EFM32G222F64G-E-QFP48 - 32MHz Cortex-M3 | Silicon Labs
N.º de pieza: EFM32G222F64G-E-QFP48 ✓ ActivoEFM32G222F64G-E-QFP48 Descripción general
An ARM Cortex-M3 microcontroller is a 32-bit embedded processor built around the ARM Cortex-M3 instruction set. Within the semiconductor hierarchy, it belongs to the microcontroller and embedded-processing category, combining a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces in one package. The EFM32 Gecko platform targets compact, energy-sensitive embedded systems where processing capability must coexist with efficient power management.
The principal benefits of this device include its 32 MHz Cortex-M3 core, 64 kB Flash configuration storage, and 16 kB working RAM. Three 16-bit timers support periodic timing, input capture, output compare, and basic motor-control tasks. The 37 digital I/O pins provide flexible connections for sensors, displays, communication interfaces, and control signals, while the TQFP-48 footprint remains straightforward to inspect and solder using conventional surface-mount assembly methods.
The EFM32G222F64G-E-QFP48 is based on Silicon Labs' EFM32 Gecko low-power platform, which includes fast wake-up behavior and energy-saving operating modes. Its AES hardware adds a dedicated cryptographic capability for systems that need hardware-assisted data protection. These characteristics make it useful in connected sensors, industrial monitoring equipment, compact control systems, and battery-operated products where the combination of processing throughput, memory, and low-power operation is important.
Typical applications include environmental monitoring, smart metering, portable instrumentation, building controls, connected industrial nodes, and embedded sensor hubs. Designers can use the 37 digital I/O pins for discrete sensors and actuators, the 16 kB RAM for working buffers, and the three 16-bit timers for periodic measurement or timing functions. The AES capability is particularly relevant when local data must be protected without offloading every encryption operation to software.
PCB design should preserve the EFM32G222F64G-E-QFP48 power requirements, decoupling, clock stability, and exposed programming or debug access. Place the required bypass capacitors close to their associated supply pins, maintain short return paths for power and ground, and follow Silicon Labs' recommended reference layout. Confirm the exact pin assignments, programming interface, and peripheral multiplexing in the manufacturer datasheet before finalizing a board.
This product page combines the exact target ordering code with verified family-level electrical details, practical application guidance, package considerations, and a strict pin-compatible replacement assessment. It also distinguishes genuine drop-in options from nearby devices that differ in core architecture, memory capacity, or peripheral configuration, helping engineers evaluate replacement risk before committing a new PCB revision.
Alternativas directas para EFM32G222F64G-E-QFP48 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con EFM32G222F64G-E-QFP48 (mismo factor de forma y huella) — difiere en Package.
EFM32G222F64-QFP48
✅ Sustitución directaConsulte el precio
Ver hoja de datos →EFM32G222F64G-E-QFP48 Valores máximos y características eléctricas
| Product Type | ARM Cortex-M3 32-bit microcontroller |
| Series | EFM32 Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 kB |
| RAM | 16 kB |
| Digital I/O Pins | 37 pins |
| Timers | 3 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Cryptographic Hardware | AES |
| Encapsulado | 48-pin TQFP, 7 x 7 mm |
| Tipo de montaje | Surface mount |
| Core | ARM Cortex-M3 |
| Word Length | 32-bit |
| Low-Power Features | Fast wake-up and energy-saving modes |
Guía de configuración de pines de EFM32G222F64G-E-QFP48 48-pin tqfp, 7 x 7 mm
Configuración de pines para EFM32G222F64G-E-QFP48 (encapsulado 48-pin tqfp, 7 x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para EFM32G222F64G-E-QFP48.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
EFM32G222F64G-E-QFP48 es adecuado para 6 aplicacións: Connected Environmental Sensors, Smart Metering, Industrial Control Module, Portable Medical Sensor Interface, Battery-Powered IoT Node, Secure Data Logger.
Connected Environmental Sensors
The EFM32G222F64G-E-QFP48 is suitable for connected environmental-monitoring nodes because it combines a 32 MHz Cortex-M3 core with 64 kB Flash, 16 kB RAM, and 37 digital I/O pins. Its EFM32 Gecko platform supports fast wake-up and energy-saving modes, helping the node alternate between measurements and low-power waiting. Local preprocessing can reduce wireless traffic, while the integrated AES hardware provides a dedicated resource for protecting collected data. The 1.98 V to 3.8 V supply range also supports compact battery-oriented designs when the sensor and radio use compatible voltage levels.
Recomendado
Smart Metering
The EFM32G222F64G-E-QFP48 can serve as the metering and control MCU in a compact smart meter because it provides 64 kB Flash for application code and 16 kB RAM for buffers and working state. Three 16-bit timers are useful for periodic sampling and timing tasks, while 37 digital I/O pins can support status indicators, sensor inputs, and control outputs. Fast wake-up behavior helps the meter respond promptly without remaining continuously active. Where measurement data must be encrypted before storage or transmission, the device's AES hardware provides a dedicated cryptographic block without requiring a separate security IC.
