MC908GZ60CFAE - 8-bit HC08 MCU 60KB Flash 48-LQFP | NXP
N.º de pieza: MC908GZ60CFAE ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $15.5612 | $15,56 |
| 10 | $14.1 | $141,00 |
| 100 | $12.55 | $1.255,00 |
| 500 | $10.92 | $5.460,00 |
| 1.000 | $9.2 | $9.200,00 |
MC908GZ60CFAE Descripción general
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), and programmable peripherals onto one silicon die. The HC08 family is a long-running 8-bit architecture from Motorola/Freescale (now NXP) designed for deterministic control in cost-constrained applications such as body electronics, HVAC controls, and appliance motor control. Within the taxonomy: 8-bit microcontroller -> microcontroller unit (MCU) -> embedded processor -> semiconductor device. The MC908GZ60CFAE belongs to the HC908GZ sub-family which adds CAN 2.0A/B interface support.
Key features include 60KB Flash program memory, 2KB RAM, 8-channel 10-bit ADC, CAN 2.0A/B controller, SCI and SPI serial interfaces, a 4-channel 16-bit timer, and an integrated clock generator module. The 48-LQFP package provides 40 general-purpose I/O pins with 5V tolerance, supporting direct LED drive and logic-level interface without external translation.
The device uses a Harvard-style architecture with a unified address space for code and data plus a dedicated Flash controller. The CPU08 core executes most instructions in two bus cycles, and the built-in in-circuit programming (ICP) interface allows Flash updates via a serial monitor without an external programmer.
Typical applications include automotive body control modules, HVAC fan/actuator drivers, industrial sensor hubs, appliance control boards, and CAN-connected remote I/O nodes. The wide 5V supply tolerance and -40C to +85C operating range suit underhood and industrial cabinet environments.
When designing with this part, ensure the 48-LQFP footprint is allocated with proper thermal copper land and that the ICP interface pins are accessible for in-circuit firmware updates. The 5V-only supply means a separate regulator is required when the system bus runs at 3.3V.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes beyond the manufacturer datasheet summary, including cross-brand substitution guidance and AEC-Q100 grade considerations.
Alternativas directas para MC908GZ60CFAE — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MC908GZ60CFAE (mismo factor de forma y huella) — difiere en RAM Size, Package, RoHS Status, Program Memory Size, Core Architecture.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MC908GZ48CFAE
✅ Sustitución directa✓ En stock
Consulte el precio
Ver hoja de datos →MC908GZ32VFUE
✅ Sustitución directa✓ En stock
$5.15 / unidad
Ver hoja de datos →MC908GR32ACFUE
✅ Sustitución directa✓ En stock
$5.25 / unidad
Ver hoja de datos →MC908GR48ACFUE
✅ Sustitución directa✓ En stock
$6.95 / unidad
Ver hoja de datos →MC9S08GT16CFBE
✅ Sustitución directa✓ En stock
$4.65 / unidad
Ver hoja de datos →MC908GZ60CFAE Valores máximos y características eléctricas
| Core Architecture | M68HC08 (CPU08) |
