MPF100T-FCSG325I - PolarFire 109K LE FPGA, 12.7G Transceivers | Microchip
N.º de pieza: MPF100T-FCSG325I ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $263.5 | $2.635,00 |
| 100 | $245 | $24.500,00 |
| 500 | $228 | $114.000,00 |
| 1.000 | $210 | $210.000,00 |
MPF100T-FCSG325I Descripción general
PolarFire FPGAs occupy the mid-range density segment of the FPGA hierarchy, sitting between low-cost CPLDs and high-end SoC FPGAs in cost, density, and transceiver capability. They are built on a non-volatile process technology, which eliminates the need for external boot memory, reduces bill-of-materials cost, and provides instant-on functionality. The PolarFire family is recognized for delivering up to 50% lower power than competing mid-range FPGAs, making the MPF100T suitable for thermally constrained and power-sensitive embedded systems.
Key features include 12.7 Gbps serializer/deserializer (SerDes) transceivers, hardened PCIe Gen2 endpoints, high-security capabilities with built-in cryptographic accelerators, and SEU-immune configuration memory. The device operates across industrial temperature range (-40C to +100C) per the I temperature grade and supports multiple I/O standards including LVDS, LVCMOS, and HSTL. Security features include bitstream authentication, anti-tamper, and unique device identification.
The MPF100T is fabricated on a 28 nm non-volatile process, which inherently lowers static power and provides single-event upset (SEU) immunity for configuration cells. Architecture-wise, the device uses 4-input look-up tables (LUTs) combined with dedicated mathblocks for DSP operations, allowing efficient implementation of FIR filters, FFT engines, and other signal-processing blocks. Hardened IP blocks for PCIe, memory controllers, and transceivers offload common functions from programmable logic.
Typical applications include industrial motor control, video bridging and processing, secure communications, IoT edge gateways, and PCIe-based add-in cards. The combination of low power and integrated transceivers makes the MPF100T well-suited for portable or fanless embedded designs where higher-density FPGAs would exceed thermal budgets.
When designing with the MPF100T, ensure the PCB layout follows Microchip's FCBGA routing guidelines for the 0.5 mm pitch ball array, with matched-length routing for high-speed transceiver lanes. Liberal use of decoupling capacitors near power pins and a solid ground plane are recommended for signal integrity, particularly for the 12.7 Gbps SerDes channels.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes curated for engineers evaluating mid-range FPGAs against competing offerings from Intel Cyclone, Xilinx Artix-7, and Lattice ECP5 devices.
Alternativas directas para MPF100T-FCSG325I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MPF100T-1FCSG325I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPF100T-FCSG325T2
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MPF100TL-FCSG325I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MPF100T-FCSG325I Valores máximos y características eléctricas
| Family | PolarFire |
| Logic Elements | 109,000 |
| System Gates | 7,782,400 |
| User I/O Count | 170 |
| Transceiver Channels | 4 |
| Transceiver Data Rate | 250 Mbps to 12.7 Gbps |
| Encapsulado | 325-ball FCBGA (FCSG325) |
| Package Dimensions | 11 mm x 11 mm |
| Ball Pitch | 0.5 mm |
| Temperature Grade | Industrial (-40C to +100C) |
| Process Technology | 28 nm non-volatile |
| Configuration Memory | SEU-immune flash |
| Tipo de montaje | Surface Mount |
| Nivel MSL | 3 (168 hours) |
| Estado RoHS | Compliant |
Guía de configuración de pines de MPF100T-FCSG325I 11 mm x 11 mm
Configuración de pines para MPF100T-FCSG325I (encapsulado 11 mm x 11 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MPF100T-FCSG325I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MPF100T-FCSG325I es adecuado para 7 aplicacións: Industrial Motor Control, Video Bridging and Processing, Secure Communications and Cryptographic Gateways, PCIe-Based Add-In Cards, IoT Edge Gateways and Wireless Infrastructure, Medical Imaging and Diagnostics, Avionics and Aerospace Communications.
Industrial Motor Control
The MPF100T-FCSG325I is well-suited to industrial motor control and servo drives, where 109K logic elements deliver ample headroom for field-oriented control (FOC) algorithms, PWM generation, and encoder interfaces. Its 12.7 Gbps transceivers support industrial Ethernet protocols such as EtherCAT, PROFINET, or SERCOS III over fiber, while the 28 nm non-volatile process provides SEU-immune configuration ideal for factory automation environments. The industrial temperature grade (-40C to +100C) suits uncontrolled cabinet locations. With up to 50% lower power than competing mid-range FPGAs per Microchip's comparison whitepaper, the device enables fanless drive designs while hard PCIe Gen2 endpoints simplify host-side integration with industrial PCs.
Recomendado
Video Bridging and Processing
The MPF100T-FCSG325I provides the DSP blocks, memory bandwidth, and 170 user I/Os needed for multi-stream video bridging applications such as HDMI-to-SDI converters, video format conversion engines, and multi-display controllers. Its transceiver lanes support SDI rates up to 12 Gbps for UHD broadcast video routing, while the hardened memory controllers enable efficient external DDR3/DDR4 frame buffering. The compact 11x11 mm FCBGA footprint allows design of small-form-factor broadcast and pro-AV equipment where board space is at a premium.
