NXP Semiconductors

LPC2142FBD64 - 60MHz ARM7 64KB Flash MCU | NXP

N.º de pieza: LPC2142FBD64 ✓ Activo
64-LQFP, 10 x 10 mm Package 60 MHz Speed 64 KB Memory
MOQ: 1 |

LPC2142FBD64 Descripción general

NXP LPC2142FBD64 is a single-chip 16-bit/32-bit ARM7TDMI-S microcontroller operating up to 60 MHz, with 64 KB of embedded flash and 16 KB of SRAM in a 64-LQFP package measuring 10 x 10 mm. The device integrates USB 2.0 full-speed device connectivity, a 10-bit ADC, a 10-bit DAC, In-System Programming, and In-Application Programming.

An ARM7TDMI-S microcontroller is a 32-bit embedded processor that combines an ARM processing core, memory, and peripherals in a single integrated circuit. The LPC2100 family hierarchy places the LPC2142 in the embedded microcontroller segment, where a high-performance CPU, deterministic peripherals, and flexible in-circuit programming support industrial control, communications, and data-acquisition equipment.

The principal characteristics are a 60 MHz ARM7TDMI-S core, 64 KB of program flash, and 16 KB of SRAM. A 128-bit memory interface and accelerator architecture support 32-bit code execution at the maximum clock rate. Real-time emulation and embedded trace support improve debugging visibility, while ISP and IAP simplify firmware programming and field updates.

Integrated USB 2.0 full-speed device support makes the LPC2142FBD64 suitable for USB-connected control, data acquisition, and peripheral products. The on-chip 10-bit ADC and DAC support analog measurement and signal generation without requiring separate converters. Together, these resources allow a compact design to combine acquisition, processing, communications, and control in a single microcontroller package.

Typical uses include industrial data loggers, USB interface controllers, instrumentation, embedded test equipment, communications modules, and control systems. The 60 MHz processing rate and 64 KB flash capacity are well matched to protocol handling, supervisory logic, and mixed analog-digital control. Designs requiring more program storage should be assessed against the larger-memory members of the LPC214x family.

PCB implementation should preserve short analog and digital return paths, route high-current supply connections with adequate copper, and place decoupling capacitors close to the power pins. USB differential routing requires controlled impedance and minimized stub length. Firmware configuration, peripheral clocks, and unused pins should be initialized according to the manufacturer datasheet before production release.

This page combines the manufacturer family data with practical package, programming, interface, and replacement guidance. It distinguishes the exact LPC2142FBD64 configuration from related ordering codes and explains when a higher-memory family member may be appropriate for a redesigned board.

Alternativas directas para LPC2142FBD64 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LPC2142FBD64 (mismo factor de forma y huella) — difiere en ADC Resolution, DAC Resolution, Package, Product Type.

NXP Semiconductors
ADC Resolution: 10 bit
DAC Resolution: 10 bit
Package: 64-LQFP, 10 mm x 10 mm
Comparar con LPC2142FBD64 →

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

LPC2142FBD64 Valores máximos y características eléctricas

Product Type 16-bit/32-bit ARM7 microcontroller
CPU Core ARM7TDMI-S
Maximum CPU Frequency 60 MHz
Embedded Flash Memory 64 KB
SRAM 16 KB
Flash Organization 64K x 8 bits
USB Interface USB 2.0 full-speed device
ADC Resolution 10 bits
DAC Resolution 10 bits
Programming ISP and IAP
Debug Support Real-time emulation and embedded trace
Memory Interface 128 bits
Encapsulado 64-LQFP, 10 x 10 mm
Tipo de montaje Surface mount

Guía de configuración de pines de LPC2142FBD64 64-lqfp, 10 x 10 mm

Configuración de pines para LPC2142FBD64 (encapsulado 64-lqfp, 10 x 10 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 64-lqfp, 10 x 10 mm para LPC2142FBD64

No hay datos detallados de patillaje disponibles para LPC2142FBD64.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LPC2142FBD64 es adecuado para 6 aplicacións: USB Data Acquisition, Industrial Instrumentation, Embedded Control System, USB Communications Module, Programmable Test and Measurement, USB Service Interface.

