MAX3243IDB - 3/5 RS-232 Transceiver | Texas Instruments
N.º de pieza: MAX3243IDB ✗ Fin de vidaMAX3243IDB Descripción general
An RS-232 transceiver is an interface IC that combines differential line drivers and receivers for point-to-point serial data links. The MAX3243 belongs to the RS-232 interface transceiver family within interface ICs and broader semiconductor signal-processing devices. It translates logic-level signals between a host or controller and external RS-232 equipment, while its driver channels strengthen signals for reliable cable transmission.
Key features include three driver channels, five receiver channels, operation across a 3 V to 5.5 V supply range, and 250 kbps data-rate capability. The ±15 kV human-body-model ESD protection helps improve connector and cable-interface ruggedness. The AutoShutdown feature can reduce supply current to 1 µA when the circuit does not detect a valid signal level, making the device useful in power-conscious embedded systems.
The MAX3243 uses CMOS-compatible logic interfacing to manage three RS-232 transmit channels and five receive channels. A 28-pin SSOP provides a compact surface-mount footprint, while the -40°C to +85°C rating supports industrial equipment. Its combination of multiple channels, low-voltage operation, and automatic shutdown makes it suitable for systems that require more than a single RS-232 port.
Typical applications include industrial serial-port adapters, USB-to-RS-232 interface equipment, data-acquisition controllers, point-of-sale terminals, instrumentation, and embedded systems that exchange command or telemetry data over RS-232 cables. Multiple drivers and receivers also allow one controller to connect to several peripherals when the cable lengths and data rates suit RS-232 operation.
PCB implementation requires careful treatment of RS-232 as a differential, bipolar interface rather than a logic-level net. Place the transceiver close to the connector, maintain the intended ground path, and apply the protection and bypass components recommended by the manufacturer. The AutoShutdown circuit may also require correct external capacitor selection for the intended startup behavior.
This product record consolidates the key electrical ratings, package details, lifecycle information, cross-reference candidates, and practical design guidance needed to evaluate the MAX3243IDB and plan a replacement before committing to a new PCB layout.
Alternativas directas para MAX3243IDB — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MAX3243IDB (mismo factor de forma y huella) — difiere en Supply Voltage Range.
TRS3243IDB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MAX3243CDBR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MAX3243ECAI+
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MAX3243CUA
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MAX3243EUA
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MAX3243IDB Especificaciones
| Technology | RS-232 and CMOS |
| Device Type | Multichannel line driver/receiver transceiver |
| Driver Channel Count | 3 channels |
| Receiver Channel Count | 5 channels |
| Maximum Data Rate | 250 kbps |
| Supply Voltage Range | 3 V to 5.5 V |
| Nominal Supply Voltage | 3.3 V |
| AutoShutdown Supply Current | 1 µA |
| ESD Protection | ±15 kV HBM |
| Rango de temperatura de funcionamiento | -40°C to +85°C |
| Package Type | 28-pin SSOP (DB) |
| Package Dimensions | 5.30 mm |
| Package Code | MO-150 |
| Recuento de pines | 28 pins |
| Tipo de montaje | Surface mount |
| Datasheet Revision | Rev. Q |
| Production Status | No longer in production |
Guía de configuración de pines de MAX3243IDB mo-150
Configuración de pines para MAX3243IDB (encapsulado mo-150). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para MAX3243IDB.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MAX3243IDB es adecuado para 6 aplicacións: Industrial Serial-Port Controllers, USB-to-RS-232 Adapters, Data-Acquisition Instruments, Point-of-Sale Terminals, Embedded Telemetry Systems, Network Equipment Management Ports.
Industrial Serial-Port Controllers
The MAX3243IDB fits industrial controllers that need several RS-232 ports from one logic-level interface. Its three drivers and five receivers support command, status, and telemetry connections, while the 250 kbps data rate is suitable for moderate-speed supervisory links. The -40°C to +85°C operating range is appropriate for factory equipment, while the 3 V to 5.5 V supply supports embedded logic. Use the manufacturer's typical circuit and verify the AutoShutdown capacitor before relying on automatic low-power behavior.
Recomendado
USB-to-RS-232 Adapters
A USB-to-RS-232 adapter can place the MAX3243IDB between a USB controller and an external DB9 or terminal connector. The transceiver converts controller logic levels into RS-232 levels and returns received data through its five receiver channels. Its 250 kbps capability covers legacy serial peripherals without imposing a high-speed cable requirement. The ±15 kV HBM ESD rating improves robustness at accessible connectors, although the final design still needs suitable external protection and a properly implemented signal ground.