Recomendado
Secure Communications and Cryptographic Gateways
The MPF100T's hardware security features including bitstream authentication, anti-tamper, and built-in cryptographic accelerators make it well-suited to secure communications equipment, VPN accelerators, and tamper-resistant networking hardware. Its 12.7 Gbps transceivers can drive encrypted 10 Gigabit Ethernet or fiber channel links, while the SEU-immune flash configuration protects against bitstream alteration in deployed systems. Defense and aerospace contractors value the PolarFire platform's Common Criteria certification path for cryptographic applications.
Recomendado
PCIe-Based Add-In Cards
The MPF100T-FCSG325I includes hardened PCIe Gen2 endpoints, making it ideal for PCIe add-in cards such as data acquisition boards, software-defined radio front-ends, and protocol analyzers. The combination of PCIe Gen2, 109K logic elements, and 12.7 Gbps transceivers supports designs where the FPGA interfaces to the host via PCIe while driving external high-speed serial links to instruments or antennas. Per Microchip's power comparison, the device achieves Gen2 link saturation at lower power than equivalent competing mid-range FPGAs.
Recomendado
IoT Edge Gateways and Wireless Infrastructure
Low power consumption makes the MPF100T-FCSG325I attractive for IoT edge gateways, where fanless operation and thermal budget envelope the design. The 12.7 Gbps transceivers handle backhaul links (10GbE, CPRI) while the FPGA fabric runs packet classification, encryption, and protocol adaptation. The integrated PCIe endpoint allows direct attachment of wireless baseband modems or AI co-processors to the FPGA, reducing BOM cost in LTE/5G small cells and smart-city aggregation points.
Recomendado
Medical Imaging and Diagnostics
The MPF100T-FCSG325I supports portable and benchtop medical imaging systems (ultrasound front-ends, patient monitors, endoscopy processors) where its low power enables smaller, quieter instruments. The DSP mathblocks accelerate beamforming and image reconstruction while 12.7 Gbps transceivers drive high-resolution sensors. PolarFire's SEU-immune configuration is particularly valuable for medical devices requiring predictable long-term reliability, where bitstream corruption could compromise diagnostic accuracy or patient safety.
Recomendado
Avionics and Aerospace Communications
In avionics and aerospace subsystems, the MPF100T-FCSG325I provides radiation-tolerant configuration memory (SEU-immune flash) without the size, weight, and power penalty of full rad-hardened FPGAs. Its 12.7 Gbps transceivers handle MIL-STD-1553B and ARINC 818 data links while 170 user I/Os interface with avionics sensors. Microchip's aerospace-grade qualification paths and built-in anti-tamper features make the PolarFire platform appropriate for flight-control adjuncts, mission computers, and secure communications payloads.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MPF100T-FCSG325I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MPF100T-1FCSG325I | MPF100T-FCSG325T2 | MPF100TL-FCSG325I |
|---|---|---|---|---|
| Package | 325-ball FCBGA (FCSG325) 11x11 mm | 325-ball FCBGA (FCSG325) - same | 325-ball FCBGA (FCSG325) - same | 325-ball FCBGA (FCSG325) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Logic Elements | 109,000 | 109,000 | 109,000 | 109,000 |
| System Gates | 7,782,400 | 7,782,400 | 7,782,400 | 7,782,400 |
| User I/O | 170 | 170 | 170 | 170 |
| Transceiver Count | 4 lanes @ up to 12.7 Gbps | 4 lanes @ up to 12.7 Gbps | 4 lanes @ up to 12.7 Gbps | 4 lanes @ up to 12.7 Gbps |
| Temperature Grade | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) |
| Speed Grade | T (standard) | -1 (extended) | T2 | T (low-power variant) |
Diferenciadores clave
- Non-volatile flash configuration eliminates boot PROM (frente a Intel Cyclone V 5CGXFC5C)
- Up to 50% lower power at mid-range density (frente a Xilinx Artix-7 XC7A100T)
- SEU-immune configuration with hardware crypto (frente a Lattice ECP5 LFE5UM-85)
Notas de diseño
Estimated: The 325-ball FCBGA at 0.5 mm pitch requires 4-layer PCB with microvia stack-up (laser-drilled vias) per IPC-6012 Class 3. Microchip's PolarFire Hardware Specification recommends matched-length routing (within 5 mil) for the four SerDes lanes to meet 12.7 Gbps jitter requirements; reference the IBIS-AMI models in the Libero SoC tool suite for simulation.
The MPF100T-FCSG325I at full fabric utilization and 100% transceiver utilization can reach junction temperatures above 100C without airflow. Use the theta_JA values from the PolarFire family datasheet to determine copper-pour requirements; typically at least 25 sq. cm. of 4-layer ground plane is needed for industrial-temperature operation without forced air.
Do not confuse the MPF100T-FCSG325I (industrial temp grade, 170 I/O) with the MPF100T-FCG484 (different BGA package, different I/O count) - they are not drop-in replacements despite similar naming. Always confirm the full part string (FCSG325I vs FCG484I) before placing production orders, and verify the chip's speed-grade option bit settings match your design's timing constraints.
Estimated: Decoupling follows Microchip's PolarFire PCB Design Guide: place 100 nF X7R capacitors within 5 mm of every VDD/VPP pin pair, plus 1 uF and 10 uF bulk capacitors at each supply rail. The 12.7 Gbps transceivers require isolated analog supply rails (VP_TX, VP_RX) with LC filters to suppress coupling noise from switching digital supplies.
Información de cumplimiento
RoHS compliant per Microchip product page and distributor listings. AEC-Q100 not applicable for FPGAs - use MPFX00XA automotive-grade devices for qualified designs. Halogen-free status not explicitly stated in provided data.
