MK2705SLF - 24.576MHz Audio Clock Source | Renesas | SOIC-8
N.º de pieza: MK2705SLF ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $3.6413 | $3,64 |
| 10 | $3.6413 | $36,41 |
| 100 | $3.6413 | $364,13 |
| 500 | $3.6413 | $1.820,65 |
| 1.000 | $3.6413 | $3.641,30 |
MK2705SLF Descripción general
An audio clock source is a specialized clock-and-timing IC within the broader integrated-circuit hierarchy. In digital audio equipment, clocks establish the timing reference used to sample and process audio data. The MK2705SLF combines clock-generation functions with an 8-SOIC package, making it suitable for compact consumer and industrial audio assemblies where a stable reference clock is required.
The MK2705 provides one output at 24.576 MHz and supports either MPEG-stream-derived clock generation or standalone operation using a 27 MHz crystal. According to the Renesas MK2705 datasheet, its PLL-based architecture is designed to provide good phase noise and long-term jitter characteristics. The fixed 24.576 MHz frequency is particularly relevant to audio sampling-clock requirements and clock distribution in digital audio equipment.
Typical uses include MPEG audio source equipment, digital audio processing boards, audio converter clocking, digital recording interfaces, and embedded audio systems. The single-output arrangement is appropriate where one derived audio reference is sufficient. Designers should confirm output format, supply requirements, crystal support, and timing margins against the datasheet before committing the circuit to production.
A key implementation consideration is that the source mode and external support network must match the intended clock architecture. Use the manufacturer recommended crystal and load-capacitor arrangement when operating standalone, and account for PLL lock and jitter requirements in the receiving audio subsystem. PCB layout should keep the oscillator path short and isolate clock routing from noisy digital and power-conversion nodes.
This page combines verified manufacturer and distributor information with application guidance, package details, and practical replacement considerations. It supplements the Renesas datasheet and distributor listings with engineering context for clock-source selection, layout, sourcing, and same-footprint replacement evaluation.
Alternativas directas para MK2705SLF — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MK2705SLF (mismo factor de forma y huella) — difiere en Product Type.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MK2705SLFTR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MK2705SLF
✅ Sustitución directa✓ En stock
$3.6413 / unidad
Ver hoja de datos →MK2705SLF Especificaciones
| Product Type | Audio clock source IC |
| Clock Generator Type | PLL-based synchronous audio clock generator |
| Nominal Output Frequency | 24.576 MHz |
| Output Count | 1 output |
| Standalone Clock Input | 27 MHz crystal |
| MPEG Clock Source Support | Yes |
| Encapsulado | 8-SOIC |
| Tipo de montaje | Surface mount |
| Lead Pitch | 0.15 inch |
| AEC-Q100 Qualification | not_applicable |
Guía de configuración de pines de MK2705SLF 8-soic
Configuración de pines para MK2705SLF (encapsulado 8-soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para MK2705SLF.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MK2705SLF es adecuado para 6 aplicacións: MPEG Audio Source Equipment, Digital Audio Converter Clocking, Standalone Crystal Clock Reference, Digital Audio Processing Boards, Audio Recording and Capture Interfaces, Consumer Audio Product Clocks.
MPEG Audio Source Equipment
The MK2705SLF fits MPEG audio equipment that needs a dedicated 24.576 MHz sampling-clock reference derived from the source stream. According to the Renesas MK2705 datasheet, the device provides synchronous clock generation for MPEG-derived audio sampling rates, and its PLL technology is intended to provide good phase noise and long-term jitter characteristics. Place the IC where the recovered MPEG timing information can reach its clock-generation inputs, then route the resulting 24.576 MHz reference to the relevant converter or processing logic. This integration reduces the need for a separate fixed oscillator when stream-derived clocking is required. Validate acquisition time and loop stability in the final transport, because the supplied data does not provide detailed jitter or phase-noise figures.
Recomendado
Digital Audio Converter Clocking
The MK2705SLF is appropriate for digital converter clocking where the system needs a low-jitter 24.576 MHz reference close to the audio signal chain. Its single output is intended for a defined audio timing domain, and the PLL-based architecture supports good phase noise and long-term jitter characteristics according to the Renesas MK2705 datasheet. Use the clock to synchronize an ADC, DAC, or digital audio processor, and keep the route short and isolated from switching regulators and digital return currents. The practical benefit is application-specific clock generation in an 8-SOIC package rather than a generic fixed oscillator. Before layout release, confirm the converter's required clock polarity, jitter tolerance, and acquisition behavior in the applicable device documentation.