🖥️

USB Data Acquisition

The LPC2142FBD64 fits compact USB measurement systems because it combines a 60 MHz ARM7TDMI-S core, 16 KB SRAM, a 10-bit ADC, a 10-bit DAC, and a USB 2.0 full-speed device port in one package. The MCU can acquire analog inputs, perform control calculations, and transmit results over the same USB connection without a separate interface controller. A practical design uses analog front-end filtering, the internal converter channels, and a buffered USB implementation. Firmware must handle enumeration, transfer timing, and data buffering, while PCB routing must maintain controlled USB impedance and keep noisy converter paths away from communication signals.

🏭

Industrial Instrumentation

The LPC2142FBD64 is appropriate for compact industrial instruments that combine acquisition, control, and communications. Its 60 MHz ARM7TDMI-S core provides deterministic processing for sensor conditioning, calibration logic, and protocol handling, while 64 KB of flash accommodates embedded firmware and 16 KB of SRAM supports working buffers. The internal 10-bit ADC and DAC reduce board area when the required measurement and output resolution is adequate. Designers should isolate analog inputs, provide stable power filtering, and validate the operating-temperature requirements of the selected ordering code against the equipment enclosure and ambient conditions.

🔧

Embedded Control System

The LPC2142FBD64 can serve as the central controller in a compact embedded system requiring moderate computation, local analog I/O, and serial connectivity. The 60 MHz ARM7 core supports responsive state-machine and communications software, while ISP and IAP permit production programming and controlled firmware upgrades. The 64 KB flash and 16 KB SRAM are suitable for supervisory logic when complex algorithms are kept within the memory budget. Firmware should initialize unused pins and peripherals deliberately, establish a controlled reset and clock configuration, and include watchdog recovery so the controller resumes safely after power or communication faults.

🌐

USB Communications Module

The LPC2142FBD64 fits USB communications modules that combine protocol processing with legacy industrial interfaces. Its USB 2.0 full-speed device capability provides the PC connection, while the ARM7TDMI-S core handles framing, buffering, diagnostics, and device-specific control. The 64 KB flash supports a focused protocol stack, and 16 KB SRAM can hold packet buffers for moderate throughput. A robust implementation should use deterministic buffering, validate USB descriptors against the selected board configuration, and keep crystal, power, and signal-routing requirements consistent with the manufacturer reference design.

⚡

Programmable Test and Measurement

The LPC2142FBD64 is useful in programmable test equipment where USB connectivity, analog measurement, and embedded control must share one processor. The 10-bit ADC supports basic signal observation, the 10-bit DAC supports simple stimulus generation, and the 60 MHz core can sequence measurements and format results for a host computer. Engineer the analog paths for input bandwidth, reference stability, and grounding, and keep the USB interface electrically isolated from high-energy or noisy circuitry. Firmware should include calibration tables, endpoint safeguards, and command validation before laboratory use.

🔌

USB Service Interface

The LPC2142FBD64 can implement a dedicated USB service interface for configuring, monitoring, or updating an industrial appliance. USB 2.0 full-speed operation supports a direct host connection, and ISP/IAP features assist with controlled firmware deployment and maintenance. The 60 MHz processor allows protocol handling and local supervisory functions to coexist, while 16 KB SRAM supports command buffers and diagnostic data. The board should include defined boot behavior, protected firmware boundaries, and dependable power sequencing so a service connection cannot disrupt safety-critical outputs or leave the appliance in an invalid state.

