M2GL060-FCS325 - 56.5K Logic Cell FPGA | Microchip
N.º de pieza: M2GL060-FCS325 ✓ ActivoM2GL060-FCS325 Descripción general
An FPGA is a programmable digital semiconductor whose lookup tables, registers, interconnect, and I/O blocks can be configured after manufacture. The M2GL060 belongs to the IGLOO 2 low-density flash FPGA family, which sits within the broader hierarchy of programmable logic devices, FPGAs, and integrated circuits. Flash configuration permits the same device to implement different control, interface, protocol, or signal-processing functions without changing the PCB.
Three headline characteristics define this device: 56,520 logic elements for general-purpose digital implementation, 200 I/O for external connectivity, and a 325-FCBGA package for high-pin-count board integration. Its F speed grade and commercial junction-temperature range of 0 °C to 85 °C distinguish it from related industrial-temperature ordering codes. The manufacturer lists the M2GL060 as in production.
The M2GL060 architecture supports programmable functions described by Microchip as bridging, I/O expansion and conversion, system management, and secure connectivity. This makes it useful where a microcontroller may be too constrained, a fixed-function controller is insufficiently flexible, or a larger FPGA would add unnecessary cost and board area. Configuration by a programmer also allows design revisions and field updates without changing the assembled hardware.
Typical uses include communications interfaces, industrial control modules, medical equipment, defense systems, and aviation electronics. In a bridging design, the FPGA can connect two interfaces while adding protocol conversion or status monitoring. In an I/O expansion design, its 200 I/O can collect discrete signals or route them to another controller. The 11 x 11 mm FCBGA footprint also supports dense systems where a leaded package would be impractical.
Board design requires careful BGA escape routing, decoupling, clocking, configuration handling, and signal-integrity control. Follow the Microchip IGLOO 2 package and pin-description guide when assigning balls, planning power rails, and defining PCB constraints. Treat the device as a mixed-signal and high-density digital component: independent I/O standards must be checked against the selected banks, and power, ground, and configuration connections must follow the manufacturer reference design.
This product page combines the manufacturer device specifications with practical comparison, sourcing, and design guidance. It focuses on the verified M2GL060 configuration, documents the commercial and industrial suffix differences, and helps engineers determine whether a direct replacement is appropriate.
Alternativas directas para M2GL060-FCS325 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
M2GL060-FCS325I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
M2GL060-FCSG325I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
M2GL060-FCS325 Valores máximos y características eléctricas
| Device Type | IGLOO 2 Low-Density Flash FPGA |
| Logic Elements | 56,520 logic elements |
| User I/O Count | 200 I/O |
| Core Supply Voltage | 1.2 V |
| Encapsulado | 325-TFBGA FCBGA |
| Package Name | CS325 |
| Package Dimensions | 11 x 11 mm |
| Speed Grade | F |
| Temperature Grade | Commercial |
| Junction Temperature Range | 0 °C to 85 °C |
| Programming Technology | Flash configuration |
| Product Family | IGLOO 2 |
| Tipo de montaje | Surface mount, ball grid array |
| Ball Count | 325 balls |
| Estado del ciclo de vida | In production |
Guía de configuración de pines de M2GL060-FCS325 11 x 11 mm
Configuración de pines para M2GL060-FCS325 (encapsulado 11 x 11 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para M2GL060-FCS325.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
M2GL060-FCS325 es adecuado para 6 aplicacións: Communications Interface Bridging, Industrial Control and I/O Expansion, Medical Instrument Control, Defense and Avionics Support Logic, Signal Conversion and Data Routing, System Management and Secure Connectivity.
Communications Interface Bridging
The M2GL060-FCS325 fits communications bridging designs that require programmable protocol handling alongside high external connectivity. Its 56,520 logic elements can implement interface state machines, data routing, buffering, and status logic, while 200 I/O provide substantial access to parallel, serial, and control signals. The 1.2 V core supply and flash-programmable architecture allow the same board layout to support product revisions. In a bridge, the FPGA can translate or isolate traffic between two subsystems while adding deterministic monitoring and fault handling. The 325-FCBGA package measures 11 x 11 mm, which supports compact equipment where 200 I/O are required without relying on a larger leaded package.
Recomendado
Industrial Control and I/O Expansion
The M2GL060-FCS325 is suitable for industrial control modules that need extensive discrete I/O, signal conversion, and adaptable control logic. The 200 I/O can connect sensors, actuators, communication transceivers, and status signals, while 56,520 logic elements support state machines, timing, conditioning, and supervisory functions. Because the configuration is stored in flash, product behavior can be revised without relocating the FPGA or changing the board. The commercial ordering code is specified for a 0 °C to 85 °C junction range. Designers should select M2GL060-FCS325I instead when the equipment requires the industrial temperature grade, then verify all bank assignments and power constraints in the Microchip package documentation.