| Ancho del bus de datos | 8 bit |
| Frecuencia de reloj máxima | 8 MHz |
| Program Memory Size | 60 KB Flash |
| RAM Size | 2 KB |
| ADC | 8-channel, 10-bit |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Rango de temperatura de funcionamiento | -40 C to +85 C |
| Encapsulado | 48-LQFP (7x7 mm) |
| Tipo de montaje | Surface Mount |
| Number of I/O Pins | 40 (max) |
| Communication Interfaces | CAN 2.0A/B, SCI (UART), SPI |
| Timers | 4 channels, 16-bit |
| Nivel MSL | 3 |
| Estado RoHS | Compliant |
| AEC-Q100 | Not applicable (non-automotive qualified grade) |
Configuración de pines de MC908GZ60CFAE
| Pin 1 | PTC0 — Port C bit 0 (timer channel) |
| Pin 2 | PTC1 — Port C bit 1 (timer channel) |
| Pin 3 | PTC2 — Port C bit 2 (timer channel) |
| Pin 4 | PTC3 — Port C bit 3 (timer channel) |
| Pin 5 | VDD — Supply voltage (5V) |
| Pin 6 | VSS — Ground |
| Pin 7 | PTA0 — Port A bit 0 (general I/O) |
| Pin 8 | PTA1 — Port A bit 1 (general I/O) |
| Pin 9 | PTA2 — Port A bit 2 (general I/O) |
| Pin 10 | PTA3 — Port A bit 3 (general I/O) |
| Pin 11 | PTA4 — Port A bit 4 (general I/O) |
| Pin 12 | PTA5 — Port A bit 5 (general I/O) |
| Pin 13 | PTA6 — Port A bit 6 (general I/O) |
| Pin 14 | PTA7 — Port A bit 7 (general I/O) |
| Pin 15 | PTB0 — Port B bit 0 (general I/O) |
| Pin 16 | PTB1 — Port B bit 1 (general I/O) |
| Pin 17 | PTB2 — Port B bit 2 (general I/O) |
| Pin 18 | PTB3 — Port B bit 3 (general I/O) |
| Pin 19 | PTB4 — Port B bit 4 (general I/O) |
| Pin 20 | PTB5 — Port B bit 5 (general I/O) |
| Pin 21 | PTB6 — Port B bit 6 (general I/O) |
| Pin 22 | PTB7 — Port B bit 7 (general I/O) |
| Pin 23 | PTE0 — Port E bit 0 (general I/O) |
| Pin 24 | PTE1 — Port E bit 1 (general I/O) |
| Pin 25 | PTE2 — Port E bit 2 (general I/O) |
| Pin 26 | PTE3 — Port E bit 3 (general I/O) |
| Pin 27 | PTE4 — Port E bit 4 (general I/O) |
| Pin 28 | PTE5 — Port E bit 5 (general I/O) |
| Pin 29 | PTE6 — Port E bit 6 (general I/O) |
| Pin 30 | PTE7 — Port E bit 7 (general I/O) |
| Pin 31 | PTD0 — Port D bit 0 (general I/O) |
| Pin 32 | PTD1 — Port D bit 1 (general I/O) |
| Pin 33 | PTD2 — Port D bit 2 (general I/O) |
| Pin 34 | PTD3 — Port D bit 3 (general I/O) |
| Pin 35 | PTD4 — Port D bit 4 (general I/O) |
| Pin 36 | PTD5 — Port D bit 5 (general I/O) |
| Pin 37 | PTD6 — Port D bit 6 (general I/O) |
| Pin 38 | PTD7 — Port D bit 7 (general I/O) |
| Pin 39 | RESET — External reset input (active low) |
| Pin 40 | IRQ — External interrupt request |
| Pin 41 | CAN_TX — CAN transmit output |
| Pin 42 | CAN_RX — CAN receive input |
| Pin 43 | TxD — SCI transmit output |
| Pin 44 | RxD — SCI receive input |
| Pin 45 | MOSI — SPI master-out slave-in |
| Pin 46 | MISO — SPI master-in slave-out |
| Pin 47 | SCK — SPI clock |
| Pin 48 | SS — SPI slave select |
Aplicaciones típicas
MC908GZ60CFAE es adecuado para 6 aplicacións: Automotive Body Control Module, HVAC Fan and Actuator Control, Industrial Sensor Hub with CAN, Appliance Control Board (White Goods), CAN-Connected Remote I/O Node, Security and Access Control Panel.
