LTC2372CUH-16 - 16-Bit 500ksps 8-Ch SAR ADC | Analog Devices
N.º de pieza: LTC2372CUH-16 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $24.5 | $24,50 |
| 10 | $22.05 | $220,50 |
| 100 | $19.6 | $1.960,00 |
| 500 | $17.5 | $8.750,00 |
| 1.000 | $15.75 | $15.750,00 |
LTC2372CUH-16 Descripción general
A SAR ADC is a successive-approximation-register analog-to-digital converter: a type of Nyquist-rate data converter that performs one conversion per sample clock by binary-searching an internal capacitive DAC against the input voltage. SAR ADCs sit in the broader hierarchy of ADC → data converter → mixed-signal IC → semiconductor device, combining precision analog sampling with synchronous digital logic on a single die. Compared with delta-sigma converters, SAR ADCs offer deterministic latency, no pipeline delay, and excellent multi-channel multiplexing behavior, which is exactly why the LTC2372CUH-16 was architected around an 8-to-1 input MUX.
Key features include a fully differential ±VREF input stage (pseudo-differential unipolar and pseudo-differential bipolar inputs are also configurable), an integrated 2.048 V temperature-compensated reference with 20 ppm/°C maximum drift, a single-shot capable reference buffer, and 96 dB SNR. The high-speed SPI-compatible serial interface supports 1.8 V, 2.5 V, 3.3 V and 5 V host logic, and includes a sequencer with 16 steps that can cycle through any subset of the 8 input channels without host intervention.
The combination of 500 ksps throughput, 16-bit resolution, 8-channel MUX, and integrated reference makes the LTC2372CUH-16 a strong fit for multiplexed industrial data acquisition, multi-sensor monitoring, and instrumentation front-ends where several analog signals must be digitized by a single converter. The integrated reference eliminates the need for an external 2.048 V reference IC in space-constrained designs.
A typical design consideration is that the part's INL and SNR are specified with the on-chip reference buffer enabled; bypassing it degrades AC performance, so the reference buffer pin should be driven according to the datasheet's reference circuit. For best 16-bit noise performance, the analog inputs should be driven by a low-impedance, low-noise op-amp front end.
This page synthesizes distributor stock and pricing, drop-in package-compatible alternatives, and practical interface/PCB design notes not found in the manufacturer datasheet alone, organized for engineers evaluating the LTC2372CUH-16 for production designs.
Alternativas directas para LTC2372CUH-16 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con LTC2372CUH-16 (mismo factor de forma y huella) — difiere en Number of Input Channels, Package, Reference Buffer, Resolution, RoHS Status.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
LTC2372IUH-16
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LTC2373CUH-16
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LTC2373IUH-16
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LTC2374CUH-16
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LTC2374IUH-16
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LTC2372CUH-16 Valores máximos y características eléctricas
| Resolución | 16 bit |
| Number of Input Channels | 8 (single-ended/differential, with MUX) |
| Converter Architecture | SAR (Successive Approximation Register) |
| Maximum Sample Rate | 500 ksps |
| Tensión de alimentación | 5 V (single supply) |
| Input Configuration | Fully-differential, pseudo-differential unipolar, pseudo-differential bipolar (software configurable) |
| Signal-to-Noise Ratio (SNR) | 96 dB |
| On-Chip Reference Voltage | 2.048 V |
| Reference Drift | 20 ppm/°C max |
| Reference Buffer | Internal, single-shot capable |
| Digital I/O Logic Levels | 1.8 V / 2.5 V / 3.3 V / 5 V compatible |
| Serial Interface | SPI-compatible (high speed) |
| Channel Sequencer Depth | 16 steps |
| Encapsulado | 32-QFN (5 mm × 5 mm) |
| Package Code (per datasheet) | HVQCCN / 32-lead QFN (UH suffix) |
| Rango de temperatura de funcionamiento | 0 °C to +70 °C (commercial, 'C' grade) |
| Estado RoHS | Compliant (#PBF suffix) |
| Lead-Free | Yes (#PBF suffix) |
Guía de configuración de pines de LTC2372CUH-16 hvqccn / 32-lead qfn (uh suffix)
Configuración de pines para LTC2372CUH-16 (encapsulado hvqccn / 32-lead qfn (uh suffix)). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para LTC2372CUH-16.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
LTC2372CUH-16 es adecuado para 6 aplicacións: Multiplexed Industrial Data Acquisition, Multi-Sensor Monitoring & IoT Edge Nodes, Test & Measurement Instrumentation, Medical Patient Monitoring Front-ends, Power & Energy Monitoring Systems, Audio Bandwidth Signal Capture.