Recomendado
Medical Instrument Control
The M2GL060-FCS325 can serve as the programmable control and connectivity layer in compact medical instruments when its commercial temperature class matches the deployed equipment. The 56,520 logic elements support instrument sequencing, alarm logic, data acquisition control, and interface conversion, while the 200 I/O provide connectivity to sensors, displays, and communication modules. Its flash-programmable nature simplifies lifecycle updates because one board configuration can support multiple product variants. For medical systems that require industrial-temperature operation, the M2GL060-FCS325I preserves the 325-FCBGA footprint and principal capacity values. Validation should still include electrical timing, safety architecture, environmental requirements, and application-specific risk controls rather than relying on FPGA qualification alone.
Recomendado
Defense and Avionics Support Logic
The M2GL060-FCS325 is suitable as configurable support logic in defense and avionics subsystems that require bridging, I/O conversion, and system-management functions. With 56,520 logic elements and 200 I/O, it can coordinate discrete signals, implement redundant status paths, and adapt interfaces to changing system requirements. The 1.2 V core supply is appropriate for modern digital power architectures, while the 11 x 11 mm 325-FCBGA package minimizes board area. The M2GL060-FCS325I is the documented industrial-temperature option in the same package. Actual deployment must be checked against the program-specific environmental, screening, radiation, software, and certification requirements, which are not established by the basic commercial or industrial suffix.
Recomendado
Signal Conversion and Data Routing
The M2GL060-FCS325 is well suited to data-routing and signal-conversion modules because its 200 I/O can support multiple interface widths and its 56,520 logic elements can implement buffering, packing, timing alignment, and format conversion. Engineers can configure one physical platform for several board variants, reducing assembly complexity without sacrificing programmable logic. The flash-based configuration also permits controlled updates through the product's programming process. The F-speed commercial version is appropriate where the junction remains between 0 °C and 85 °C; otherwise, the same-footprint M2GL060-FCS325I provides the documented industrial-grade option. PCB implementation must follow the package guide for ball assignments, bank voltages, and high-density escape routing.
Recomendado
System Management and Secure Connectivity
The M2GL060-FCS325 can implement programmable system-management and secure-connectivity functions around a larger control system. Its 56,520 logic elements support configuration sequencing, health monitoring, access-control logic, and event logging, while 200 I/O permit integration with multiple buses, sensors, and supervisory components. The flash configuration supports deterministic startup behavior and design-specific update paths, and the 325-FCBGA footprint keeps the implementation compact. For equipment that exceeds the commercial 0 °C to 85 °C junction range, M2GL060-FCS325I maintains the same package and capacity. Security functions still require a documented threat model, correct key handling, and verification at the system level rather than treatment of the FPGA alone as a complete security solution.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para M2GL060-FCS325 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | M2GL060-FCS325I | M2GL060-FCSG325I |
|---|---|---|---|
| Package | 325-TFBGA FCBGA, CS325 | 325-TFBGA FCBGA | 325-TFBGA FCBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Logic Elements | 56,520 logic elements | 56,520 logic elements | 56,520 logic elements |
| User I/O | 200 I/O | 200 I/O | 200 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | F | F | G |
| Temperature Grade | Commercial, 0 °C to 85 °C junction | Industrial | Industrial |
| Package Dimensions | 11 x 11 mm | 11 x 11 mm | 11 x 11 mm |
| Programming Technology | Flash configuration | Flash configuration | Flash configuration |
Diferenciadores clave
- Commercial F speed grade with a documented 0 °C to 85 °C junction range (frente a M2GL060-FCS325I)
- Lower speed-grade designation than the G-grade option (frente a M2GL060-FCSG325I)
- High I/O density in a compact surface-mount package (frente a M2GL060-FCS325I)
Notas de diseño
The CS325 package has 325 balls in an 11 x 11 mm footprint, so the PCB must provide dense via-in-pad or microvia escape structures and a compatible surface finish. Follow the Microchip IGLOO 2 Packaging and Pin Descriptions User Guide for the recommended land pattern and ball map. Keep high-speed nets short, provide continuous ground references, and route configuration and clock signals away from noisy switching nodes. Prototype assembly should use a process qualified for the package pitch and ball-map verification should be completed before release.
The M2GL060 uses a 1.2 V core supply, but every ball and bank still requires the voltage, current, sequencing, and decoupling arrangement specified by the Microchip datasheet. Place the required bulk and high-frequency decoupling capacitors close to their associated supply and ground balls, and verify that each power rail meets its ramp and sequencing requirements. Do not infer I/O voltage limits from the 1.2 V core value because programmable I/O banks can use separately specified interface voltages.
Treat configuration, clock, serial I/O, and other high-speed interface balls as a coordinated signal-integrity problem. Use the package guide to preserve bank boundaries and legal voltage combinations, and apply the manufacturer's guidance for clock input, configuration pins, and unused balls. Validate board-level timing and signal margins with the intended configuration and I/O standards. Any conversion from M2GL060-FCS325 to an F or G speed grade should be followed by timing closure and system-level testing rather than relying only on package compatibility.
Información de cumplimiento
The device is listed as in production, but the manufacturer product summary does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than being inferred from general Microchip policies.