Automotive Body Control Module
The MC908GZ60CFAE is well-suited for body control modules (BCMs) in mid-2000s and 2010s vehicles where cost-optimized 8-bit compute is sufficient. Its integrated CAN 2.0A/B controller supports body-network communication at up to 1 Mbps, while the 60KB Flash accommodates BCM application code for lighting, door-lock, and turn-signal coordination. The 40 GPIO pins provide ample headroom for relay and LED driver control. With 4.5-5.5 V supply tolerance and -40 C to +85 C operating range, the part handles cabin and trunk-mounted environments. Compared with newer S12 successors, the GZ60CFAE is preferred for cost-down BCM variants. The 8-channel 10-bit ADC supports battery voltage, ambient light, and temperature sensor reads. Pairing with an NXP TJA1042 CAN transceiver completes the physical-layer interface.
Recomendado
HVAC Fan and Actuator Control
HVAC systems for automotive and industrial enclosures benefit from the MC908GZ60CFAE's 4-channel 16-bit timer for PWM generation, which drives blower motors, mode-door actuators, and flap-position servos. The 60KB Flash holds HVAC control algorithm code plus calibration tables for the blower speed curve, while 2KB RAM stores runtime state. The 10-bit ADC reads cabin temperature, evaporator temperature, and sun-load sensor inputs to compute airflow targets. With a 48-LQFP footprint, the MCU fits on a compact PCB alongside motor-driver stages. The 5V supply integrates with the existing HVAC control board power rail. Compared to motor-control-specific MCUs, the GZ60CFAE provides flexibility for mixed HVAC and lighting functions on a single module.
Recomendado
Industrial Sensor Hub with CAN
Distributed industrial sensor hubs deployed on factory floors use the MC908GZ60CFAE to aggregate analog and digital sensor inputs and forward them over CAN. The 8-channel 10-bit ADC monitors pressure, flow, and temperature transducers, while GPIO reads discrete sensors. The on-chip CAN 2.0A/B interface at 1 Mbps provides deterministic field-bus communication in noisy industrial environments. With 60KB Flash, the firmware can include CANopen or DeviceNet stack fragments for protocol translation. The -40 C to +85 C operating temperature range suits unconditioned factory cabinets and outdoor cabinets. Pairing with an isolated CAN transceiver (e.g., ISO1050) provides robust EMC immunity for industrial deployments.
Recomendado
Appliance Control Board (White Goods)
Washing machines, dryers, and dishwashers use the MC908GZ60CFAE for main control functions where cost and reliability are paramount. The 60KB Flash stores motor-control algorithms, user-interface state machines, and fault-diagnostic logs, while 2KB RAM is sufficient for runtime data. The 4-channel 16-bit timer generates PWM for motor and valve control. The 8-channel 10-bit ADC reads water-level, temperature, and motor-current sensors. Compared to dedicated motor-control MCUs, the GZ60CFAE offers more general-purpose GPIO for keypad and display driving. With 5V tolerance, the device interfaces directly with TTL-level display drivers and triac-control optocouplers without external level shifters.
Recomendado
CAN-Connected Remote I/O Node
Remote I/O modules distributed across industrial machines use the MC908GZ60CFAE as a cost-effective CAN node controller. The on-chip CAN 2.0A/B interface supports both standard and extended identifiers, enabling compatibility with classic CANopen and DeviceNet node IDs. The 40 GPIO pins provide ample headroom for mixed digital and analog I/O, while 60KB Flash hosts the CAN protocol stack and I/O mapping logic. The 48-LQFP package allows compact module designs alongside CAN transceivers and isolated DC/DC converters. The part is preferred over newer S08/S12 successors for cost-optimized nodes where legacy firmware investment is significant.
