MAX4853ETE - Quad SPST Over-Rail Switch | Analog Devices
N.º de pieza: MAX4853ETE ✓ ActivoMAX4853ETE Descripción general
An analog switch is an integrated semiconductor device that connects or discloses signal paths under digital control. In the product hierarchy, MAX4853ETE is an analog switch, also described as a multiplexer or switch IC, and belongs to the broader interface-IC and signal-routing categories. Unlike a mechanical relay, it changes signal paths electronically without moving physical contacts; unlike a simple transistor switch, it can support controlled, bidirectional analog routing and over-rail signal-handling functions.
The primary feature of the MAX4853ETE is its quad SPST organization. Four independently controlled switches can route four separate analog signals, reducing the component count in test, measurement, communication, and signal-routing systems. Its over-rail signal-handling characteristic allows the switch to be evaluated for applications where the controlled signal may extend beyond the nominal supply rail. The TQFN-16 exposed-pad package supports compact surface-mount layouts while providing a thermal path through the exposed pad.
The MAX4853, MAX4851, and MAX4851H appear together in the verified family description, but the extracts do not provide enough electrical detail to claim that those devices are electrically or pin compatible with MAX4853ETE. In particular, contact configuration, supply topology, control logic, on-resistance, signal range, and absolute maximum ratings must be compared before substitution. The verified search results describe the MAX4853 family as having 3.5/7 dual-supply, quad-SPST over-rail functionality, but the corrupted characters in that snippet prevent safe extraction of further conditions.
Typical uses for this device include analog test-point selection, signal-routing in instrumentation, multiplexing between external circuits and a shared analog-processing chain, and controlled connectivity in communications or industrial electronics. A practical design would use the control pins from a microcontroller or logic device, connect the exposed pad to the PCB ground or thermal plane as specified by the datasheet, and provide clean supply bypassing close to the package. Logic levels and timing must be checked against the exact operating supply.
The primary design consideration is signal integrity. Because the supplied extracts do not provide verified bandwidth, charge injection, off isolation, on resistance, or capacitance values, engineers should not size termination or filtering from assumptions. Consult the MAX4853 manufacturer datasheet for the complete electrical characteristics, recommended operating conditions, truth tables, and application information. Also verify the exposed-pad connection and reflow profile for the specific TQFN-16-EP package.
This product page separates what is confirmed by the supplied search evidence from parameters that remain unverified. It combines the confirmed quad-SPST function, over-rail feature, and TQFN-16-EP package with explicit data gaps, avoiding invented pricing, ratings, pin assignments, or replacement claims. That distinction is particularly important for analog switches, where apparently similar parts can differ in signal range, control thresholds, and channel behavior.
Alternativas directas para MAX4853ETE — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasMAX4853ETE Valores máximos y características eléctricas
| Product Type | Quad SPST analog switch |
| Number of Switches | 4 switches |
| Switch Configuration | SPST |
| Signal Handling Feature | Over-rail signal handling |
| Encapsulado | TQFN-16-EP |
| Total Pin Count | 16 pins |
| Tipo de montaje | Surface mount |
| Manufacturer Family Description | 3.5/7 Quad SPST switches with over-rail signal handling |
Guía de configuración de pines de MAX4853ETE tqfn-16-ep
Configuración de pines para MAX4853ETE (encapsulado tqfn-16-ep). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para MAX4853ETE.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MAX4853ETE es adecuado para 6 aplicacións: Analog Test-Point Selection, Precision Signal Multiplexing, Industrial Communication Routing, Data-Acquisition Front End, Battery-Powered Measurement Device, Interface Isolation and Switching.
Analog Test-Point Selection
The MAX4853ETE can reduce the number of discrete routing elements in an instrumentation board by providing four SPST paths for selecting test nodes. Its verified over-rail signal-handling feature makes it a candidate for mixed-voltage test systems, but the permitted signal range must come from the manufacturer data. Engineers should compare the switch's verified on resistance, leakage, bandwidth, and capacitance with the accuracy budget of the measurement path. The logic interface must also operate from a compatible voltage level, and the TQFN-16-EP exposed pad should follow the package guidance.
