MAX3232CWE+T - 3V-5.5V 1Mbps RS-232 Transceiver | Analog Devices
N.º de pieza: MAX3232CWE+T ✓ ActivoMAX3232CWE+T Descripción general
An RS-232 transceiver converts logic-level digital signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic levels. The MAX3232CWE+T belongs to the interface IC hierarchy: RS-232 interface transceiver, communications interface IC, and discrete semiconductor. Its dual-transmitter, dual-receiver arrangement supports two serial data channels in a compact package.
The 3.0V to 5.5V supply range allows operation from common 3.3V and 5V system rails. The advertised data-rate capability is up to 1Mbps, making the device suitable for point-to-point serial links, embedded control systems, industrial equipment, and computer peripherals that require true RS-232 signaling. The MAX3232 family uses charge-pump circuitry and external capacitors to generate the bipolar voltage levels required by RS-232 transmitters.
The MAX3232CWE+T is supplied in a 16-pin SOIC package. Its pin-compatible relationship with MAX3232 family devices makes footprint and schematic changes unnecessary when selecting another appropriately qualified member of the family. The manufacturer product page identifies the MAX3232 as a production device and provides the product selection table, data sheet, and list-price information for the family.
The transmitter and receiver arrangement is useful for console ports, service interfaces, configuration links, test equipment, and industrial communication equipment. When implementing the circuit, place the required external charge-pump capacitors close to the associated device pins and route the RS-232 lines away from sensitive analog and clock signals. The host-side logic interface and the external connector both require careful grounding and protection planning.
This page summarizes the manufacturer family information, distributor identification, package details, operating range, and practical RS-232 design considerations. It also distinguishes the MAX3232CWE+T from other MAX3232 package and suffix options that are not necessarily drop-in replacements for every existing design.
For the latest datasheet, lifecycle information, current commercial terms, or a sourcing quotation, use the manufacturer product page and the Request a Quote form on this page. Review the complete pin description and recommended capacitor circuit before releasing a PCB layout.
Alternativas directas para MAX3232CWE+T — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MAX3232CWE+T (mismo factor de forma y huella) — difiere en Package, Maximum Data Rate, Product Type, Supply Voltage Range, External Charge-Pump Capacitors.
MAX3232CWE+
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MAX3232ESE+T
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MAX3232CDW
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MAX3232CWE+T Especificaciones
| Product Type | Dual RS-232 transceiver |
| Number of Transmitters | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps |
| Interface Standard | RS-232 |
| Encapsulado | 16-pin SOIC |
| Package Type | Wide SOIC |
| Tipo de montaje | Surface mount |
| External Charge-Pump Capacitors | Four 0.1uF |
| Transmitter Technology | Dual charge-pump |
| Low-Power Operation | Yes |
| Logic Compatibility | CMOS-compatible logic interface |
| Production Status | Production |
| Tape-and-Reel Packaging | Yes |
| Estado RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Configuración de pines de MAX3232CWE+T
| Pin 1 | C1+ — Charge-pump capacitor connection |
| Pin 2 | C1- — Charge-pump capacitor connection |
| Pin 3 | C2+ — Charge-pump capacitor connection |
| Pin 4 | C2- — Charge-pump capacitor connection |
| Pin 5 | VCC — Positive supply voltage |
| Pin 6 | RIN1 — Receiver input 1 |
| Pin 7 | RIN2 — Receiver input 2 |
| Pin 8 | RIN3 — Receiver input 3 |
| Pin 9 | GND — Ground |
| Pin 10 | TIN3 — Transmitter input 3 |
| Pin 11 | TIN2 — Transmitter input 2 |
| Pin 12 | TIN1 — Transmitter input 1 |
| Pin 13 | T1OUT — Transmitter 1 output |
| Pin 14 | T2OUT — Transmitter 2 output |
| Pin 15 | T3OUT — Transmitter 3 output |
| Pin 16 | VCC — Positive supply voltage |
Aplicaciones típicas
MAX3232CWE+T es adecuado para 6 aplicacións: Embedded Serial Console, Industrial Control Equipment, Point-to-Point Data Link, Test and Measurement Equipment, Computer Peripheral Interface, Remote Configuration Interface.
Embedded Serial Console
The MAX3232CWE+T fits embedded console and service interfaces because it combines two transmitters and two receivers with operation from 3.0V to 5.5V. A common arrangement places the device between a UART and a DB9 or equivalent connector, allowing a 3.3V controller to communicate with a 5V host. Its data-rate capability of up to 1Mbps provides margin for diagnostic transfers and configuration traffic. Place the four 0.1uF charge-pump capacitors close to the IC and keep the charge-pump traces away from clock-sensitive circuitry.
