AVISO DE ÚLTIMA COMPRA: LPC2103FHN48 está próximo al fin de vida. Fecha límite de pedido: Contáctenos. Ver piezas alternativas disponibles →
NXP Semiconductors

LPC2103FHN48 - 32KB Flash ARM7 Microcontroller | NXP

N.º de pieza: LPC2103FHN48 ✗ Fin de vida
48-LQFP (7 mm x 7 mm) Package 70 MHz Speed 32 kB Memory
MOQ: 1 |

LPC2103FHN48 Descripción general

The NXP Semiconductors LPC2103FHN48 is a single-chip 16-bit/32-bit ARM7TDMI-S microcontroller with 32 kB of embedded high-speed flash memory, 8 kB of RAM, fast GPIO ports, and a 10-bit ADC. It is packaged in a 48-pin LQFP package measuring 7 mm by 7 mm. The device also includes ISP/IAP capability and supports real-time emulation, making it suitable for embedded control systems that require deterministic peripheral access and in-system programming.

An ARM7TDMI-S microcontroller combines a 32-bit ARM processor core, memory interfaces, interrupt control, and embedded peripherals in a single integrated circuit. Within the semiconductor hierarchy, the LPC2103FHN48 belongs to the microcontroller family of embedded processors, alongside the broader category of integrated circuits. Its combination of embedded flash, SRAM, serial interfaces, timers, and analog conversion supports compact control designs without requiring a separate external memory for program storage.

The key device attributes include an ARM7TDMI-S CPU operating up to 70 MHz, 32 kB of flash, 8 kB of RAM, an 8-channel 10-bit ADC, fast ports, and ISP/IAP support. The 128-bit memory interface and accelerator architecture associated with the LPC2101/02/03 family are intended to improve execution speed, particularly in interrupt routines and DSP-oriented code. The NXP product page identifies the device as archived historical content, so procurement should account for its legacy lifecycle position.

Typical uses include industrial equipment, data acquisition modules, embedded instrumentation, communication controllers, and compact consumer or appliance control boards. The 10-bit ADC supports analog monitoring, while fast GPIO ports suit digital control interfaces and status signaling. ISP/IAP can simplify firmware updates in deployed equipment when the board exposes the required programming signals.

Designers should use the LPC2103 datasheet pin-description and connection tables when assigning the 48 LQFP pins. Power, decoupling, clock, reset, and programming interfaces should follow the manufacturer’s reference guidance. Firmware replacement must also account for the legacy Arm7TDMI-S toolchain and memory map rather than assuming compatibility with newer Cortex-M devices.

This product record combines manufacturer product information, distributor listing details, archived lifecycle context, and engineering guidance for legacy embedded-system maintenance. It distinguishes genuine package-compatible alternatives from cross-family devices that require board changes, and it highlights the importance of validating flash size, RAM, clocking, ADC functions, and firmware tool support before replacement.

Alternativas directas para LPC2103FHN48 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LPC2103FHN48 (mismo factor de forma y huella) — difiere en Package, Product Type, ADC Resolution, Programming Support, Memory Interface Width.

NXP Semiconductors
Package: 48-HVQFN, 7 x 7 mm
Product Type: 32-bit ARM7TDMI-S microcontroller
ADC Resolution: 10 bits
Comparar con LPC2103FHN48 →
NXP Semiconductors
Package: 48-LQFP (7 x 7 mm)
Product Type: 16-bit/32-bit single-chip ARM microcontroller
ADC Resolution: 10 bits
Comparar con LPC2103FHN48 →

LPC2103FBD48EL

✅ Sustitución directa
NXP Semiconductors
📦 48-LQFP (7 mm x 7 mm)
16-bit/32-bit single-chip ARM microcontroller · ARM7TDMI-S · 70 MHz · 32 KB flash (32K x 8) · 8 KB · 10 bits · 8-channel 10-bit SAR · 1.65 V to 1.95 V

Consulte el precio

Ver hoja de datos →

LPC2103FBD48,118

✅ Sustitución directa
📦 48-LQFP (7 mm x 7 mm)
Same 48-LQFP package and LPC2103 family; packing suffix and exact configuration require verification

📋 Alternativa de referencia (no en el catálogo)

LPC2103FHN48 Valores máximos y características eléctricas

Product Type Single-chip 16-bit/32-bit ARM microcontroller
CPU Core ARM7TDMI-S
Maximum CPU Frequency 70 MHz
Embedded Flash Memory 32 kB
SRAM 8 kB
ADC Resolution 10 bit
ADC Channel Count 8 channels
Programming Support ISP/IAP
Emulation Support Real-time emulation
Memory Interface Width 128 bit
GPIO Type Fast ports
Encapsulado 48-LQFP (7 mm x 7 mm)
Tipo de montaje Surface mount
Recuento de pines 48 pins

Guía de configuración de pines de LPC2103FHN48 48-lqfp (7 mm x 7 mm)

Configuración de pines para LPC2103FHN48 (encapsulado 48-lqfp (7 mm x 7 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 48-lqfp (7 mm x 7 mm) para LPC2103FHN48

No hay datos detallados de patillaje disponibles para LPC2103FHN48.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LPC2103FHN48 es adecuado para 6 aplicacións: Industrial Equipment Control, Data Acquisition Module, Embedded Communication Controller, Legacy Instrumentation Controller, Appliance and User Interface Control, Equipment Maintenance Controller.