Recomendado
Standalone Crystal Clock Reference
The MK2705SLF can serve as a standalone clock source when a 27 MHz crystal is used rather than deriving timing from an MPEG stream. This operating mode is useful in audio subsystems that need a stable local reference but do not receive a usable timing stream from the source. Follow the manufacturer's crystal circuit and grounding guidance, and place the crystal and load components close to the IC to minimize stray capacitance and pickup. The resulting 24.576 MHz output serves as the system's audio timing reference. Because the verified data does not specify startup time, frequency tolerance, or jitter limits, validate those parameters against the Renesas datasheet and the receiving converter before production.
Recomendado
Digital Audio Processing Boards
A digital audio processing board can use the MK2705SLF when it must derive a 24.576 MHz reference from MPEG timing or maintain a local audio clock through PLL multiplication of a 27 MHz crystal. This architecture is useful in playback, recording, and interface modules where downstream DSPs, memory, and converters require a common clock domain. The 8-SOIC footprint supports compact assembly, while the single output keeps the architecture straightforward for one primary audio timing net. Route the clock as a controlled transmission line if its length or topology requires it, and provide a solid ground reference. Do not distribute the output indiscriminately; use a clock buffer when fanout exceeds the device's verified drive capability.
Recomendado
Audio Recording and Capture Interfaces
The MK2705SLF is suitable for recording interfaces that need a deterministic audio reference across an ADC and associated digital circuitry. Its 24.576 MHz output and PLL-based clock generation provide a focused timing solution for sampling systems, while the option to use a 27 MHz crystal supports standalone operation when no upstream MPEG timing is available. Place the clock source near the master-clock-consuming converter, observe the datasheet's recommended decoupling, and avoid sharing high-current return paths with the oscillator network. The single output should feed the primary clock domain; additional loads may require a separate buffer. Verify input frequency range, clock amplitude, and acquisition timing against both the Renesas device and the selected audio converter.
Recomendado
Consumer Audio Product Clocks
The MK2705SLF suits compact consumer audio products where a dedicated MPEG-derived clock can simplify synchronization between source logic and converters. Its 24.576 MHz single-output implementation and 8-SOIC package provide a focused solution for one audio clock domain without adopting a larger synthesizer. The PLL architecture is designed to support good phase noise and long-term jitter characteristics, which matters when clock quality affects conversion fidelity or playback synchronization. Designers should still evaluate startup time and clock availability during mode transitions using the manufacturer datasheet. In a cost-sensitive product, compare the MK2705SLF against a discrete oscillator only after accounting for MPEG timing requirements and the need for stable clock-domain management.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MK2705SLF — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MK2705SLFTR | MK2705SLF |
|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Nominal Output Frequency | 24.576 MHz | 24.576 MHz | 24.576 MHz |
| Output Count | 1 output | 1 output | 1 output |
| Standalone Clock Source | 27 MHz crystal | 27 MHz crystal | 27 MHz crystal |
| MPEG-Derived Clocking | Supported | Supported | Supported |
| Clock Architecture | PLL-based | PLL-based | PLL-based |
| Phase Noise and Jitter | Good phase noise and long-term jitter characteristics; numerical values not provided | Same MK2705 device; numerical values not provided | Same MK2705 device; numerical values not provided |
| Ordering Presentation | MK2705SLF | Tape-and-reel ordering code | Base ordering code |
Diferenciadores clave
- Provides an application-specific 24.576 MHz audio clock source (frente a Generic crystal oscillator)
- Supports both stream-derived and standalone clock architectures (frente a Standalone fixed-frequency oscillator)
- PLL-based timing architecture (frente a Non-PLL clock source)
Notas de diseño
Keep the 27 MHz crystal, load network, and MK2705SLF oscillator pins close together. Use the shortest practical traces, a continuous ground reference, and the crystal configuration specified by Renesas. Route the 24.576 MHz clock away from switching-regulator loops, high-current digital returns, and display or communications circuitry. If the clock reaches multiple loads, use a suitable clock buffer rather than creating an uncontrolled high-impedance stub.
Confirm the required clock format, frequency tolerance, amplitude, phase-noise requirement, and jitter limit before finalizing the source arrangement. The verified data confirms a 24.576 MHz output and states that the PLL technology provides good phase noise and long-term jitter characteristics, but it does not provide numerical limits. Compare the receiving ADC, DAC, or processor requirements directly against the Renesas datasheet and system clock topology.
Follow the datasheet's decoupling and grounding recommendations when applying the MK2705SLF. Place input and output bypass capacitors at the supply pins with short connections, and separate sensitive oscillator returns from switching-node currents where the layout permits. Supply-voltage values were not included in the verified data, so do not infer the operating rail from the 24.576 MHz output frequency. Verify startup, sequencing, and current consumption in the official Renesas documentation.
Información de cumplimiento
The verified data does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because this is a clock-and-timing IC, not an automotive-qualified device in the supplied evidence.