DSPIC33EP256MC204-I/ML - 70MIPS 256KB Flash DSC | Microchip
N.º de pieza: DSPIC33EP256MC204-I/ML ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $4.45 | $4,45 |
| 10 | $4.12 | $41,20 |
| 100 | $3.94 | $394,00 |
| 500 | $3.65 | $1.825,00 |
| 1.000 | $3.4 | $3.400,00 |
DSPIC33EP256MC204-I/ML Descripción general
A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral integration and deterministic control behavior of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33EP MC family sits at the top of Microchip's 16-bit embedded control portfolio, purpose-built for closed-loop motor control and power-conversion algorithms such as field-oriented control (FOC).
Key features of this device include a 16-bit Harvard-architecture dsPIC core with integrated DSP multiply-accumulate instructions, high-speed PWM peripherals for motor drive, advanced analog functionality, and connectivity interfaces including I2C, SPI, UART/USART, IrDA, LIN bus, and Quadrature Encoder Interface (QEI). The -I suffix denotes an industrial operating temperature range of -40C to +85C.
Architecturally, the dsPIC33EP core executes most instructions in a single cycle and pairs hardware loop support with two 40-bit accumulators, enabling efficient execution of PID loops, Clarke/Park transforms, and filter functions without external DSP assistance. The Flash is rated for the erase/write cycles specified in the family data sheet DS70000657J.
Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies and PFC stages, inverters, and industrial automation nodes. The dedicated motor-control PWM and QEI peripherals make it a natural fit for servo and e-bike controllers.
Design consideration: pin-selectable peripheral remapping (PPS) provides layout flexibility, but verify QFN thermal pad grounding for heat dissipation at 70 MIPS operation.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternativas directas para DSPIC33EP256MC204-I/ML — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con DSPIC33EP256MC204-I/ML (mismo factor de forma y huella) — difiere en Package, Operating Temperature, Core Architecture, SRAM, Supply Voltage Range.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
DSPIC33EP256MC204-E/ML
✅ Sustitución directa✓ En stock
$3.8 / unidad
Ver hoja de datos →DSPIC33EP256MC204-I/TL
✅ Sustitución directa✓ En stock
$3.78 / unidad
Ver hoja de datos →DSPIC33EP128MC204-I/ML
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$2.98 / unidad
Ver hoja de datos →DSPIC33EP64MC204-I/ML
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$3.6 / unidad
Ver hoja de datos →DSPIC33EP256GM304-I/ML
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
DSPIC33EP256MC204-I/ML Valores máximos y características eléctricas
| Core Architecture | 16-bit dsPIC33E Harvard |
| Maximum CPU Speed | 70 MIPS |
| Program Memory (Flash) | 256 KB (85.5K x 24) |
| SRAM | 32 KB (16K x 16) |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Temperatura de funcionamiento | -40C to +85C (Industrial, -I suffix) |
| Encapsulado | 44-QFN (8x8 mm), ML suffix |
| Tipo de montaje | Surface Mount |
| Communication Interfaces | I2C, SPI, UART/USART, IrDA, LINbus, QEI |
| Family Series | dsPIC33EP MC (Motor Control) |
| Product Type | Digital Signal Controller (DSC) |
| Data Sheet Document | DS70000657J (family data sheet) |
| Peripheral Features | High-Speed PWM, advanced analog peripherals |
| Package Pin Count | 44 pins |
| Estado RoHS | Compliant |
Guía de configuración de pines de DSPIC33EP256MC204-I/ML 44 pins
Configuración de pines para DSPIC33EP256MC204-I/ML (encapsulado 44 pins). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para DSPIC33EP256MC204-I/ML.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
DSPIC33EP256MC204-I/ML es adecuado para 6 aplicacións: BLDC / PMSM Motor Control (FOC), Digital Power Supplies and PFC, Industrial Automation and Embedded Control, Inverters and Renewable Energy Conversion, Automotive-Adjacent and E-Mobility Control, Battery Management and Portable Instrumentation.
