Analog Devices

MAX232CEASE+T - 5V 2/2 RS-232 Transceiver | Analog Devices

N.º de pieza: MAX232CEASE+T ✓ Activo
5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX232CEASE+T Descripción general

The Analog Devices MAX232CEASE+T is a 5 V-powered RS-232 interface transceiver with two transmitters and two receivers, packaged in a 16-pin SOIC. It supports the full RS-232 signal amplitude required for reliable point-to-point serial communication and is specified across the -40°C to +125°C industrial temperature range. The device consolidates both directions of an RS-232 port into one compact interface package.

An RS-232 transceiver is a semiconductor interface device that converts between complementary TTL/CMOS logic levels and bipolar RS-232 signals. Its transmitter section translates low-voltage digital logic into RS-232-level outputs, while its receiver section converts RS-232 inputs back into digital logic. This bridge function belongs to the interface IC hierarchy, where it supports the larger category of wired data-communication and industrial-control systems.

The MAX232CEASE+T provides two transmit channels and two receive channels, allowing two unidirectional serial links to share one package. Its single 5 V supply simplifies system power design, while the integrated level-shifting circuitry removes the need for discrete RS-232 driver and receiver stages. These features make the device suitable for industrial controllers, test equipment, instrumentation, and embedded systems that exchange RS-232 commands or data with peripheral equipment.

The MAX232 family is commonly used where legacy RS-232 connectivity must coexist with modern digital logic. A system microcontroller or programmable logic controller can connect its logic-level pins directly to the transceiver, while the board-level RS-232 connector handles the external cable interface. The two receivers and two transmitters provide flexible channel allocation when one direction carries data and another carries control, status, or handshake signaling.

Designers should account for RS-232 voltage levels, connector pin assignments, and grounding when laying out a board. The IC should be placed near the protection and connector circuitry, with short traces on logic signals and controlled return paths for cable-generated noise. Decoupling capacitance should follow the manufacturer’s recommended application circuit, and unused interface pins should be handled according to the pin-description and unused-pin guidance in the datasheet.

This page combines the device’s principal interface specifications with engineering-oriented selection guidance, application context, package information, and verified drop-in candidates. It is intended to help engineers identify the correct temperature grade, verify board compatibility, and implement a dependable RS-232 interface without confusing package similarity with full electrical equivalence.

Alternativas directas para MAX232CEASE+T — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MAX232CEASE+T (mismo factor de forma y huella) — difiere en Package, Supply Voltage, Interface Standard.

Analog Devices
Package: 16-SOIC
Supply Voltage: +5 V
Interface Standard: EIA/TIA-232E and V.28/V.24
Comparar con MAX232CEASE+T →
Analog Devices
Package: 16-pin SOIC, 3.90 mm width
Supply Voltage: +5 V
Comparar con MAX232CEASE+T →

MAX232CEASE+

✅ Sustitución directa
Analog Devices
📦 16-SOIC
RS-232 transceiver · +5 V · 2/2 · 2 · 2 · EIA/TIA-232E and V.28/V.24 · 16-SOIC · 16 pins

Consulte el precio

Ver hoja de datos →

MAX232ECSE

✅ Sustitución directa
📦 16-SOIC
Same 16-SOIC package and 2/2 RS-232 configuration; the E suffix changes the device grade, with temperature limits requiring verification against the target -40°C to +125°C range.

📋 Alternativa de referencia (no en el catálogo)

MAX232EESE+T

✅ Sustitución directa
Analog Devices
📦 16-SOIC
RS-232 transceiver · 2 · 2 · Full duplex · Up to 120 kbps · +5 V · ±15 kV human body model · EIA/TIA-232E and CCITT V.28

Consulte el precio

Ver hoja de datos →

MAX232CEASE+T Especificaciones

Product Type RS-232 transceiver
Transmitter Count 2
Receiver Count 2
Interface Standard RS-232
Tensión de alimentación 5 V
Rango de temperatura de funcionamiento -40°C to +125°C
Encapsulado 16-pin SOIC
Recuento de pines 16 pins
Tipo de montaje Surface mount

Guía de configuración de pines de MAX232CEASE+T 16-pin soic

Configuración de pines para MAX232CEASE+T (encapsulado 16-pin soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-pin soic para MAX232CEASE+T

No hay datos detallados de patillaje disponibles para MAX232CEASE+T.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX232CEASE+T es adecuado para 6 aplicacións: Industrial Serial Controllers, Test and Measurement Equipment, Embedded Service Interfaces, Instrumentation and Data Acquisition, Communication Port Concentrators, Legacy Equipment Upgrade Systems.

