PCM1791ADBR - 24-Bit Stereo Audio DAC | Texas Instruments
N.º de pieza: PCM1791ADBR ✓ ActivoPCM1791ADBR Descripción general
An audio DAC is a mixed-signal integrated circuit that converts digital PCM audio samples into analog voltage signals for amplification and reproduction. Within the broader semiconductor hierarchy, the PCM1791ADBR belongs to the DAC family, which is part of data converters and analog mixed-signal ICs. Its balanced outputs can simplify the connection between the converter and a subsequent analog amplifier while reducing common-mode noise in a carefully designed audio system.
The converter’s principal performance figures include 24-bit resolution, 192 kHz sampling capability, 113 dB typical dynamic range, 113 dB typical signal-to-noise ratio, and 0.001% typical total harmonic distortion plus noise. The manufacturer describes a 2.1 V RMS full-scale differential output at the post amplifier. Programmable gain and digital filtering provide additional control for matching the converter to different downstream amplifier and analog-output arrangements.
PCM1791ADBR is a monolithic CMOS device implementing TI’s advanced segment DAC architecture. This architecture is designed to achieve strong dynamic performance and better immunity to sampling-clock jitter than many conventional converter implementations. The PCM interface and internal support circuitry are integrated into one package, reducing the number of discrete components required for a stereo conversion path. Its balanced voltage outputs also permit either balanced downstream amplification or conversion to an unbalanced output where appropriate.
Typical applications include high-resolution CD and DVD audio conversion, professional audio equipment, digital mixing consoles, multichannel home-theater systems, active loudspeakers, and other consumer audio products that require simultaneous left- and right-channel conversion. The device can also serve as the DAC stage in a digital playback system feeding line-level amplifiers. Clock and interface implementation remain important because jitter, grounding, and output filtering influence the final analog performance.
For a new layout, place the digital interface and analog supply connections according to the manufacturer’s recommended schematic and pin description. Keep sensitive analog output routing compact, maintain a quiet ground reference, and account for the package’s 28-lead SSOP footprint. The balanced output topology is an advantage, but the downstream amplifier must support the selected signal arrangement to realize its full benefit.
This product page consolidates the manufacturer’s architecture information, distributor listing details, verified performance figures, drop-in alternatives, and application guidance. It also provides a package-aware comparison and practical design notes so engineers can assess the PCM1791ADBR against other stereo DAC options without relying on a basic catalog summary alone.
Alternativas directas para PCM1791ADBR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
PCM1791ADBRG4
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PCM1791ADB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PCM1791ADBG4
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
PCM1791ADBR Valores máximos y características eléctricas
| Converter Type | Stereo audio digital-to-analog converter |
| Resolución | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| DSD Capability | 200 kHz DSD |
| Dynamic Range | 113 dB typical |
| Signal-to-Noise Ratio | 113 dB typical |
| Total Harmonic Distortion Plus Noise | 0.001% typical |
| Full-Scale Differential Output | 2.1 V RMS at post amplifier |
| Configuración de salida | Balanced differential voltage output |
| DAC Architecture | Advanced segment DAC architecture |
| Digital Interface | 3-wire serial PCM interface |
| Gain Control | Programmable gain |
| Digital Filtering | Digital filtering |
| Process Technology | CMOS |
| Encapsulado | 28-lead SSOP, 5.30 mm width |
| Tipo de montaje | Surface mount |
| Clock Jitter Tolerance | Improved tolerance with segment DAC architecture |
Guía de configuración de pines de PCM1791ADBR 28-lead ssop, 5.30 mm width
Configuración de pines para PCM1791ADBR (encapsulado 28-lead ssop, 5.30 mm width). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para PCM1791ADBR.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PCM1791ADBR es adecuado para 6 aplicacións: High-Resolution CD and DVD Audio, Professional Audio Line Output, Digital Music Player, Active Loudspeaker USB Audio, Digital Audio Mixer and Monitor, Home Theater Stereo Front Channel.
High-Resolution CD and DVD Audio
PCM1791ADBR fits high-resolution stereo playback because it accepts 24-bit PCM data at rates up to 192 kHz and converts it with 113 dB typical dynamic range and 0.001% typical THD+N. The balanced differential outputs can feed a line-level amplifier without converting the stereo pair to a single-ended signal in the converter itself. Its 192 kHz sampling support preserves high-resolution source material, while the 113 dB SNR provides ample headroom for quiet musical passages. Designers should still treat the DAC clock as a critical analog signal and implement the manufacturer’s recommended filtering and grounding arrangement to preserve the converter’s performance in the finished system.
Recomendado
Professional Audio Line Output
The PCM1791ADBR is suitable for professional line-output stages that require separate left and right conversion with balanced connections. Its 24-bit resolution supports detailed digital mix sources, and the 2.1 V RMS typical full-scale differential output provides a defined starting point for downstream gain design. The balanced output arrangement can help maintain signal integrity over internal cable runs when paired with a compatible balanced input. For installation in a console or rack system, use a clean analog reference, isolate switching supplies from the converter area, and verify the manufacturer’s recommended output-filter implementation before adding additional filtering.