Recomendado
Data-Acquisition Instruments
The MAX3243IDB is useful in laboratory and industrial data-acquisition instruments that must exchange commands or sampled results with a host computer. Multiple transmitter channels can support separate reporting paths, while five receiver channels provide flexibility for control signals and multi-instrument bus arrangements. The 250 kbps rate suits configuration and status traffic rather than continuous high-bandwidth transfer. Confirm connector pinouts, grounding, and cable length because RS-232 voltage levels and return paths differ from ordinary TTL signaling.
Recomendado
Point-of-Sale Terminals
Point-of-sale terminals can use the MAX3243IDB to connect a transaction controller to receipt printers, scanners, scales, or service equipment through RS-232. The 3-driver, 5-receiver arrangement allows a controller to manage several peripheral directions on one device, while AutoShutdown supports lower power consumption during idle periods. The 250 kbps rate is more than adequate for typical transaction traffic. Verify peripheral voltage levels, handshake wiring, and connector shielding so that each attached device follows the intended RS-232 topology.
Recomendado
Embedded Telemetry Systems
The MAX3243IDB supports embedded systems that report telemetry to a local console, service unit, or remote modem over RS-232. Three output channels can carry data, status, and alarms, while five input channels can accept commands and equipment feedback. The low-voltage operation aligns with embedded processors, and the 1 µA AutoShutdown current helps reduce consumption when the link is inactive. The -40°C to +85°C rating broadens its suitability for industrial enclosures, provided the enclosure and cable transients are controlled.
Recomendado
Network Equipment Management Ports
MAX3243IDB can support management and diagnostic ports on communication equipment where a dedicated RS-232 console is required. The multiple receiver channels allow the console to share a connector with equipment-control signals, and the three drivers support separate outbound channels. A 250 kbps rate is suitable for terminal sessions, status polling, and configuration commands. Maintain a low-impedance ground return between connected equipment, place ESD protection near the connector, and account for the bipolar RS-232 signal levels when testing the assembled interface.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MAX3243IDB — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | TRS3243IDB | MAX3243CDBR | MAX3243ECAI | MAX3243CUA | MAX3243EUA |
|---|---|---|---|---|---|---|
| Package | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 (DB) | SSOP-28 | SSOP-28 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Driver / Receiver Configuration | 3 drivers / 5 receivers | 3 drivers / 5 receivers | 3 drivers / 5 receivers | 3 drivers / 5 receivers | 3 drivers / 5 receivers | 3 drivers / 5 receivers |
| Maximum Data Rate | 250 kbps | 250 kbps class | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V class | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
Diferenciadores clave
- Wider industrial temperature coverage (frente a MAX3243CDBR)
- Three transmitters and five receivers in one package (frente a TRS3243IDB)
- Low-power automatic shutdown (frente a MAX3243CDBR)
Notas de diseño
Place the MAX3243IDB close to the RS-232 connector and route each driver and receiver trace directly to its corresponding interface node. Keep logic-side signals away from exposed connector and cable paths to limit capacitive coupling. Follow the pin-description table in the manufacturer data sheet for every power, ground, enable, shutdown, and status connection rather than inferring connections from channel direction.
RS-232 drivers intentionally produce bipolar voltage swings and fast edge transitions. Maintain a continuous signal-ground path between the transceiver and connected equipment, and avoid routing the interface next to switching-regulator power loops or high-speed clocks. If an exposed connector is present, place transient-protection components close to the connector while preserving the data-sheet recommendations for line-driver and receiver networks.
Use the manufacturer's recommended supply and bypass-component arrangement for 3 V to 5.5 V operation. The AutoShutdown function can reduce supply current to 1 µA when no valid signal is detected, but its startup timing depends on the external capacitor. Select that value from the typical application circuit and validate repeated power transitions before using automatic shutdown in a safety- or availability-critical system.
Do not treat RS-232 as a single-ended TTL interface or substitute a 5 V logic-level transceiver directly for this bipolar interface. Confirm the DB package, all 28 pin assignments, channel direction, shutdown behavior, and status outputs before replacing MAX3243IDB. Also verify the connected equipment's voltage levels and ground arrangement because an apparently compatible pinout does not guarantee an interoperable cable connection.
Información de cumplimiento
The device is specified with ±15 kV HBM ESD protection. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code and shipment.