🏭

Industrial Equipment Control

The LPC2103FHN48 fits compact industrial control boards that require deterministic local logic, digital interfaces, and analog monitoring without a separate processor and ADC. Its ARM7TDMI-S core operates up to 70 MHz, while 32 kB of embedded flash holds application firmware and 8 kB of RAM supports working variables and peripheral buffers. The eight-channel, 10-bit ADC can supervise pressure, temperature, level, or analog position inputs. Its 48-LQFP package also exposes enough I/O for sensors, relays, indicators, and communications. Firmware should use deadline-aware control routines and validate ADC settling behavior in the manufacturer datasheet.

📊

Data Acquisition Module

The LPC2103FHN48 is appropriate for a distributed data-acquisition module because its 8-channel, 10-bit ADC can digitize several analog inputs while the ARM7 processor performs scaling, filtering, and status handling. The 32 kB flash capacity supports firmware for calibration tables and conversion routines, while 8 kB of RAM accommodates bounded sample buffers. At up to 70 MHz, the core can service communications and interrupts alongside acquisition tasks. Designers should establish an acquisition cadence that avoids blocking loops, protect timing-sensitive routines with suitable priority handling, and confirm analog input multiplexing limits from the NXP datasheet.

🌐

Embedded Communication Controller

The LPC2103FHN48 can serve as the central controller in a legacy communication appliance because it combines an ARM7TDMI-S processor, fast GPIO ports, embedded program memory, and multiple serial peripherals within one 48-LQFP device. At frequencies up to 70 MHz, it can handle protocol processing, framing, and host-interface tasks while 8 kB of RAM supports short message buffers. The design must reserve pins and firmware space for the required UART, SPI, CAN, or other interfaces present in the LPC2101/02/03 family. Brownout, reset, clock stability, and line termination should be verified against the manufacturer guidance.

🖥️

Legacy Instrumentation Controller

The LPC2103FHN48 is a practical fit for legacy test and measurement instruments where an existing Arm7-based controller board must be serviced rather than redesigned. Its 32 kB flash and 8 kB RAM are sufficient for embedded control firmware when the original software is modest, while the 10-bit ADC can handle basic analog monitoring. Fast GPIO ports support front-panel status, triggers, relays, and digital sensor interfaces. The key qualification task is reproducing the original clock, reset, and programming arrangement so that the same bootloader and peripheral assumptions remain valid. Firmware updates should use ISP/IAP or the established debug path.

🔧

Appliance and User Interface Control

The LPC2103FHN48 can control keypad matrices, indicators, small displays, and discrete actuators in a legacy appliance or access-control panel. Its fast GPIO ports simplify deterministic button scanning and output switching, while the 10-bit ADC can monitor analog controls or diagnostic inputs. The processor executes up to 70 MHz and the 8 kB SRAM supports display refresh, input debouncing, and communication buffers without requiring external memory. Firmware should use debounce and watchdog strategies appropriate for human-operated equipment. Power sequencing and exposed-pin states should be verified to prevent unintended actuator activation during reset or programming.

⚡

Equipment Maintenance Controller

The LPC2103FHN48 is useful for maintaining older motor-control, heating, or auxiliary equipment that already depends on its Arm7 firmware and peripheral assignments. The 32 kB flash retains control logic, the 8 kB RAM supports state tracking, and the eight-channel 10-bit ADC supports process supervision. Its 48-LQFP package allows a repair board to retain an existing footprint when the exact ordering configuration is compatible. Before substitution, validate startup behavior, watchdog integration, ADC calibration, and safety shutdown paths. The system should also include a controlled recovery method so an interrupted ISP update cannot leave production equipment inoperable.

