LC4256C-5T176C - 256-Macrocell 5 ns CPLD | Lattice
N.º de pieza: LC4256C-5T176C ✓ ActivoLC4256C-5T176C Descripción general
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines programmable AND/OR logic structures with dedicated input and output blocks. Within the product hierarchy, a CPLD is a programmable logic device, an FPGA alternative, and a semiconductor. Compared with a small fixed-function logic device, a CPLD lets engineers implement control, decoding, state-machine, and interface logic in software before programming the device into a production configuration.
The LC4256C-5T176C provides 256 macro cells and supports in-system programming, allowing configuration behavior to be integrated more flexibly than that of a fixed logic device. Its listed 227 MHz performance figure supports high-clock-rate control logic, while the 5 ns suffix identifies its speed grade. Multiple core-supply options—1.8 V, 2.5 V, and 3.3 V—provide design flexibility for systems using modern low-voltage processors, mixed-voltage interfaces, or legacy industrial logic.
The ispMACH 4000 architecture blends the ispLSI 2000 and ispMACH 4A design approaches, as described in the manufacturer material. The 176-pin package exposes substantially more programmable I/O than small PLD packages, reducing the need for external glue logic and helping consolidate several bus, counter, address-decoding, and peripheral-control functions onto one device. Programming compatibility and configuration details must be checked against the manufacturer datasheet before migrating an existing design.
Typical uses include industrial controller interface logic, data-acquisition systems, instrumentation control, communication-interface bridging, embedded control, and general-purpose glue-logic consolidation. The combination of 256 macro cells and 176 pins is particularly useful when a design needs both moderate logic depth and a large number of individually routed I/O signals. An FPGA can provide greater logic capacity, but the CPLD is often suitable when predictable logic behavior, in-system programmability, and a simpler programmable-logic architecture are priorities.
PCB design should preserve the recommended power and ground distribution, place decoupling capacitors close to the supply pins, and route high-speed clock and control traces with controlled impedance where required. Because the exact pin names, pin numbers, programming interface, and device-specific AC timing are not reproduced in the available product summary, use the manufacturer pinout and timing tables to assign tracks and validate every power, clock, and I/O connection before release to fabrication.
This product record combines the verified device identity, package, macro-cell count, speed grade, supply-voltage options, programming capability, performance figure, and practical drop-in alternatives. It also adds engineering-focused guidance for interface bridging, control-logic consolidation, PCB implementation, and replacement decisions, helping engineers evaluate LC4256C-5T176C before requesting a quote.
Alternativas directas para LC4256C-5T176C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con LC4256C-5T176C (mismo factor de forma y huella) — difiere en Device Type.
LC4256C-5T176I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →LC4256C-5TN176C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LC4256C-5TN176I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LC4256C-75T176C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LC4256ZC-45T176C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LC4256C-5T176C Valores máximos y características eléctricas
| Device Type | Complex programmable logic device (CPLD) |
| Device Family | ispMACH 4000 SuperFAST high-density PLD |
| Macro Cell Count | 256 macro cells |
| Speed Grade | 5 ns |
| Maximum Performance | 227 MHz |
| Core Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Programming | In-system programmable |
| Encapsulado | 176-pin TQFP |
| Recuento de pines | 176 pins |
| Tipo de montaje | Surface mount |
| Logic Architecture | ispMACH 4000 architecture |
| Architecture Heritage | ispLSI 2000 and ispMACH 4A architectures |
| Product Category | Complex programmable logic devices |
Guía de configuración de pines de LC4256C-5T176C 176-pin tqfp
Configuración de pines para LC4256C-5T176C (encapsulado 176-pin tqfp). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para LC4256C-5T176C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
LC4256C-5T176C es adecuado para 6 aplicacións: Industrial Control Logic, Data-Acquisition Interface, Communication Interface Bridging, Embedded System Control, Instrumentation and Test Equipment, General-Purpose Logic Consolidation.
Industrial Control Logic
The LC4256C-5T176C fits industrial control blocks that require programmable decoding, sequencing, and many external signals in one package. Its 256 macro cells provide moderate logic density, while the 176-pin TQFP exposes substantially more connections than a small PLD and reduces the need for separate address-decoder or interlock logic. The 5 ns grade and listed 227 MHz performance make it suitable for deterministic control paths when timing closure permits. Three supported core-supply levels—1.8 V, 2.5 V, and 3.3 V—also simplify mixed-generation controller designs. Before schematic release, verify the exact pin allocation, configuration interface, operating-temperature grade, and I/O timing against the manufacturer datasheet.
Recomendado
Data-Acquisition Interface
The LC4256C-5T176C can consolidate acquisition-system control logic that combines channel selection, timing sequencing, status decoding, and data-routing functions. Its 256 macro cells are suitable for a substantial control block, while the 176-pin package can accommodate numerous acquisition-control, trigger, and peripheral-interface signals. The programmable architecture allows timing and channel maps to be revised without changing a fixed PCB, and the 5 ns grade supports higher-rate control paths where the external interface remains synchronous. Use clean partitioning between clocking, acquisition triggers, and data buses to prevent logic congestion. Validate setup and hold requirements, input thresholds, and supply sequencing in the manufacturer timing documentation.