🏭

Industrial Serial Controllers

The MAX232CEASE+T fits industrial controllers that must communicate with legacy RS-232 equipment using a 5 V logic domain. Its two transmitters and two receivers support multiple signal paths, while the -40°C to +125°C operating range accommodates extended-temperature factory environments. Place the transceiver between the controller I/O and the protected connector circuit, using separate return paths and the manufacturer’s recommended bypass network. This arrangement simplifies the board partition compared with using individual driver and receiver packages. The primary design checks are RS-232 logic thresholds, transmission direction, grounding, and the voltage rating of any external protection components.

🖥️

Test and Measurement Equipment

The MAX232CEASE+T is useful in test instruments and laboratory controllers that retain a wired RS-232 command or service interface. Two receivers can collect status or acknowledgment signals, while two transmitters can carry commands and control data. The 16-pin SOIC package is compact enough for control boards with limited area, and the -40°C to +125°C rating supports equipment intended for demanding environments. Engineers should verify that the host logic voltage is compatible with the transceiver and that the RS-232 connector receives appropriate surge and ESD protection.

🔧

Embedded Service Interfaces

The MAX232CEASE+T provides a practical service interface for embedded systems whose local processor does not offer native RS-232 levels. Two bidirectional interface sections can connect diagnostic commands and equipment responses without adding separate driver and receiver packages. The 5 V supply suits systems that already operate from a regulated 5 V rail, while the extended-temperature range broadens the available industrial design envelope. A robust implementation should include connector-side protection, controlled cable returns, and verification that unused or shutdown-related pins are configured according to the manufacturer guidance.

📡

Instrumentation and Data Acquisition

The MAX232CEASE+T can interface laboratory and process instrumentation that uses RS-232 for configuration, logging, or legacy data transfer. Two transmit channels allow separate command and control streams, while two receive channels can carry measurements and acknowledgments. Its -40°C to +125°C specification is useful for instrumentation deployed across wide temperature ranges. Keep the cable-side traces compact, place protection devices near the connector, and route the transceiver ground according to the system’s grounding strategy. Signal-integrity checks should focus on connector return paths and avoiding long unprotected cable-side traces.

🌐

Communication Port Concentrators

The MAX232CEASE+T suits compact port concentrators that need more than one RS-232 channel without using separate driver and receiver ICs. Its two transmitters and two receivers can support concurrent control and data paths, while the 16-pin SOIC keeps the assembly compact. The -40°C to +125°C range supports industrial port concentrators deployed outside controlled office environments. Designers should assign each channel explicitly, confirm whether hardware or software handshaking is required, and test the complete interface across cable lengths and grounding arrangements used by the target equipment.

🔌

Legacy Equipment Upgrade Systems

The MAX232CEASE+T is a practical bridge when modern control electronics must communicate with older RS-232 printers, scanners, controllers, or service equipment. Both logic-level and cable-side connections are consolidated in one 16-pin SOIC package, reducing the number of components needed for a two-channel interface. The extended-temperature specification supports industrial upgrades where ambient conditions exceed typical office ranges. During design-in, verify connector gender, signal polarity, handshake requirements, and grounding against the legacy equipment documentation before applying the +T ordering suffix.