Recomendado
Precision Signal Multiplexing
Four SPST channels allow the MAX4853ETE to multiplex several analog inputs into a shared processing chain, reducing connector count and PCB routing complexity. The supplied evidence confirms the quad-SPST topology and over-rail feature, while detailed insertion loss, bandwidth, charge injection, and isolation values remain unverified. A practical implementation must therefore include signal-source impedance, sampling speed, capacitance, and crosstalk in the error analysis. The control timing and exposed-pad connection should be implemented only after checking the complete manufacturer datasheet.
Recomendado
Industrial Communication Routing
The MAX4853ETE can serve as a signal-routing element in industrial communication equipment when several external lines must be connected selectively to an internal interface. Its four SPST switches provide a compact routing solution, and the over-rail characteristic may be useful when signal levels exceed a nominal rail. However, the verified data does not establish transient immunity, bandwidth, or maximum switching current, so protection and filtering cannot be sized from these search extracts. Validate the complete signal path against industrial EMC and grounding requirements before production release.
Recomendado
Data-Acquisition Front End
A data-acquisition front end can use the MAX4853ETE to route sensor or source signals toward a shared analog-to-digital conversion chain. The four SPST paths may reduce the number of required input multiplexers and connector pins, while the over-rail feature can accommodate source signals outside the nominal switch supply under documented conditions. Accurate acquisition still depends on verified switch resistance, leakage, bandwidth, and charge injection, none of which are supplied in the current data. These parameters must be checked against resolution, settling-time, source-impedance, and sampling-rate requirements.
Recomendado
Battery-Powered Measurement Device
The MAX4853ETE can support signal selection in a portable or battery-powered measurement device where four controlled analog paths are required in a compact surface-mount footprint. The TQFN-16-EP package helps minimize board area, while the exposed pad can provide thermal dissipation where required. Designers still need to verify supply-voltage compatibility, control-logic levels, switching time, and leakage before assigning it to a low-power signal chain. Power-consumption calculations should include the device's quiescent current and switched-node behavior once those manufacturer values are available.
Recomendado
Interface Isolation and Switching
The MAX4853ETE may be used to isolate or connect external analog nodes in a mixed-signal interface where a physical SPST topology is required. Its over-rail signal handling can simplify connections when external amplitudes exceed the nominal operating rail, but only within the manufacturer's absolute and recommended limits. The application must account for off leakage, on resistance, isolation, and possible charge injection during control transitions. PCB layout should provide a continuous return path, keep sensitive routes away from switching-node copper, and follow the exposed-pad land pattern.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MAX4853ETE — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Diferenciadores clave
- Four SPST channels in one package (frente a MAX4851)
- Documented over-rail signal handling (frente a Generic quad analog switch)
- Compact exposed-pad mounting (frente a Lead-frame quad SPST switch)
Notas de diseño
Do not finalize the signal-path budget until the manufacturer data for on resistance, off leakage, bandwidth, capacitance, isolation, and charge injection is available. These parameters determine insertion error, crosstalk, settling time, and switching transients. Include source impedance, load capacitance, cable or connector capacitance, and the selected control timing in the analysis. The verified search extracts confirm the quad-SPST and over-rail features but do not provide the numerical values needed for a quantitative integrity calculation.
Follow the exact TQFN-16-EP land pattern and exposed-pad connection shown in the manufacturer package drawing. Place supply bypass capacitors close to the relevant package pins, provide a low-impedance ground reference, and route controlled signals away from high-energy or fast-switching nets. Do not assume that the exposed pad is interchangeable between functional revisions. Confirm pin numbering, pad dimensions, solder-mask geometry, and the recommended reflow profile before releasing artwork.
The main substitution pitfall is treating the MAX4851, MAX4851H, and MAX4853 family references as automatically pin compatible. A valid drop-in candidate must match the TQFN-16-EP footprint, terminal assignments, control polarity, supply range, over-rail limits, and key electrical characteristics. The supplied cross-reference data names search tools but does not identify a qualified replacement, so engineers should avoid approving a substitute solely from its family name or package. Request the current manufacturer datasheets and compare the absolute maximum and recommended operating tables.
Información de cumplimiento
The supplied web extracts do not contain explicit environmental or regulatory compliance statements. Compliance must be confirmed from the current manufacturer product page or material declaration.