What is the LPC2103FHN48?
The LPC2103FHN48 is an archived NXP Semiconductors single-chip 16-bit/32-bit ARM7TDMI-S microcontroller with 32 kB of embedded flash, 8 kB of RAM, fast GPIO ports, and an 8-channel 10-bit ADC. According to the NXP product page, it supports ISP/IAP programming and real-time emulation, while distributor information identifies a 70 MHz maximum operating frequency and 48-LQFP package.
What are the key specifications of LPC2103FHN48 that engineers should know?
The LPC2103FHN48 combines an ARM7TDMI-S CPU, 32 kB of embedded flash, 8 kB of RAM, a 10-bit eight-channel ADC, fast GPIO ports, and ISP/IAP programming in a 48-LQFP package. The LPC2101/02/03 family uses a 128-bit memory interface and accelerator architecture to improve execution speed during interrupt service routines and DSP-oriented processing. These characteristics make it an Arm7-era embedded-control device rather than a modern Cortex-M MCU.
Where can I download the LPC2103FHN48 datasheet PDF?
The official LPC2103FHN48 datasheet is linked from the NXP product page at https://www.nxp.com/part/LPC2103FHN48. The NXP page also provides a separate data-sheet PDF for the device. Use the manufacturer document for the authoritative pin description, electrical characteristics, memory map, and connection information, especially because archived NXP pages may no longer be updated.
Where can I find the LPC2103FHN48 pinout?
The LPC2103FHN48 pinout is documented in the manufacturer datasheet rather than in a standalone verified diagram. The device uses a 48-LQFP package, so its 48 physical pins must be assigned from the datasheet’s pin-description table. Confirm power pins, ground pins, ADC inputs, debug signals, crystal connections, and programming pins directly on the NXP datasheet before laying out or modifying a PCB.
Is LPC2103FHN48 suitable for analog measurement and control systems?
Yes, the LPC2103FHN48 is suitable for embedded measurement and control because it integrates an 8-channel, 10-bit ADC alongside an ARM7TDMI-S processor, 32 kB flash, 8 kB RAM, and fast ports. The ADC provides ten-bit measurement resolution, while the processor can perform local filtering, threshold evaluation, and actuator control. The datasheet should be consulted for input limits, sampling behavior, and analog-pin multiplexing.
What can replace the LPC2103FHN48?
The closest verified drop-in candidate is LPC2103FBD48, which uses the same 48-LQFP 7 mm by 7 mm package and is positioned as a close ordering comparison to the LPC2103FHN48. Before using it as a replacement, confirm the exact flash and RAM configuration, clock limits, pin functions, temperature grade, and ordering suffix against the NXP datasheets. No verified cross-brand drop-in replacement was identified.
Is LPC2103FHN48 the same as LPC2103FBD48?
The LPC2103FHN48 and LPC2103FBD48 are closely related NXP LPC2103 devices offered in the same 48-LQFP package, but their complete suffix codes must be decoded before they are treated as identical. The ordering information should be compared for temperature range, lead finish, packing configuration, and other commercial attributes. Firmware and board compatibility must also be validated against the specific device revision and datasheet.
When should I choose LPC2103FHN48 over a newer ARM microcontroller?
Choose the LPC2103FHN48 when maintaining an existing Arm7TDMI-S design requires firmware continuity, established peripheral knowledge, or the same 48-LQFP footprint. It provides 32 kB flash, 8 kB RAM, and an integrated 10-bit ADC for compact embedded control. For a new design, favor a currently supported Cortex-M device when its memory, peripherals, tooling, and supply requirements exceed the legacy MCU’s capabilities.
LPC2103FHN48 vs LPC2103FBD48 - which is better for a legacy 48-LQFP design?
LPC2103FHN48 is the appropriate choice when its exact ordering attributes match the original PCB and firmware requirements; LPC2103FBD48 is a credible package-compatible alternative identified by a direct comparison listing. The deciding factors are the decoded suffix, operating-temperature grade, packing method, and confirmation of electrical and pin compatibility. Because both devices belong to the LPC2103 family, they may preserve board geometry while still requiring controlled qualification.
Is the LPC2103FHN48 still active?
The LPC2103FHN48 is treated as end-of-life because NXP describes its product information as archived content that is no longer updated and is retained for historical reference. Legacy devices can still be valuable for repairing or sustaining older equipment. Procurement teams should request current availability, minimum order quantity, and condition through the Request a Quote form on this page.
Where can I buy LPC2103FHN48 online?
Use the Request a Quote form on this page to request the LPC2103FHN48, current supply status, and lead time. Because the manufacturer classifies the product information as archived, supply may depend on remaining inventory, authorized channels, or qualified sourcing. Request the exact suffix LPC2103FHN48 so the quote is tied to the intended package, grade, and delivery configuration.
What is the price of LPC2103FHN48?
The current commercial terms for LPC2103FHN48 should be obtained through the Request a Quote form on this page rather than from a static price table. Archived status and market availability can cause significant price and lot-to-lot variation, especially for different grades or delivery conditions. Include the required quantity, packaging preference, date code requirements, and target destination in the request.
What is the lead time for LPC2103FHN48?
The current lead time for LPC2103FHN48 must be confirmed through the Request a Quote form on this page because no fixed factory lead time is stated in the archived product information. Lead time may vary with quantity, remaining inventory, traceability requirements, and packaging configuration. For production planning, request both component availability and a committed delivery estimate before releasing the build.
Is LPC2103FHN48 in stock?
Current LPC2103FHN48 stock status should be requested through the Request a Quote form on this page. The manufacturer page is archived, so the listing does not establish present-day inventory. A stock response should specify the exact ordering code, package condition, lot or date code, traceability documents, and available production quantity to support a reliable sourcing decision.
What tools are needed to program an LPC2103FHN48?
The LPC2103FHN48 is programmed through its ISP/IAP capability, but the complete toolchain must support the Arm7TDMI-S target and its memory map. A production system generally needs a compatible JTAG or serial programming interface, target-side boot support, and an Arm7-capable IDE or flash programmer. Confirm connector pinout and supported devices with the programming-tool vendor before assigning production fixtures.

