MKV10Z64VLF7 - 75MHz Cortex-M0+ MCU, 64KB Flash | NXP
N.º de pieza: MKV10Z64VLF7 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $6.9462 | $6,95 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MKV10Z64VLF7 Descripción general
A microcontroller is a compact integrated circuit containing a processor core, program memory, data memory, peripherals, and input/output interfaces on one package. The MKV10Z64VLF7 belongs to the Kinetis KV1x family, positioned as an entry point into NXP's Kinetis V series for real-time motor-control systems. Its architecture connects a general-purpose embedded processor with timers, communication interfaces, analog functions, and direct I/O.
The device provides 40 I/O lines plus I2C, SPI, and UART/USART connectivity. Its listed peripherals include DMA, low-voltage detection, power-on reset, and a watchdog timer. NXP states that hardware square root and divide capability produces a 27% performance increase in math-intensive applications versus comparable MCUs, supporting both brushless DC and more computationally demanding permanent-magnet synchronous motor applications.
The Cortex-M0+ architecture is designed for efficient embedded control and supports deterministic peripheral-driven operation. At 75 MHz, the MCU provides substantially more instruction throughput than lower-frequency general-purpose alternatives while retaining a compact, energy-efficient design. Flash memory accommodates firmware, while the 16 KB SRAM provides working memory for control algorithms, state variables, and communication buffers.
Typical uses include sensor nodes, compact industrial controllers, appliance controls, and real-time motor-control platforms. It is particularly appropriate when designers need deterministic timing, multiple communication interfaces, and direct motor-control peripherals without adopting a larger high-performance MCU package.
When designing around the MKV10Z64VLF7, verify the exact pin multiplexing, power requirements, clock configuration, and motor-control resource assignments against the NXP datasheet. PCB layout should preserve clean grounding and appropriate decoupling, especially when the device interfaces with power converters, sensors, or noisy motor-drive stages.
This page combines verified manufacturer and distributor information with a structured specification view, practical design guidance, and sourcing-oriented details. The 64 KB flash and 16 KB SRAM values, 75 MHz operating speed, 48-LQFP package, connectivity, and peripheral summary are identified directly from the supplied product data.
Alternativas directas para MKV10Z64VLF7 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MKV10Z128VLF7
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MKV10Z32VFK4
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MKV11Z64VLF7
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MKV10Z64VLH7
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MKV10Z64VLF7
✅ Sustitución directa✓ En stock
Consulte el precio
Ver hoja de datos →MKV10Z64VLF7 Valores máximos y características eléctricas
| Core | Arm Cortex-M0+ |
| Core Size | 32-bit |
| Operating Frequency | 75 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 |
| SRAM | 16 KB |
| Series | Kinetis KV10 |
| Encapsulado | 48-LQFP, 7 x 7 mm |
| Number of I/O | 40 |
| Connectivity | I2C, SPI, UART/USART |
| Peripherals | DMA, LVD, POR, WDT |
| Hardware Math Capability | Square root and divide |
| Temperature Grade | Industrial |
| Estilo de montaje | Surface mount |
| Terminal Form | Gull wing |
| Terminal Count | 48 |
| Package Code | QFP |
| Package Shape | Square |
| Estado del ciclo de vida | Active |
Guía de configuración de pines de MKV10Z64VLF7 square
Configuración de pines para MKV10Z64VLF7 (encapsulado square). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MKV10Z64VLF7.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MKV10Z64VLF7 es adecuado para 6 aplicacións: BLDC Motor Control, PMSM Motor Control, Industrial Sensor Node, Appliance Control Board, Communications Gateway, Precision Measurement and Control.
BLDC Motor Control
The MKV10Z64VLF7 is well suited to brushless DC motor control because its 75 MHz Cortex-M0+ core provides deterministic processing for commutation and current-control loops, while hardware square-root and divide capability supports math-intensive calculations. The device is positioned by NXP for BLDC applications and includes real-time-control peripherals plus 40 I/O lines for encoder, gate-driver, sensor, and protection signals. Use the 64 KB flash for control firmware and the 16 KB SRAM for loop variables and buffers. The 48-LQFP package keeps the controller compact, although motor-stage layout must minimize switching noise around the MCU.
Recomendado
PMSM Motor Control
For permanent-magnet synchronous motor control, the MKV10Z64VLF7 combines 75 MHz processing with hardware square-root and divide operations that can reduce the computational burden of field-oriented control. Its 40 I/O lines provide access to communication and motor-control resources, while I2C, SPI, and UART/USART support external sensors, gate drivers, and tuning interfaces. The 64 KB flash is appropriate for a compact control application, and 16 KB SRAM can hold state data and communication buffers. Validate timer allocation, PWM mapping, and protection shutdown behavior against the exact device pin table before layout release.