Recomendado
Digital Music Player
A portable or desktop digital music player can use PCM1791ADBR when its transport accepts 24-bit PCM and the design benefits from a dedicated high-performance converter stage. The converter’s 113 dB typical SNR and 0.001% typical THD+N support low-distortion playback, while balanced outputs offer a straightforward path to a line amplifier or headphone-amplifier interface. Because the PCM1791ADBR does not include an integrated headphone amplifier, the downstream stage must provide the required current capability and output impedance. Board-area partitioning and short output traces remain important in compact enclosures where switching converters and display circuitry can create interference.
Recomendado
Active Loudspeaker USB Audio
PCM1791ADBR can serve as the DAC in an active loudspeaker receiving digital audio from a USB or network audio source. Its support for 192 kHz sampling allows the speaker electronics to preserve high-rate digital streams, while the balanced differential outputs can feed a power-amplifier stage without an immediate single-ended conversion. This makes the converter useful in active studio monitors and powered bookshelf speakers. The system clock must be derived cleanly from the digital audio source, and the analog output stage should be laid out away from the power amplifier’s high-current switching paths to avoid injecting channel-dependent distortion into the DAC output.
Recomendado
Digital Audio Mixer and Monitor
PCM1791ADBR can provide the final stereo monitoring conversion in a compact digital mixer, headphone monitor, or broadcast monitoring path. The 24-bit interface preserves source-word precision, and the converter’s 113 dB typical dynamic range helps monitoring systems reveal low-level program material without adding significant converter noise. Balanced outputs are particularly useful for routing to professional monitor inputs over short interconnects. To maintain consistency across both channels, use matched analog layouts, provide low-noise supply arrangements, and test the selected digital filter and attenuation settings for the required bandwidth and phase response.
Recomendado
Home Theater Stereo Front Channel
PCM1791ADBR is applicable to the stereo front channels of a home-theater receiver when the design uses an external converter or premium analog stage. Balanced outputs can simplify connection to a balanced preamplifier, and 192 kHz sampling support accommodates high-resolution audio streams when the source and digital routing support them. The converter’s 0.001% typical THD+N is useful in a signal chain intended to preserve subtle harmonic detail. Designers should account for the added stereo DAC channel, analog filtering, and clock distribution while ensuring that the receiver’s channel routing and channel-level calibration remain correct after the digital-to-analog conversion stage.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PCM1791ADBR — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PCM1791ADBRG4 | PCM1791ADB | PCM1791ADBG4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-lead SSOP | 28-lead SSOP | 28-lead SSOP | 28-lead SSOP |
| Converter Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz | 192 kHz |
| Dynamic Range | 113 dB typical | 113 dB typical | 113 dB typical | 113 dB typical |
| Signal-to-Noise Ratio | 113 dB typical | 113 dB typical | 113 dB typical | 113 dB typical |
| Total Harmonic Distortion Plus Noise | 0.001% typical | 0.001% typical | 0.001% typical | 0.001% typical |
| Output Configuration | Balanced differential voltage output | Balanced differential voltage output | Balanced differential voltage output | Balanced differential voltage output |
| DAC Architecture | Advanced segment DAC architecture | Advanced segment DAC architecture | Advanced segment DAC architecture | Advanced segment DAC architecture |
| Gain Control | Programmable gain | Programmable gain | Programmable gain | Programmable gain |
| Digital Interface | 3-wire serial PCM interface | 3-wire serial PCM interface | 3-wire serial PCM interface | 3-wire serial PCM interface |
Diferenciadores clave
- High-resolution stereo conversion with balanced outputs (frente a PCM1791ADB)
- Segment DAC architecture with improved jitter tolerance (frente a PCM1791ADBRG4)
- Defined low-distortion performance for balanced audio paths (frente a PCM1791ADBG4)
Notas de diseño
Route the two differential analog output channels as compact, matched pairs and keep the digital PCM and clock traces away from them. The balanced outputs should reach the downstream amplifier through symmetrical paths, with a continuous ground reference and no unrelated high-current routing beneath the output section. This layout discipline is especially important when PCM1791ADBR is used beside a switching power stage or a high-power audio amplifier.
Treat the sampling clock as a high-quality signal. Use the manufacturer’s recommended clock connection and supported digital input arrangement, minimize branch stubs, and avoid routing the clock next to analog outputs. The advanced segment DAC architecture improves jitter tolerance, but it cannot eliminate jitter already introduced through poor clock distribution, inadequate grounding, or noisy supply connections.
Do not assume that a suffix change alone proves drop-in equivalence. Before replacing PCM1791ADBR with PCM1791ADBRG4, PCM1791ADB, or PCM1791ADBG4, compare the exact orderable part number, package dimensions, lead finish, pin functions, supported operating-temperature range, clock mode, and reel orientation. The converters share the same core family, but procurement and qualification records must match the specific suffix used on the released BOM.
Follow the manufacturer’s recommended analog and digital supply arrangement, including the specified decoupling capacitors and voltage sequencing where applicable. Keep switching-regulator and converter outputs physically separated from the sensitive analog section. Because typical performance figures such as 113 dB SNR and 0.001% THD+N assume the intended supply and test conditions, an incorrect decoupling network can prevent the finished circuit from reaching the converter’s expected performance.
Información de cumplimiento
PCM1791ADBR is an audio converter IC rather than an automotive-qualified device. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was stated in the manufacturer and distributor pages, so these fields remain unknown.