BLDC / PMSM Motor Control (FOC)
The DSPIC33EP256MC204-I/ML fits brushless DC and permanent-magnet synchronous motor drives because its 70 MIPS DSP core executes field-oriented control transforms at control-loop rates of 10-20 kHz with single-cycle multiply-accumulate and dual 40-bit accumulators, eliminating an external DSP. The MC-family high-speed PWM generates complementary, dead-time-controlled gate signals for the three-phase inverter, while the Quadrature Encoder Interface decodes position feedback directly. In a typical servo drive, the FOC current loop runs in interrupt context off the PWM trigger, with 256 KB Flash accommodating the control code plus comms and diagnostics. Placing the controller adjacent to the gate drivers keeps analog sense lines short; the trade-off versus an analog ASIC is negligible - one 3.3 V, 44-QFN device replaces the entire discrete control chain.
Recomendado
Digital Power Supplies and PFC
For switch-mode power supplies, Totem-pole PFC, and LLC converters, the DSPIC33EP256MC204-I/ML provides the deterministic control needed for high-frequency power stages. The 70 MIPS core closes voltage and current loops with proportional-integral compensation executed in interrupt context synchronized to the high-speed PWM peripheral, whose fine duty resolution supports converter topologies above 100 kHz. The integrated advanced analog peripherals digitize output voltage, current, and temperature without an external ADC controller, and LIN/UART connectivity enables PMBus-style supervision. The main design consideration is analog noise: route the PWM ground return away from sense traces and use the industrial -40C to +85C rating for server PSU environments. Unlike fixed-function controllers, the 256 KB Flash allows firmware-updatable control laws and fault-logging in the same device.
Recomendado
Industrial Automation and Embedded Control
In factory automation nodes - sensors, actuators, small conveyors, and I/O modules - the DSPIC33EP256MC204-I/ML combines real-time control with robust connectivity. Its I2C, SPI, and dual UART/USART interfaces (with IrDA and LIN bus support) link PLC backbones, HMI panels, and field sensors, while the QEI peripheral reads encoder feedback from rotary tables and positioning stages. The industrial -40C to +85C rating covers unconditioned cabinet environments, and the 3.0-3.6 V operation matches standard 3.3 V logic rails. The 256 KB Flash is large enough to hold a protocol stack plus application logic in one chip, and Peripheral Pin Select remaps communication functions to any available pin, simplifying multi-layer PCB routing. Migration within the dsPIC33EP family preserves the toolchain (MPLAB X, XC16) across the product line.
Recomendado
Inverters and Renewable Energy Conversion
Solar micro-inverters, small wind converters, and battery-backed inverters benefit from the DSPIC33EP256MC204-I/ML's blend of DSP throughput and power peripherals. Maximum power point tracking algorithms run on the 70 MIPS core using the DSP MAC engine for iterative optimization, while the high-speed PWM drives the power stage with synchronized, phase-shifted outputs. On-chip analog channels sample panel voltage/current and grid-side waveforms for anti-islanding and synchronization functions. The 256 KB Flash supports grid-code firmware variants (region-specific settings) in a single hardware BOM, simplifying certification across markets. Thermal design is the key consideration: at continuous 70 MIPS operation from 3.3 V, ensure the QFN exposed pad is soldered to a solid ground pour, and derate for ambient temperatures approaching +85C in sealed outdoor enclosures.
Recomendado
Automotive-Adjacent and E-Mobility Control
E-bike controllers, light electric vehicle motor drives, and auxiliary automotive systems use the DSPIC33EP256MC204-I/ML where its MC-family PWM, QEI, and LIN bus support map directly onto traction and auxiliary motor requirements. LIN connectivity integrates the controller into vehicle body networks, while the 70 MIPS core runs sensorless FOC using the integrated analog for shunt-current sensing. For applications needing a wider temperature envelope, the pin-compatible DSPIC33EP256MC204-E/ML variant is the drop-in choice per the same 44-QFN footprint. Firmware benefits from 256 KB Flash for multi-mode ride profiles and field updates. Layout guidance: keep motor-current shunt traces Kelvin-connected to the analog pins and separate the power ground from the controller ground plane, joining at a single star point to prevent PWM switching noise corrupting ADC readings.