Multiplexed Industrial Data Acquisition
The LTC2372CUH-16 is purpose-built for multiplexed 8-channel data acquisition in industrial systems, where one converter handles multiple analog sensors. Its 500 ksps throughput, 16-bit resolution and 96 dB SNR give 8 channels of high-accuracy digitization from a single 5 V supply. The on-chip 8-to-1 MUX and 16-step sequencer let the host CPU offload channel scanning, while the SPI-compatible interface supports 1.8 V to 5 V logic for direct connection to microcontrollers, FPGAs and industrial processors common in PLC backplanes.
Recomendado
Multi-Sensor Monitoring & IoT Edge Nodes
The LTC2372CUH-16's integrated 8-channel MUX and 2.048 V on-chip reference make it ideal for IoT edge nodes that digitize temperature, pressure, strain and flow sensor arrays. At 500 ksps with 16-bit resolution, the part digitizes up to 8 sensors with 96 dB SNR from a single 5 V rail, and the SPI-compatible interface connects directly to low-voltage IoT MCUs without level shifters. The integrated reference eliminates a dedicated reference IC on the BOM, reducing board space for compact edge modules.
Recomendado
Test & Measurement Instrumentation
Bench-top and ATE test instruments benefit from the LTC2372CUH-16's 500 ksps throughput and 16-bit resolution with 96 dB SNR. The 8-channel MUX lets a single ADC digitize multiple test points - including differential signals from DUTs - while the integrated 2.048 V reference with 20 ppm/°C drift provides the low-drift baseline ATE accuracy demands. The SPI interface runs at logic voltages from 1.8 V to 5 V, so the ADC pairs easily with modern FPGAs and bench DSPs.
Recomendado
Medical Patient Monitoring Front-ends
Multi-parameter patient monitors (ECG, SpO2, temperature, respiration) require simultaneous or sequential digitization of multiple analog channels with high SNR. The LTC2372CUH-16 provides 16-bit / 500 ksps performance with 96 dB SNR, an integrated reference and an 8-to-1 MUX - fitting multi-channel vital-sign front-ends from a single 5 V supply. The 16-step sequencer offloads channel scanning from the host MCU, freeing CPU cycles for DSP and alarm logic.
Recomendado
Power & Energy Monitoring Systems
Power-quality meters, multi-phase energy monitors and battery management front-ends digitize current-sense, temperature and voltage channels sequentially with high accuracy. The LTC2372CUH-16's 8-channel MUX, 16-bit resolution and integrated 2.048 V reference suit multi-channel current/voltage sensing where 500 ksps aggregate throughput is more than sufficient. The single 5 V supply and integrated reference reduce BOM cost in space-constrained smart-meter designs.