Recomendado
Industrial Control Equipment
The MAX3232CWE+T is appropriate for industrial control equipment that uses legacy RS-232 service ports alongside modern digital control logic. Its 3.0V to 5.5V supply range supports both 3.3V and 5V embedded systems, while two transmit and two receive channels can handle command and status paths. The interface should still be protected with suitable external transient-control devices when exposed to industrial cabling. Validate the selected temperature grade against the ambient and enclosure conditions before production release.
Recomendado
Point-to-Point Data Link
The MAX3232CWE+T can implement a compact point-to-point RS-232 link between two systems that require true bipolar serial signaling. The 1Mbps maximum data rate supports demanding short-distance communication, while the low-power 3.0V to 5.5V operation fits embedded equipment. Two transmitters and two receivers provide flexibility for separate control and data channels. Ground the cable shield and connector according to the system architecture, and verify logic polarity and cable length in the final equipment.
Recomendado
Test and Measurement Equipment
The MAX3232CWE+T can provide a PC-to-instrument RS-232 connection in test, measurement, and calibration equipment. The dual-channel arrangement supports separate receive and transmit paths, and the 3.0V to 5.5V operating range accommodates modern instrument control boards. Up-to-1Mbps operation is more than adequate for many legacy instrument-control protocols. For bench equipment connected to long cables, add appropriate protection and verify ground loops through careful connector and return-path design.
Recomendado
Computer Peripheral Interface
The MAX3232CWE+T is useful for legacy computer peripherals that expose an RS-232 service or configuration connector. It translates between CMOS-compatible host logic and true RS-232 levels without requiring a separate external line-driver and receiver pair. The 16-pin SOIC package supports compact peripheral boards, and the 3.0V to 5.5V range allows operation across common host and peripheral supply levels. Confirm that the peripheral connector wiring matches the transceiver's input and output assignments before production.
Recomendado
Remote Configuration Interface
The MAX3232CWE+T can serve as a remote configuration link in a controller, gateway, or service-oriented enclosure where a maintenance technician connects through RS-232. Two receive channels permit more flexible status monitoring, while two transmit channels support command traffic and confirmations. The device operates from 3.0V to 5.5V and reaches up to 1Mbps for short-distance links. Protect exposed connectors against electrostatic discharge and cable transients, and route the RS-232 traces away from precision analog paths.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MAX3232CWE+T — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MAX3232CWE+ | MAX3232ESE+T | MAX3232CDW |
|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Supply Voltage Range | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V |
| Maximum Data Rate | Up to 1Mbps | Up to 1Mbps | Up to 1Mbps | Up to 1Mbps |
| Number of Transmitters | 2 | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 |
| External Charge-Pump Capacitors | Four 0.1uF | Four 0.1uF | Four 0.1uF | Four 0.1uF |
| Interface Standard | True RS-232 | True RS-232 | True RS-232 | True RS-232 |
Diferenciadores clave
- Maintains the same wide 16-pin SOIC family footprint (frente a MAX3232CWE+)
- Provides a direct family-level replacement path (frente a MAX3232ESE+T)
- Matches the reported primary operating profile (frente a MAX3232CDW)
Notas de diseño
Place the four 0.1uF charge-pump capacitors close to their corresponding MAX3232CWE+T pins, following the exact capacitor values and connection diagram in the manufacturer data sheet. Keep these traces short and avoid routing them beneath or directly beside sensitive analog, crystal, or clock nets. Maintain a continuous ground reference and place the transceiver close to the connector-side protection network when cable transients are possible.
Do not treat the MAX3232CWE+T as a surge-protection device. RS-232 connectors can expose the board to electrostatic discharge and cable-borne transients, so use an appropriate protection strategy at the connector boundary. Also verify that the selected transceiver logic inputs and outputs match the UART signal direction; receiver inputs are not interchangeable with transmitter outputs without reviewing the pin table.
Separate the RS-232 side of the board from sensitive analog circuitry and high-speed digital routes. Use a sensible ground strategy that avoids long return-current paths through analog sections, and connect the connector shield according to the final chassis or enclosure architecture. Verify the exact 16-pin SOIC footprint and pin-one orientation against the PCB library before fabrication.
Información de cumplimiento
The manufacturer product page confirms production status, supply range, data-rate capability, and RS-232 product positioning. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the available product information.