Recomendado
Communication Interface Bridging
The LC4256C-5T176C is useful for bridging dissimilar communication interfaces when a board needs protocol conversion, command decoding, or handshake logic alongside existing processors. The 256 macro cells support more complex state machines than a basic dual PAL, and the high-pin-count TQFP provides access to parallel data, control, and ready/valid signals. Its in-system-programmable nature simplifies logic revisions and production configuration management. The device should sit between compatible voltage domains only after each interface's supply and signal thresholds have been checked. Isolate high-current or high-speed external lines from logic pins, use controlled clock routing, and validate every protocol timing path at the selected 5 ns speed grade.
Recomendado
Embedded System Control
The LC4256C-5T176C can implement boot sequencing, watchdog logic, interrupt routing, bus arbitration, and peripheral enables around a microcontroller or application processor. Its programmable structure allows reusable control logic to be consolidated without loading the host processor with deterministic low-level tasks. The 176-pin package is useful when the system includes multiple external interfaces, while 256 macro cells provide enough capacity for coordinated control logic. The 1.8 V, 2.5 V, and 3.3 V supply options support integration with processors operating at different logic levels. Keep configuration pins accessible for in-system programming, isolate programming signals from sensitive analog routing, and verify all supply states before beginning board-level programming tests.
Recomendado
Instrumentation and Test Equipment
The LC4256C-5T176C fits instrumentation front ends that require programmable command decoding, measurement sequencing, relay-control logic, and status aggregation. The 256 macro cells and 176 pins allow several instrument functions to share a single programmable-logic device, reducing board area compared with multiple small PLDs. Its 5 ns speed grade can support higher-rate measurement-control paths, while three core-supply options assist mixed-voltage instrument architecture. Separate analog, high-impedance, and digital ground paths in the layout, and place terminations close to the relevant drivers to prevent control signals from disturbing sensitive measurements. Confirm input tolerances and output drive characteristics for every attached instrument interface.
Recomendado
General-Purpose Logic Consolidation
The LC4256C-5T176C is appropriate when a board needs to consolidate counters, decoders, state machines, latches, and interface glue that exceed the capacity of basic GAL or PAL logic. The 256 macro cells provide a practical balance between logic density and deterministic CPLD behavior, while the 176-pin TQFP reduces package count when many discrete-logic functions are present. In-system programming supports revision-friendly designs and simplifies configuration updates during development. Partition unrelated logic groups, preserve a clock budget for each timing domain, and avoid assuming that every package pin is available as user I/O. Use the manufacturer pin table to reserve power, ground, configuration, and clock resources before finalizing the component count and board layout.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para LC4256C-5T176C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | LC4256C-5T176I | LC4256C-5TN176C | LC4256C-5TN176I | LC4256C-75T176C | LC4256ZC-45T176C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 176-pin TQFP | 176-pin TQFP | 176-pin TQFP | 176-pin TQFP | 176-pin TQFP | 176-pin TQFP |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Device Family | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C |
| Speed Grade | 5 ns | 5 ns | 5 ns | 5 ns | 7.5 ns | 4.5 ns |
| Macro Cell Count | 256 macro cells | 256 macro cells | 256 macro cells | 256 macro cells | 256 macro cells | 256 macro cells |
Diferenciadores clave
- Balanced speed and logic capacity (frente a LC4256C-75T176C)
- Exact speed-grade alternative for redesigns (frente a LC4256C-5T176I)
- Higher-performance upgrade path (frente a LC4256ZC-45T176C)
Notas de diseño
Treat the 176-pin TQFP as a high-density programmable-logic footprint with multiple power and ground connections. Place the required bypass capacitors at the nearest suitable supply pins, keep the return path short, and avoid splitting plane regions beneath the device. Assign configuration, clock, and user I/O pins only after cross-checking the complete manufacturer pin-description table, because package-pin count does not equal the number of available user signals.
Separate synchronous clock routing from asynchronous control and configuration signals, and use the manufacturer-recommended clock-input approach for the target speed grade. For 5 ns-class operation, evaluate setup and hold timing with realistic board skew rather than relying only on nominal device delay. Keep programming interfaces away from sensitive clock nets and terminate unused inputs according to the device recommendation.
Do not approve a replacement solely from the T176 package suffix. Compare supply-voltage limits, I/O thresholds, timing tables, configuration pin behavior, temperature grade, and qualification, then confirm that the programming file is accepted by the alternative device. The 5 ns, 7.5 ns, and 4.5 ns grades have different timing margins, so a physically compatible substitution can still change system timing closure.
Información de cumplimiento
The product summaries do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this exact ordering code. AEC-Q100 is treated as not applicable because this is a programmable logic device rather than an automotive-qualified semiconductor designation.