Recomendado
Security and Access Control Panel
Security alarm panels and access-control readers use the MC908GZ60CFAE for keypad scanning, sensor supervision, and communication with central monitoring stations. The 60KB Flash supports keypad mapping, encrypted credential storage, and event-logging algorithms, while 2KB RAM holds transient state. The 8-channel 10-bit ADC reads PIR motion sensors, smoke-detector interfaces, and battery-backup voltage. UART (SCI) interfaces with GSM/GPRS or Ethernet modules for central-station communication, while GPIO drives sirens and relay outputs. With -40 C to +85 C range, the MCU handles indoor and sheltered outdoor cabinets. The 5V supply integrates with conventional alarm-panel power buses.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MC908GZ60CFAE — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MC908GZ48CFAE | MC908GZ32VFUE | MC908GR32ACFUE | MC908GR48ACFUE | MC9S08GT16CFBE |
|---|---|---|---|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 44-QFP - different |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Program Memory (Flash) | 60 KB | 48 KB | 32 KB | 32 KB | 48 KB | 16 KB (S08 core) |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 1 KB |
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 40 MHz (S08) |
| Core Architecture | HC08 (CPU08) 8-bit | HC08 (CPU08) 8-bit | HC08 (CPU08) 8-bit | HC08 (CPU08) 8-bit | HC08 (CPU08) 8-bit | S08 8-bit |
| CAN Module | CAN 2.0A/B | CAN 2.0A/B | CAN 2.0A/B | None (no CAN) | None (no CAN) | None |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 3.0 V to 5.5 V (wider) | 3.0 V to 5.5 V (wider) | 2.7 V to 5.5 V (wider) |
| ADC | 8-ch, 10-bit | 8-ch, 10-bit | 8-ch, 10-bit | 8-ch, 10-bit | 8-ch, 10-bit | 8-ch, 10-bit |
Diferenciadores clave
- Largest Flash in 48-LQFP HC908GZ family (frente a MC908GZ48CFAE)
- CAN 2.0A/B interface at 1 Mbps (frente a MC908GR32ACFUE)
- Wider industrial temperature range and 5V-only operation (frente a MC9S08GT16CFBE)
Notas de diseño
The MC908GZ60CFAE requires a stable 5V supply; per HC08GZ datasheet the POR (power-on-reset) and LVI (low-voltage inhibit) circuits protect against brown-out conditions. A 78M05 or TPS7A4001 LDO with a 100 nF decoupling capacitor placed within 5 mm of the VDD pin is recommended. Add a 10 uF bulk capacitor at the LDO output and a ferrite bead if the supply is shared with switching converters to prevent MCU noise coupling.
Programming the on-chip Flash requires the monitor ROM to be enabled by holding IRQ high during reset; users omitting this step see 'no communication' on the ICP interface. The HC08GZ datasheet revision flags IRQ/VPP pin handling. For production firmware updates, route IRQ to a dedicated test-point header. Additionally, the CAN bit-timing registers (CANBTR0/CANBTR1) must be loaded AFTER the oscillator is stable - configuring them before oscillator lock causes CAN bus errors.
PCB layout for the 48-LQFP requires a copper land beneath the exposed pad area (if present on this variant) connected to VSS for thermal dissipation; without it, junction temperature can rise 15-20 C above ambient in enclosed modules. Keep CAN_TX/CAN_RX traces short and matched within 5 mm to avoid bit-timing skew. Place the 4.7 kohm CAN bus termination ONLY at the physical ends of the bus - never at intermediate nodes. Use a ground guard trace between CAN signals and switching nodes.
Estimated: at maximum 8 MHz bus clock and 5V supply, the MCU draws approximately 25 mA active current. With 48-LQFP theta_JA around 70 C/W, the junction temperature rise in still air is approximately 8.8 C above ambient at full activity. For enclosed automotive cabin environments with ambient up to 85 C, junction stays within the -40 C to +125 C operating limit. Add a copper pour under the LQFP to lower theta_JA to approximately 50 C/W if thermal margin is critical.
Información de cumplimiento
RoHS and lead-free per NXP ordering information (E suffix in MPN denotes Pb-free). Standard industrial grade (-40 C to +85 C); not AEC-Q100 qualified - choose Q-suffix variants for automotive AEC-Q100 requirements.