Recomendado
Industrial Sensor Node
The MKV10Z64VLF7 can act as the central controller in a compact industrial sensor node when the design needs more local processing than a simple low-power MCU. Its 75 MHz core supports protocol handling, filtering, and control logic, while I2C and SPI allow connection to sensors and memory devices; UART/USART supports a service or host interface. The 64 KB flash accommodates application firmware and configuration data, and 16 KB SRAM supports short-lived buffers. The industrial temperature grade is useful for equipment environments, but supply voltage, watchdog strategy, EMC protection, and connector pinout must be confirmed from the datasheet.
Recomendado
Appliance Control Board
A home or industrial appliance controller can use the MKV10Z64VLF7 to manage user inputs, relays, sensors, and communications in one microcontroller. The 40 I/O lines provide flexibility for discrete control signals, while I2C, SPI, and UART/USART cover common peripheral buses. Its 75 MHz Cortex-M0+ core can execute state-machine logic alongside timing and monitoring functions, and the 64 KB flash is useful for production firmware. In a motor-driven appliance, place sensitive control traces away from power-stage switching nodes and verify the package pin assignments before committing the board layout.
Recomendado
Communications Gateway
The MKV10Z64VLF7 is appropriate for a small protocol-conversion or communications gateway when the design must combine local I/O with multiple serial interfaces. UART/USART can connect to host equipment, while I2C and SPI can serve sensors, transceivers, or storage. The 75 MHz core provides headroom for protocol processing and supervisory tasks, and the 64 KB flash stores application firmware. Because the MCU has a fixed 48-LQFP footprint, designers should confirm package dimensions, pin multiplexing, and peripheral availability rather than assuming that every communication function is exposed on every pin.
Recomendado
Precision Measurement and Control
The MKV10Z64VLF7 can serve as the control and communications hub in a precision measurement system where sensor conditioning, calibration, and real-time decisions are required. The 75 MHz core supports measurement timing and control tasks, while I2C and SPI connect to converters, sensors, and memory. The 16 KB SRAM can hold acquisition buffers and the 64 KB flash can store firmware and calibration tables. For best results, isolate analog and high-impedance measurement paths from digital switching activity, provide local decoupling at supply pins, and confirm the MCU's specified operating voltage and pin functions before schematic release.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MKV10Z64VLF7 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MKV10Z128VLF7 | MKV10Z32VFK4 | MKV11Z64VLF7 | MKV10Z64VLH7 | MKV10Z64VLF7 |
|---|---|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) - same package family | 48-LQFP (7x7) - same package family | 48-LQFP (7x7) - same package family | 48-LQFP (7x7) - same package family | 48-LQFP (7x7) - same package family |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Related Kinetis KV device; verify exact core | Related Kinetis KV10 device; verify exact core | Arm Cortex-M0+ |
| Flash Memory | 64 KB | 128 KB | 32 KB | 64 KB family reference | 64 KB family reference | 64 KB |
Diferenciadores clave
- Real-time performance with hardware math support (frente a MKV10Z128VLF7)
- Sufficient memory for compact control firmware (frente a MKV10Z32VFK4)
- Connectivity and control-oriented integration (frente a MKV10Z64VLH7)
Notas de diseño
Place all decoupling capacitors close to the corresponding MKV10Z64VLF7 supply pins, with short and low-inductance traces between the capacitor and the package. Confirm the exact supply-pin arrangement and recommended capacitor values from the NXP datasheet before layout. Keep the 48-LQFP footprint within the manufacturer’s land-pattern and solder-mask recommendations so the part is consistently assembled and inspected.
For motor-control and mixed-signal boards, route sensitive sensor, encoder, and measurement signals away from gate-drive, power-switch, and high-current return paths. Use a continuous ground reference where practical, minimize loop area for switching currents, and separate analog and digital return currents before they merge at a controlled ground point. The verified data confirms 40 I/O and multiple serial interfaces, but it does not provide a complete pinout, so pin multiplexing must be checked against the datasheet.
Do not treat the MKV10Z128VLF7 as an automatic replacement for MKV10Z64VLF7. The verified data confirms different flash capacities, and the cross-reference search does not establish identical pin multiplexing, peripherals, or electrical behavior. Likewise, confirm the operating-voltage range, clock configuration, debug pins, and package suffix before releasing a production schematic.
Información de cumplimiento
The supplied verified data identifies the part as active and industrial grade, but it does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Obtain current compliance and qualification documents from NXP before production release.