ICS650R-07 - Low-Jitter Networking Clock Source | Renesas
N.º de pieza: ICS650R-07 ✗ Fin de vidaICS650R-07 Descripción general
A clock synthesizer, also called a PLL clock generator, produces one or more stable frequencies from a single reference crystal. Its position in the signal chain is oscillator or crystal reference to clock synthesizer to digital logic clock distribution. This hierarchy makes the ICS650R-07 useful when a board needs a defined internal clock rather than a free-running digital oscillator, especially in legacy network-interface, storage, controller, and communications equipment.
The primary advantages of the ICS650R-07 are its low cost, low jitter, and high-performance PLL-based frequency generation. Its 14.31818 MHz crystal input supports designs built around the standard parallel-resonant reference commonly associated with communications clock architectures. The 20-SSOP package is compact enough for established peripheral-controller layouts while remaining a surface-mount part suitable for automated assembly. The manufacturer documentation also identifies an ICS650-07B derivative customized for Broadcom applications, indicating a related clock-source family with different ordering and qualification options.
Internally, the device combines analog and digital phase-locked-loop techniques rather than relying on a simple frequency multiplier with free-running outputs. PLL-based synthesis allows the output frequency to be referenced to the external crystal, which supports repeatable clock generation across temperature and supply conditions. Exact operating ranges, frequency tolerances, jitter limits, supply voltage, and output-drive details must be taken from the manufacturer datasheet for the specific ordering code before release qualification.
Typical uses include networking-interface clock trees, system-peripheral controllers, communications modules, and legacy server or storage peripheral boards. It is particularly relevant when the PCB already accepts a 20-SSOP clock-source position and requires a reference-derived peripheral clock. For new designs, engineers should confirm that the crystal frequency, target PLL output, loop-filter configuration, and decoupling requirements match the intended system architecture rather than treating the part as a generic free-running oscillator.
The principal design constraint is that the ICS650R-07 is an older clock-source family rather than a modern low-power clock generator. Its lifecycle, operating-temperature grade, and RoHS status require review for regulated or new-production programs. A legacy board can often retain its existing crystal and PLL component arrangement, but a redesign should compare phase noise, jitter, supply current, maximum frequency, and qualification status against current clock-generator families.
This page organizes the clock-source role, package details, verified catalog information, drop-in family alternatives, and application guidance in one engineering-focused reference. It also distinguishes device functions that can be confirmed from the manufacturer datasheet from parameters that require a full engineering review before schematic release or production qualification.
Alternativas directas para ICS650R-07 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
ICS650-07
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ICS650R-07I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ICS650R-27IT
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ICS650R-07B
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ICS650R-27I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ICS650R-07 Especificaciones
| Device Type | Networking clock source |
| Clock Generation Type | PLL-based clock synthesizer |
| PLL Technique | Analog/digital phase-locked-loop techniques |
| Input Crystal Frequency | 14.31818 MHz |
| Input Crystal Type | Parallel-resonant crystal |
| Jitter Performance | Low jitter |
| Performance Class | High-performance clock synthesizer |
| Cost Class | Low-cost device |
| Encapsulado | 20-SSOP (0.154 in, 3.90 mm width) |
| Recuento de pines | 20 pins |
| Tipo de montaje | Surface mount |
| Primary Function | System-peripheral clock source |
| Application Category | Networking and communications equipment |
| Related Broadcom-Customized Version | ICS650-07B |
| Estado RoHS | Non-compliant |
Guía de configuración de pines de ICS650R-07 20-ssop (0.154 in, 3.90 mm width)
Configuración de pines para ICS650R-07 (encapsulado 20-ssop (0.154 in, 3.90 mm width)). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para ICS650R-07.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ICS650R-07 es adecuado para 6 aplicacións: Networking Interface Clock Tree, System Peripheral Controller Timing, Communications Module Reference Clock, Legacy Storage Controller Support, Broadcom-Customized Network Platform, Industrial Clock-Distribution Backplane.
Networking Interface Clock Tree
The ICS650R-07 fits a legacy networking-interface clock tree where a stable peripheral clock must be derived from a 14.31818 MHz parallel-resonant crystal. Its analog and digital PLL techniques allow the board to generate a defined clock rather than relying on an uncontrolled free-running oscillator. The 20-SSOP format allows reuse of an existing footprint and reduces board-space requirements in densely populated interface cards. During design review, confirm the required output frequency, PLL configuration, loop-filter values, crystal load capacitance, and supply rails against the manufacturer datasheet before releasing a production schematic.
Recomendado
System Peripheral Controller Timing
The ICS650R-07 can supply the reference-derived clock expected by a system-peripheral controller in legacy communications and storage equipment. Because the device accepts a standard 14.31818 MHz parallel-resonant crystal, it is useful where the surrounding circuit was designed around a crystal-referenced PLL rather than an internal RC oscillator. Its low-jitter positioning makes it appropriate for controller timing paths that cannot tolerate excessive cycle-to-cycle variation. Validate the generated frequency, output duty cycle, supply voltage, and startup behavior on the actual board because these operating details are defined in the manufacturer datasheet.