Recomendado
Audio Bandwidth Signal Capture
While SAR ADCs do not match dedicated audio converters, the LTC2372CUH-16's 96 dB SNR and 500 ksps sample rate cover audio-bandwidth multi-channel capture up to ~200 kHz per channel. Studio-grade multi-track recorders, vibration/acoustic monitoring and phased-array microphone front-ends can use the 8-channel MUX and 16-bit resolution to digitize multiple audio streams from a single 5 V supply, leveraging the sequencer for deterministic frame timing.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para LTC2372CUH-16 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | LTC2372IUH-16 | LTC2373CUH-16 | LTC2373IUH-16 | LTC2374CUH-16 | LTC2374IUH-16 |
|---|---|---|---|---|---|---|
| Package | 32-QFN (UH), 5x5 mm | 32-QFN (UH), 5x5 mm - same | 32-QFN (UH), 5x5 mm - same | 32-QFN (UH), 5x5 mm - same | 32-QFN (UH), 5x5 mm - same | 32-QFN (UH), 5x5 mm - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 18 bit | 18 bit |
| Max Sample Rate | 500 ksps | 500 ksps | 1 Msps | 1 Msps | 1.6 Msps | 1.6 Msps |
| Number of Input Channels | 8 (with MUX) | 8 (with MUX) | 8 (with MUX) | 8 (with MUX) | 8 (with MUX) | 8 (with MUX) |
| SNR | 96 dB | 96 dB | 96 dB | 96 dB | 98 dB (typ) | 98 dB (typ) |
| Supply Voltage | 5 V single | 5 V single | 5 V single | 5 V single | 5 V single | 5 V single |
| On-Chip Reference | 2.048 V, 20 ppm/°C | 2.048 V, 20 ppm/°C | 2.048 V, 20 ppm/°C | 2.048 V, 20 ppm/°C | 2.048 V, 20 ppm/°C | 2.048 V, 20 ppm/°C |
| Temperature Grade | Commercial (0 °C to +70 °C) | Industrial (-40 °C to +85 °C) | Commercial (0 °C to +70 °C) | Industrial (-40 °C to +85 °C) | Commercial (0 °C to +70 °C) | Industrial (-40 °C to +85 °C) |
Diferenciadores clave
- On-board 2.048 V reference with 20 ppm/°C max drift (frente a LTC2373CUH-16)
- Lowest-speed, lowest-cost pin-compatible member of the LTC2372/73/74 family (frente a LTC2374CUH-16)
- 8-channel low-crosstalk MUX with 16-step hardware sequencer (frente a External 8-to-1 MUX + discrete ADC)
Notas de diseño
The 32-QFN (UH) package has an exposed thermal pad on the bottom that must be soldered to a continuous PCB ground plane to meet AC performance specifications. Place the analog input RC anti-aliasing components as close to the ADC input pins as possible (typically within 3 mm), and route analog and digital ground planes separately under the analog and digital sides of the chip, joining them only at the exposed pad. Keep digital SPI traces away from the analog inputs to avoid digital-switching noise coupling into the ADC sampling capacitors.
The LTC2372CUH-16 operates from a single 5 V analog supply plus a separate digital I/O supply rail that can be 1.8 V, 2.5 V, 3.3 V or 5 V. Bypass the analog AVDD pin with a 10 µF ceramic + 0.1 µF ceramic pair placed within 3 mm of the pin; the digital OVDD pin needs its own 0.1 µF bypass. For best 96 dB SNR, the 5 V analog rail must be low-noise: a linear regulator (e.g., LT3042 or LT1761) feeding AVDD is preferred over a switching regulator directly.
Do not bypass the internal reference buffer: the INL and SNR specifications assume the on-chip reference buffer is enabled. Driving the REFBUF pin incorrectly (e.g., tying it low to disable the buffer) degrades AC performance substantially. Also, the input common-mode range depends on the input mode (fully-differential vs pseudo-differential unipolar/bipolar) - verify the analog input signal stays within the mode-specific common-mode window around VREF/2 to avoid linearity degradation near full-scale.
Drive the analog inputs with a low-impedance, low-noise op-amp front-end (e.g., ADA4945-1 or ADA4807) capable of settling to 16-bit accuracy within the acquisition time (tACQ). Add a 20-50 Ω series resistor at each analog input pin to dampen the kick-back from the ADC's sampling capacitor and isolate the front-end op-amp from capacitive switching transients. Estimate: for the LTC2372CUH-16's tACQ ≈ 250 ns at 500 ksps, a 1 nF sampling capacitor and a 50 Ω series resistor form a ~100 ns RC network that is well within the acquisition window.
Información de cumplimiento
RoHS compliance indicated by #PBF ordering suffix per DigiKey listing 5297595. The 'C' suffix in LTC2372CUH-16 denotes commercial temperature grade (0 °C to +70 °C); for industrial temperature grade (-40 °C to +85 °C) choose the LTC2372IUH-16. No automotive (AEC-Q100) qualified variant - this part targets industrial/consumer/test-and-measurement applications.