What is the MAX232CEASE+T?
The MAX232CEASE+T is a 5 V-powered RS-232 transceiver containing two transmitters and two receivers in a 16-pin SOIC package. According to the manufacturer datasheet, it is intended for bidirectional RS-232 interfaces between TTL/CMOS-compatible digital equipment and a wired RS-232 port. Its two transmitters support two outbound signal channels, while its two receivers support two inbound channels.
What are the key specifications of MAX232CEASE+T that engineers should know?
The principal MAX232CEASE+T specifications are a 5 V supply, two transmitters, two receivers, full RS-232 operation, a 16-pin SOIC package, and an operating temperature range of -40°C to +125°C. These characteristics make the device suitable for industrial and extended-temperature equipment. The manufacturer datasheet remains the controlling reference for voltage thresholds, data rate, supply current, and protection ratings.
What is the operating temperature range of MAX232CEASE+T?
The MAX232CEASE+T operates from -40°C to +125°C. This extended range allows use in industrial control equipment, test and measurement systems, and other environments outside a typical commercial temperature span. When comparing it with a replacement, verify that both the receiver thresholds and transmitter output levels remain valid across the complete temperature range required by the finished product.
Where can I download the MAX232CEASE+T datasheet PDF?
The MAX232CEASE+T datasheet PDF is available from Analog Devices through the official product-documentation link listed on this page. Use the manufacturer’s MAX232 datasheet to verify the complete 16-pin pinout, recommended application circuit, electrical characteristics, package dimensions, and unused-pin instructions. The document is also the preferred source for any PCB footprint and decoupling decisions.
Where can I find the MAX232CEASE+T pinout?
The MAX232CEASE+T pinout is found in the pin-description table of the manufacturer’s MAX232 datasheet. The device uses a 16-pin SOIC package, but channel names and no-connect details must be assigned from the specific orderable part rather than inferred from another MAX232 variant. Use those pin descriptions when assigning logic inputs, RS-232 outputs, receiver inputs, and supply connections on the PCB.
Can MAX232CEASE+T replace MAX232CEASE+?
The MAX232CEASE+T and MAX232CEASE+ are closely related MAX232 entries with the same 16-pin SOIC interface format, but a production substitution still requires checking the exact temperature grade, pinout, package dimensions, and approved marking. The MAX232CEASE+T is identified as operating from -40°C to +125°C. Confirm the complete ordering information and device status with the manufacturer before releasing a replacement to production.
What is the difference between MAX232CEASE+T and MAX232ECSE?
The MAX232CEASE+T and MAX232ECSE appear in the same MAX232 cross-reference family, but suffix differences can represent changes in operating-temperature grade or qualification. The target is specified as a 5 V, two-transmitter, two-receiver RS-232 device in a 16-pin SOIC with a -40°C to +125°C range. Review the comparison and manufacturer datasheet for each exact suffix before treating the second device as a drop-in replacement.
What can replace MAX232CEASE+T?
A valid replacement for MAX232CEASE+T must combine the same 16-pin SOIC footprint, matching pin assignments, compatible 5 V logic levels, two transmitters, two receivers, and acceptable electrical performance over the required temperature range. MAX232ECSE and MAX232EESE+T are identified as comparison candidates, but each suffix requires validation against the manufacturer datasheet. Pin compatibility alone is not enough to approve a production substitution.
Is MAX232CEASE+T the same as MAX232EESE+T?
The MAX232CEASE+T and MAX232EESE+T are related MAX232 interface devices but should not be assumed to be identical without checking their ordering codes. The target provides two transmitters and two receivers in a 16-pin SOIC and is specified from -40°C to +125°C. Compare supply voltage, logic thresholds, temperature grade, receiver behavior, package dimensions, and lifecycle status for the exact manufacturer part.
When should I choose MAX232CEASE+T over MAX232ECSE?
Choose MAX232CEASE+T when the design needs a 5 V, two-transmitter, two-receiver RS-232 interface in a 16-pin SOIC and requires operation across -40°C to +125°C. Consider MAX232ECSE only after confirming its exact electrical characteristics and qualification match the finished equipment. The most important checks are pinout, logic thresholds, temperature range, and supply-current behavior.
Is MAX232CEASE+T suitable for industrial RS-232 equipment?
The MAX232CEASE+T is suitable for many industrial RS-232 interfaces because it provides two transmitters, two receivers, a 5 V supply, and operation from -40°C to +125°C. It can connect a controller or test instrument to legacy RS-232 equipment while keeping the cable-side interface in one compact package. Final suitability also depends on surge protection, isolation, grounding, and the connector implementation.
How should MAX232CEASE+T be laid out on a PCB?
Place the MAX232CEASE+T close to the RS-232 connector and its protection network to minimize exposed high-voltage signal traces. Keep logic-side connections short, route input and output grounds deliberately, and follow the manufacturer’s recommended bypass-capacitor arrangement. Confirm copper-pad and courtyard dimensions against the 16-pin SOIC drawing before releasing the PCB footprint.
What is the best ADI equivalent for MAX232CEASE+T?
The closest same-manufacturer candidates identified for the MAX232CEASE+T are MAX232ECSE and MAX232EESE+T, both associated with the MAX232 cross-reference family. Neither should be called an automatic drop-in replacement until its 16-pin assignments, supply requirements, electrical limits, and temperature grade are checked. For the closest functional path, retain the MAX232 family and select the suffix that matches the required grade.
Where can I buy MAX232CEASE+T online?
Use the Request a Quote form on this page to ask for MAX232CEASE+T availability, current lead time, and order quantities. The form routes the request to XAIPART without requiring static commercial terms to be repeated in this technical description. Confirm the requested suffix, tape-and-reel packaging, and any date-code or traceability requirements before placing the order.
What is the price and lead time of MAX232CEASE+T?
Current price and lead time for MAX232CEASE+T are handled through the Request a Quote form on this page. Include your required quantity, target delivery date, and packaging preferences in the request. For production planning, also confirm the manufacturer lifecycle status and any notification requirements associated with the MAX232 family.
Is MAX232CEASE+T in stock?
Current stock for MAX232CEASE+T should be confirmed through the Request a Quote form on this page because inventory and lead time can change with demand. State the exact quantity and whether you require tape-and-reel production packaging. If the part is allocated to an active project, include the requested ship date so operations can evaluate fulfillment options.
Does MAX232CEASE+T need external RS-232 level shifters?
The MAX232CEASE+T integrates the transmitters and receivers required to bridge digital logic and RS-232 signals, so separate level-shifting ICs are normally unnecessary. External circuitry may still be required for surge protection, isolation, galvanic separation, connector filtering, or unusually long cables. Use the recommended application circuit in the manufacturer datasheet as the basis for those additions.