Recomendado
Industrial Control Module
The EFM32G222F64G-E-QFP48 fits compact industrial control modules that need deterministic embedded processing without a large application processor. Its 32 MHz ARM Cortex-M3 core can execute protocol handling, state logic, and supervisory control, while the three 16-bit timers support repetitive timing, pulse measurement, or output comparison functions. The 37 digital I/O pins provide substantial interface capacity for discrete sensors and actuators. Energy-saving modes can reduce consumption during idle intervals, although the final operating-temperature rating must be verified against the manufacturer documentation for harsh installations.
Recomendado
Portable Medical Sensor Interface
The EFM32G222F64G-E-QFP48 can coordinate sensors and local processing in a portable medical-device interface when its supply voltage, temperature range, and clinical validation meet the application requirements. The 16 kB RAM supports transient data handling, the 64 kB Flash stores application logic, and the 37 digital I/O pins accommodate digital sensors, buttons, indicators, and interface signals. The device's AES hardware supports protected local data handling, although cryptographic use alone does not establish medical certification. Developers must validate signal accuracy, isolation, electrical safety, and regulatory requirements independently for the complete medical system.
Recomendado
Battery-Powered IoT Node
The EFM32G222F64G-E-QFP48 is a practical controller for battery-powered IoT nodes that periodically acquire information and transmit it through a separate radio. Its fast wake-up behavior and energy-saving modes help reduce time spent in an active state, while the 32 MHz Cortex-M3 core provides enough throughput for local protocol logic and data preparation. The 64 kB Flash and 16 kB RAM allow meaningful application functionality on one device. AES hardware can protect local or transmitted information, but final battery life depends on the complete power architecture, radio duty cycle, sensor load, regulator efficiency, and firmware sleep behavior.
Recomendado
Secure Data Logger
The EFM32G222F64G-E-QFP48 can act as the controller for a compact secure data logger that stores local records and manages communications. Its 64 kB Flash supports firmware and limited nonvolatile storage, while 16 kB RAM can hold transient record buffers. The 37 digital I/O pins allow connection of sensors, storage-control signals, status indicators, and communications interfaces. Dedicated AES hardware supports encryption-related workloads while the Cortex-M3 core handles acquisition and record management. For designs requiring extensive log capacity, the flash allocation and external-storage interface requirements must be reviewed before the MCU is finalized.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para EFM32G222F64G-E-QFP48 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | EFM32G222F64-QFP48 |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Package | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP (7 x 7 mm) |
| Core | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory | 64 kB | 64 kB |
| RAM | 16 kB | 16 kB |
| Digital I/O Pins | 37 pins | 37 pins |
| Timers | 3 x 16-bit timers | 3 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
| Cryptographic Hardware | AES | AES |
Diferenciadores clave
- Higher-performance Cortex-M3 platform than the nearby Happy Gecko option (frente a EFM32HG222F64G-QFP48)
- Substantially more volatile memory for working buffers (frente a EFM32HG222F64G-QFP48)
- Identical core and memory architecture in the closest documented replacement (frente a EFM32G222F64-QFP48)
Notas de diseño
Design the supply rail for the listed 1.98 V to 3.8 V operating range and place the required bypass capacitors close to the corresponding power pins. Keep high-current return paths compact and maintain continuous ground references beneath the device. Because the available product information does not specify every capacitor value or tolerance, use the manufacturer reference design and datasheet power-circuit recommendations before releasing the PCB layout.
Follow the TQFP-48 land pattern and exposed-pad or thermal-via arrangement shown in the manufacturer package documentation. Preserve clear access to programming and debug signals, place decoupling before branching traces, and avoid routing fast or noisy external signals beneath sensitive clock or supply nodes. Verify the complete numbered pin table against the intended board revision because peripheral functions can be multiplexed onto the 37 digital I/O pins.
Do not substitute a device merely because it has the same flash size or package. The nearby EFM32HG222F64G-QFP48 has a 25 MHz Cortex-M0+ core and only 8 kB of RAM, compared with the 32 MHz Cortex-M3 and 16 kB RAM in the EFM32G222F64G-E-QFP48. Confirm software timing, memory use, peripheral mapping, AES support, and startup behavior in addition to the mechanical footprint before approving any replacement.
The 32 MHz Cortex-M3 core and fast wake-up behavior can create variable activity levels in a compact 48-pin TQFP assembly. Provide adequate PCB copper for heat spreading, follow the manufacturer's recommended thermal layout, and evaluate the highest expected ambient temperature and active duty cycle. Temperature-rise calculations require confirmed power consumption and board thermal data, so no unverified junction-temperature figure should be assumed.
Información de cumplimiento
Compliance status was not explicitly established for this exact ordering code. The EFM32 Series 1 replacement information states that the family is approaching end of life, with a stated last-order date of 19 November 2026; confirm the target MPN's lifecycle and last-time-buy status through the Request a Quote form.