Datos de referencia de ingeniería para LPC2103FHN48 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Select the LPC2103FHN48 when maintaining an existing design requires the exact ordering code, 32 kB flash, 8 kB RAM, eight-channel 10-bit ADC, and 48-LQFP footprint. Its Arm7TDMI-S execution environment is also the safest choice when current firmware, debugger settings, and peripheral assignments depend on the LPC2103 family. Consider LPC2103FBD48 or LPC2103FBD48,118 when the board footprint and major resources match but procurement requires another documented suffix; qualify the decoded temperature, packing, and ordering attributes before substitution. No verified cross-brand drop-in MCU was identified, so Cortex-M, AVR, or other-site-list devices should be treated as redesign candidates rather than direct replacements. For new products, a currently supported MCU with a modern toolchain and lifecycle plan is generally preferable unless maintaining the legacy platform has a clear cost or reliability advantage.

Comparación con alternativas

Parámetro Este producto LPC2103FBD48 LPC2103FBD48,118
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm)
CPU Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
Maximum CPU Frequency 70 MHz 70 MHz 70 MHz
Embedded Flash Memory 32 kB 32 kB 32 kB
RAM 8 kB 8 kB 8 kB
ADC 8-channel, 10-bit ADC 8-channel, 10-bit ADC 8-channel, 10-bit ADC
Programming Support ISP/IAP ISP/IAP ISP/IAP

Diferenciadores clave

  • Direct continuity with the original LPC2103 software environment (frente a LPC2103FBD48)
  • Integrated eight-channel analog conversion (frente a LPC2103FBD48,118)
  • 70 MHz performance for embedded control (frente a LPC2103FBD48)

Notas de diseño

Use the manufacturer power and decoupling recommendations when designing or repairing the 48-LQFP board. Place bypass capacitors adjacent to the applicable supply pins and preserve the documented grounding arrangement. Because an LQFP footprint provides fine-pitch access, inspect solder joints for bridging before attributing erratic ADC readings, boot failures, or communication errors to firmware.

Do not assign the 48 package pins from memory. Review the LPC2103 datasheet pin-description table, especially ADC inputs, debug signals, oscillator connections, reset, and programming pins, because multiplexed functions can change boot behavior. Preserve the original land pattern when qualifying LPC2103FBD48, and verify pin 1 orientation and exposed lead geometry against the package drawing.

Treat an LPC2103-family substitute as a qualified board-level change rather than assuming that a matching package is sufficient. Compare the decoded ordering suffix, temperature grade, clock ceiling, memory configuration, pin multiplexing, and exposed pad requirements. Preserve the original Arm7TDMI-S memory map and validate startup, watchdog, interrupt, ADC, and ISP/IAP behavior before production release.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No explicit compliance declarations were identified in the archived product information or distributor snippets.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LPC2103FHN48 datasheet LPC2103FHN48 pinout LPC2103FHN48 datasheet pdf LPC2103FHN48 replacement LPC2103FHN48 equivalent LPC2103FHN48 vs LPC2103FBD48 LPC2103FHN48 footprint LPC2103FHN48 application circuit LPC2103FHN48 price LPC2103FHN48 stock NXP LPC2103FHN48 LPC2103 48-LQFP pinout

Componentes & términos relacionados

NXP Semiconductors LPC2103FHN48 LPC2103FBD48 LPC2103FBD48,118 ARM7TDMI-S Arm7 microcontroller embedded processor integrated circuit semiconductor 32 kB embedded flash 8 kB SRAM 10-bit ADC 8-channel ADC ISP IAP real-time emulation 128-bit memory interface fast GPIO ports 48-LQFP LQFP package family surface-mount package industrial control data acquisition
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