Recomendado
Battery Management and Portable Instrumentation
Battery chargers, pack monitors, and portable test instruments exploit the DSPIC33EP256MC204-I/ML's balance of DSP math, analog peripherals, and low-footprint integration. Charging algorithms (CC/CV, coulomb counting) use the core's DSP MAC for filtering and integration over current-sense samples, while UART/I2C report state-of-charge to host systems. The 44-QFN 8x8 mm package suits dense handheld PCBs, and sleep/idle power modes extend battery life between measurements. The 256 KB Flash retains data-logging firmware plus bootloader space for field updates via UART. A practical design tip: use the on-chip peripherals to wake from sleep on UART activity or analog thresholds, and budget the SRAM (32 KB) for logging buffers - the Harvard architecture keeps filtering inner loops deterministic even while logging. The industrial temperature rating also covers outdoor charging stations.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para DSPIC33EP256MC204-I/ML — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | DSPIC33EP256MC204-E/ML | DSPIC33EP256MC204-I/TL | DSPIC33EP128MC204-I/ML | DSPIC33EP64MC204-I/ML | DSPIC33EP256GM304-I/ML |
|---|---|---|---|---|---|---|
| Package | 44-QFN (8x8 mm) | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Flash Memory | 256 KB | 256 KB | 256 KB | 128 KB (-50%) | 64 KB (-75%) | 256 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Temperature Range | -40C to +85C (Industrial, -I) | Extended (-E grade) | -40C to +85C (Industrial, -I) | -40C to +85C (Industrial, -I) | -40C to +85C (Industrial, -I) | -40C to +85C (Industrial, -I) |
| Family Peripherals | MC (Motor Control): high-speed PWM, advanced analog, QEI | MC family - identical | MC family - identical | MC family - identical | MC family - identical | GM (General Purpose) - fewer motor-control analog features |
Diferenciadores clave
- Full 256 KB Flash capacity (frente a DSPIC33EP128MC204-I/ML)
- Industrial temperature rating with standard availability (frente a DSPIC33EP256MC204-E/ML)
- Dedicated Motor Control (MC) peripheral set (frente a DSPIC33EP256GM304-I/ML)
- Trade-off: SRAM fixed at 32 KB across the family (frente a DSPIC33EP64MC204-I/ML)
Notas de diseño
The DSPIC33EP256MC204-I/ML operates from a 3.0 V to 3.6 V supply with 3.3 V nominal. Decouple every VDD/VSS pair with 0.1 uF ceramic capacitors placed within 2 mm of the pins, and add one bulk 10 uF capacitor near the package. When using flash self-write operations during motor control interrupts, avoid supply dips below 3.0 V - a brown-out configuration (enabled via configuration bits) protects Flash integrity. If the board includes a 5 V rail for gate drivers, level-shift the programming (MCLR/PGD/PGC) lines accordingly, since the device pins are not 5 V tolerant.
Estimated: at full 70 MIPS operation the dsPIC33EP core draws current on the order of tens of milliamperes from 3.3 V, giving roughly 0.1-0.2 W dissipation - well within the QFN-44 (8x8 mm) capability without a heatsink, provided the exposed pad is soldered to a continuous ground pour with an array of thermal vias. However, in sealed enclosures approaching the +85C industrial limit, verify junction temperature using the exact theta-JA value from the family data sheet DS70000657J electrical characteristics section rather than assuming conservative estimates.
For motor-control layouts, keep the ADC current-sense inputs as short Kelvin-connected traces to the shunt resistors, and physically separate the PWM switching-node ground return from the analog ground region, tying them at a single star point. Peripheral Pin Select (PPS) lets you remap UART/SPI pins away from noisy PWM traces - use this to route communication lines on quiet board edges. The QEI encoder inputs benefit from RC filtering (approximately 1 kHz cutoff) to reject motor brush and inverter common-mode noise; configure the digital filter module if encoder glitches appear during high-load PWM bursts.
Three recurring mistakes with dsPIC33EP MC devices: (1) omitting the ICSP programming header (MCLR, PGD, PGC, VDD, GND) - always include a 5-pin header since QFN packages cannot be reprogrammed in-socket; (2) forgetting that configuration bits (oscillator source, brown-out, watchdog) are stored in Flash and are erased on full chip erase - keep a golden configuration record in source control; (3) assuming the -I part is automotive rated - for wider temperature envelopes, specify the pin-compatible DSPIC33EP256MC204-E/ML instead.
Información de cumplimiento
RoHS compliance indicated by Microchip product page and distributor (LCSC/DigiKey) listings. REACH, halogen-free, and conflict-minerals declarations should be confirmed via Microchip's official compliance certificates for this MPN.
