connected signals remain within the limits of each supply domain. Use separate filtering paths for sensitive analog supplies if the application requires low-noise measurements.
Route clocks and high-speed communications away from analog inputs, relay drivers, and switching-power nodes. Maintain continuous ground planes, use short return paths, and avoid sharing narrow traces between sensitive analog signals and fast digital traffic. Series damping, isolation, and filtering should be calculated from the actual edge rate and load rather than added generically. Validate the final layout with signal-integrity measurements if communications timing or analog accuracy is critical.
Do not substitute a similarly named PSoC or 8051 device without checking pin names, alternate functions, supply pins, package dimensions, and electrical limits. The AXA and AXI ordering codes require comparison against the exact family documentation. Also avoid assuming that a listing which reports stock guarantees production allocation; confirm quantity, traceability, date-code requirements, and lifecycle status before releasing the component into a long-running production build.
Información de cumplimiento
The available product listings do not establish the compliance or automotive qualification status of the exact CY8C3665AXA-016 ordering code. Obtain current manufacturer compliance and qualification documentation before production release.