Recomendado
Communications Module Reference Clock
The ICS650R-07 is appropriate for a communications module that needs a deterministic peripheral clock derived from a 14.31818 MHz crystal reference. The PLL-based architecture allows one reference to support internal timing while preserving a compact 20-SSOP footprint. Compared with a simple logic inverter oscillator, the device offers a more structured frequency-generation path that can simplify integration with existing crystal-based designs. Check the module's clock-accuracy budget against the manufacturer jitter specifications, and keep crystal and PLL support components close to the device to avoid additional phase noise and timing uncertainty.
Recomendado
Legacy Storage Controller Support
The ICS650R-07 can support timing functions in legacy storage controllers or peripheral interface cards that were designed around a crystal-referenced clock source. Its 14.31818 MHz parallel-resonant input and PLL-based generation provide a defined timing reference while the 20-SSOP package fits established controller-board layouts. The low-jitter characteristic helps keep the generated clock within the timing assumptions of the surrounding digital logic. Confirm the required output frequency, supply sequencing, and power consumption before adoption, particularly if the board also contains high-speed storage interfaces with separate clock domains.
Recomendado
Broadcom-Customized Network Platform
The related ICS650R-07B is a Broadcom-customized member of the ICS650-07 clock-source family, making it a relevant option for equipment built around a Broadcom-specific network platform. The device retains the low-cost, low-jitter PLL clock-source concept and is associated with the same 20-SSOP format. Use it only where the original platform documentation specifies the customized ordering code. For a generic networking design, confirm the target output, crystal configuration, supply voltage, and qualification conditions in the manufacturer datasheet rather than assuming the customized part is interchangeable in every circuit.
Recomendado
Industrial Clock-Distribution Backplane
The ICS650R-07 can serve as the crystal-referenced timing source in a compact industrial backplane or embedded communications module that retains a 20-SSOP clock-generator position. Its low-cost, low-jitter design is useful where deterministic peripheral timing is required without allocating space for a larger programmable clock device. Because legacy catalog data identifies the part as RoHS non-compliant, regulated industrial programs must review material compliance and consider a modern compliant alternative when required. Confirm operating-temperature limits, output jitter, and supply-current behavior in the manufacturer documentation before approving the design.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ICS650R-07 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ICS650-07 | ICS650R-07I | ICS650R-27IT | ICS650R-07B | ICS650R-27I |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 20-SSOP | 20-SSOP | 20-SSOP | 20-SSOP | 20-SSOP | 20-SSOP |
| Device Type | Networking clock source | Base ICS650 family clock synthesizer | Clock generator | Clock generator | Broadcom clock source | Clock generator |
| Clock Architecture | Analog/digital PLL techniques | PLL clock synthesizer | PLL clock-source family | PLL clock-source family | PLL clock synthesizer | PLL clock-source family |
Diferenciadores clave
- Supports a standard 14.31818 MHz parallel-resonant crystal reference (frente a ICS650R-27IT)
- Provides a general-purpose networking clock-source configuration (frente a ICS650R-07B)
- Combines analog and digital PLL techniques in a low-cost device (frente a ICS650-07)
- Maintains a compact 20-SSOP surface-mount footprint (frente a ICS650R-07I)
Notas de diseño
Place the 14.31818 MHz parallel-resonant crystal, its load-capacitance network, and the PLL support components close to the ICS650R-07 clock pins. Route clock outputs as short, well-referenced traces and keep switching-current return paths away from the crystal network. A stable ground and short supply-return connection reduce supply-induced jitter, so the pin-description table and recommended external-component circuit in the manufacturer datasheet should guide the physical implementation.
Follow the manufacturer decoupling and external-component recommendations exactly, including the required crystal load capacitance and PLL configuration. The ICS650R-07 is a legacy 20-SSOP clock source rather than a modern programmable generator, so its supply voltage and reference configuration are design constraints rather than optional settings. Confirm the operating range, output loading, and startup behavior in the datasheet before assigning a regulator or planning a power-budget reduction.
Do not treat the ICS650R-07, ICS650-07, ICS650R-07I, and ICS650R-27IT as interchangeable without comparing their frequency settings, electrical characteristics, temperature grades, and ordering codes. A 20-SSOP match confirms mechanical compatibility only. The ICS650R-07B is a Broadcom-customized derivative, and the ICS650R-07 is identified as RoHS non-compliant, so both platform configuration and material compliance must be reviewed before substitution.
Información de cumplimiento
Catalog cross-reference information identifies the ICS650R-07 as RoHS non-compliant and indicates that it contains lead. Other compliance attributes are not established by the available product information.