What is the NXP LPC2142FBD64?
The NXP LPC2142FBD64 is a single-chip ARM7TDMI-S microcontroller rated up to 60 MHz, with 64 KB of flash, 16 KB of SRAM, USB 2.0 full-speed device support, and 10-bit ADC and DAC blocks. According to the NXP LPC2141/42/44/46/48 family datasheet, its 64-LQFP package measures 10 x 10 mm and the device supports ISP, IAP, real-time emulation, and embedded trace.
How much flash and SRAM does LPC2142FBD64 have?
The LPC2142FBD64 provides 64 KB of embedded flash memory and 16 KB of SRAM. The flash is organized as 64K x 8 bits, as identified in the NXP family datasheet and product listing. ISP and IAP support allow firmware programming and application-managed updates without relying solely on an external programming interface.
What is the operating frequency of LPC2142FBD64?
The LPC2142FBD64 operates at up to 60 MHz. According to the NXP LPC2141/42/44/46/48 datasheet, a 128-bit memory interface and accelerator architecture allow 32-bit code execution at the maximum clock rate. This makes the device suitable for protocol handling, supervisory control, and mixed acquisition tasks that exceed the needs of small 8-bit controllers.
Does LPC2142FBD64 include USB and analog converters?
Yes, the LPC2142FBD64 includes a USB 2.0 full-speed device interface, a 10-bit ADC, and a 10-bit DAC. The NXP family datasheet identifies these integrated resources, allowing a compact USB instrument or control system to use the same microcontroller for data acquisition, signal generation, communications, and control processing.
Where can I download the LPC2142FBD64 datasheet PDF?
The official LPC2142FBD64 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/LPC2141_42_44_46_48.pdf. Because LPC2142 is one member of the LPC2141/42/44/46/48 family, use the device-specific ordering table and pin description to confirm the exact LPC2142FBD64 configuration.
Where can I find the LPC2142FBD64 pinout?
The LPC2142FBD64 pinout is documented in the pin description and package drawing sections of the official NXP LPC2141/42/44/46/48 datasheet. The device uses a 64-LQFP package with a 10 x 10 mm body. Assign PCB nets directly from the datasheet pin table and verify power, ground, analog, and debug connections before layout release.
Can LPC2142FBD64 be programmed through ISP and IAP?
Yes, the LPC2142FBD64 supports In-System Programming and In-Application Programming. The NXP family datasheet identifies both capabilities, enabling serial firmware loading during production and controlled firmware updates in deployed equipment. Use the documented boot and flash procedures and validate the programmed image on representative hardware before field deployment.
LPC2142FBD64 vs LPC2142FBD64,151 - are they the same device?
LPC2142FBD64 and LPC2142FBD64,151 identify the same base NXP microcontroller configuration in the available product listings, but the suffix can encode ordering and packaging information. The official datasheet ordering table remains authoritative. Treat reel, temperature, and supplier ordering codes separately during procurement rather than assuming every suffix has identical shipment packaging.
When should I choose LPC2142FBD64 over a higher-memory LPC214x part?
Choose LPC2142FBD64 when the application fits within 64 KB of flash and 16 KB of SRAM while still benefiting from a 60 MHz ARM7TDMI-S core and integrated USB. Select a higher-memory member when firmware growth, code libraries, or buffering requirements exceed those resources. This choice should be made before PCB layout because the exact family ordering table must confirm footprint and pin compatibility.
Is LPC2142FBD64 suitable for USB data acquisition?
The LPC2142FBD64 is suitable for compact USB data-acquisition designs because it combines a 60 MHz ARM7TDMI-S core, 16 KB SRAM, a 10-bit ADC, a 10-bit DAC, and USB 2.0 full-speed device connectivity. The design must still include suitable analog conditioning, power filtering, USB impedance-controlled routing, and firmware for enumeration and data transfer.
What is the best drop-in replacement for LPC2142FBD64?
No independently verified drop-in replacement is established for the exact LPC2142FBD64 configuration. The available cross-reference material identifies the original NXP device but does not confirm a different manufacturer part with the same 64-LQFP pinout, ARM7TDMI-S core, 64 KB flash, 16 KB SRAM, and integrated peripherals. Use the Request a Quote form on this page for sourcing and lifecycle support.
What can replace LPC2142FBD64 in an existing design?
A replacement must match the 64-LQFP footprint, pin functions, clock behavior, memory sizes, peripheral mapping, and software model of the LPC2142FBD64. No cross-brand substitute is confirmed by the available technical records, and changing only the flash or RAM capacity can break boot code and peripheral assumptions. For redesigns, qualify a current MCU family and update firmware and board validation together.
Is there an NXP equivalent for LPC2142FBD64?
The LPC2141/42/44/46/48 family contains related NXP devices, but an exact replacement must be selected by the ordering table rather than inferred from the family name alone. The LPC2142FBD64 requires 64 KB flash, 16 KB SRAM, and the specified 64-LQFP pin configuration. Related family members with different memory sizes can require firmware or PCB changes.
Where can I buy LPC2142FBD64 online?
Use the Request a Quote form on this page to request LPC2142FBD64 availability, current lead time, and order handling for the exact base MPN. Confirm whether the required shipment form is the bare LPC2142FBD64 or an ordering-code variant before placing an order, because supplier suffixes can represent different packaging or temperature configurations.
What is the price of LPC2142FBD64?
Current commercial terms for LPC2142FBD64 are obtained through the Request a Quote form on this page. The form supports exact-MPN sourcing, quantity requirements, lead-time confirmation, and shipment-code selection. Avoid treating an archived catalog amount as a current quotation because component pricing, availability, and lifecycle conditions can change independently.
What is the lead time and stock status for LPC2142FBD64?
Request the current LPC2142FBD64 stock status, lead time, and minimum order quantity through the Request a Quote form on this page. Stock should be checked for the exact base MPN and any required ordering suffix separately. For production planning, also request written confirmation of lifecycle status and allocation availability.