Datos de referencia de ingeniería para MAX232CEASE+T — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MAX232CEASE+T when the equipment needs a compact, 5 V-powered RS-232 interface with two transmitters, two receivers, and operation across -40°C to +125°C. It is particularly suitable for industrial controllers, test instruments, embedded service ports, and legacy-equipment interfaces that use a 16-pin SOIC footprint. MAX232CEASE+ is the closest catalog counterpart, but engineers should confirm whether its temperature grade satisfies the finished product. MAX232ECSE and MAX232EESE+T are useful family comparison points, although their suffix-specific electrical and qualification characteristics require datasheet review. For any proposed replacement, verify pinout, 5 V supply requirements, logic thresholds, RS-232 output levels, receiver thresholds, temperature grade, package dimensions, and lifecycle status. A matching package is necessary for PCB reuse but does not by itself establish drop-in compatibility.

Comparación con alternativas

Parámetro Este producto MAX232CEASE+ MAX232ECSE MAX232EESE+T
Package 16-SOIC 16-SOIC - same 16-SOIC - same 16-SOIC - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Pin Count 16 pins 16 pins 16 pins 16 pins

Diferenciadores clave

  • Extended-temperature operation in a compact two-channel interface (frente a MAX232CEASE+)
  • One package provides both RS-232 signal directions (frente a MAX232ECSE)
  • Full-duplex channel capacity for control and data paths (frente a MAX232EESE+T)

Notas de diseño

Place the MAX232CEASE+T close to the RS-232 connector and any surge-protection network. This keeps the cable-side driver and receiver traces short while preserving more board area for logic routing. Confirm the 16-pin SOIC land pattern, paste geometry, and copper clearance against the manufacturer package drawing before PCB release. Route logic-side signals directly to the controlling device without unnecessary stubs or test-point loops.

Follow the manufacturer’s recommended supply-decoupling arrangement and verify capacitor voltage ratings against the 5 V rail and local transient conditions. A short ground return from the device to the system power plane is important because RS-232 driver current returns through the same interface. Confirm startup, supply-current, and logic-level behavior at the minimum and maximum operating temperatures relevant to the product rather than relying only on a nominal-condition check.

RS-232 is a bipolar, unbalanced interface, so grounding and connector implementation strongly affect signal integrity. Connect the cable shield to the chassis or protection ground according to the product’s grounding architecture, and avoid routing sensitive analog signals parallel to unprotected cable-side traces. For long or electrically noisy cables, use qualified protection components and validate command reliability with the intended cable length and peripheral equipment.

Do not substitute an RS-232 transceiver solely because it has a 16-pin SOIC package. Verify pin numbering, input and output directions, supply voltage, logic thresholds, temperature grade, and unused-pin behavior for the exact suffix. The MAX232CEASE+T is specified for -40°C to +125°C; a similarly named commercial-temperature variant may fail thermal requirements. Document the approved manufacturer part number in the BOM to prevent unintended substitutions.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The MAX232 is a wired interface IC and is not an automotive-qualified device. Compliance declarations for the exact MAX232CEASE+T ordering code must be confirmed with Analog Devices before production release.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MAX232CEASE+T datasheet MAX232CEASE+T pinout MAX232CEASE+T datasheet pdf MAX232CEASE+T equivalent MAX232CEASE+T replacement MAX232CEASE+T cross reference MAX232CEASE+T price MAX232CEASE+T stock Analog Devices MAX232CEASE+T MAX232CEASE+T 16-SOIC footprint MAX232CEASE+T industrial RS-232 MAX232CEASE+T vs MAX232ECSE MAX232CEASE+T 5V transceiver MAX232CEASE+T application circuit MAX232CEASE+T lead time

Componentes & términos relacionados

Analog Devices MAX232CEASE+T MAX232CEASE+ MAX232ECSE MAX232EESE+T RS-232 RS-232 transceiver interface IC serial interface line driver line receiver CMOS logic TTL logic 5 V power supply 16-pin SOIC SOIC package family surface-mount package industrial control test and measurement legacy equipment surge protection ESD protection operating temperature range digital signal interface
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