Datos de referencia de ingeniería para LPC2142FBD64 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose LPC2142FBD64 for compact embedded designs that need a 60 MHz ARM7TDMI-S controller, 64 KB flash, 16 KB SRAM, USB full-speed device connectivity, and basic ADC/DAC functions. It is particularly suitable for USB instruments, industrial data loggers, embedded controllers, and service interfaces where compactness and integrated connectivity matter. Review related LPC214x members when the design needs more flash, SRAM, or peripheral capacity, but validate the ordering table and software implications rather than assuming footprint compatibility. No independently verified cross-brand drop-in substitute is established for the exact configuration, so a redesign should treat MCU migration, firmware adaptation, and PCB qualification as one engineering effort.

Comparación con alternativas

Parámetro Este producto
Manufacturer NXP Semiconductors
Package 64-LQFP, 10 x 10 mm
CPU Core ARM7TDMI-S
Maximum Frequency 60 MHz
Flash Memory 64 KB
SRAM 16 KB
USB Interface USB 2.0 full-speed device
ADC and DAC 10-bit ADC and 10-bit DAC
Programming ISP and IAP
Debug Support Real-time emulation and embedded trace

Diferenciadores clave

  • Combines USB device connectivity with local analog conversion (frente a No verified drop-in alternative)
  • Balanced performance and memory for embedded control (frente a No verified drop-in alternative)
  • Supports production programming and field updates (frente a No verified drop-in alternative)

Notas de diseño

Use the manufacturer LQFP footprint and pin table when assigning every signal. Place power-decoupling capacitors close to the corresponding supply pins, provide a continuous ground reference, and route clocks away from USB and analog inputs. Confirm exposed-pad, thermal, and assembly requirements against the exact package drawing before releasing the PCB.

Treat the USB D+ and D- route as a controlled-impedance differential pair with matched length and minimal stubs. Provide a short return path beneath the pair and separate the USB connector interface from switching supplies and analog converters. A common USB controller or PHY reference implementation is preferable to improvising the routing geometry.

Do not assume that an LPC2142 family member is interchangeable merely because it uses the same LQFP body. Verify memory capacity, clock rating, temperature grade, pin functions, and ordering suffix in the NXP ordering information. Because the available cross-reference results do not establish a verified alternative, a software migration or PCB change requires a deliberate qualification effort.

Separate analog and digital supply paths as required by the reference configuration, and fit local filtering close to the MCU rather than relying only on board-wide bulk capacitance. Validate startup, reset, and brownout behavior with the final load and cable arrangement. USB bus states and peripheral transients should be included in the power-integrity review.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was present in the manufacturer and distributor records reviewed.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LPC2142FBD64 datasheet LPC2142FBD64 datasheet pdf LPC2142FBD64 pinout LPC2142FBD64 specifications NXP LPC2142FBD64 LPC2142FBD64 LQFP64 LPC2142FBD64 ARM7TDMI-S LPC2142FBD64 60MHz 64KB LPC2142FBD64 equivalent LPC2142FBD64 replacement LPC2142FBD64 cross reference LPC2142FBD64 price LPC2142FBD64 stock LPC2142FBD64 USB application circuit

Componentes & términos relacionados

NXP Semiconductors LPC2142FBD64 LPC2142FBD64,151 ARM7TDMI-S microcontroller embedded microcontroller single-chip microcontroller semiconductor USB 2.0 full-speed 10-bit ADC 10-bit DAC 64 KB flash 16 KB SRAM 60 MHz In-System Programming In-Application Programming real-time emulation embedded trace 64-LQFP LQFP package family surface mount industrial instrumentation USB data acquisition
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