PIC18F67J90T-I/PT - 8-Bit 48MHz 128KB Flash LCD MCU | Microchip
N.º de pieza: PIC18F67J90T-I/PT ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $7.1 | $7,10 |
| 10 | $6.39 | $63,90 |
| 100 | $5.71 | $571,00 |
| 500 | $5.13 | $2.565,00 |
| 1.000 | $4.65 | $4.650,00 |
PIC18F67J90T-I/PT Descripción general
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals (timers, ADC, communication ports, I/O). The PIC18F67J90 belongs to Microchip's PIC18F 'J' family, which uses a 16-bit enhanced instruction set running from a 2.0V-3.6V core rail while allowing 5.5V-tolerant I/O. Within the broader taxonomy it is a microcontroller -> 8-bit MCU -> embedded controller -> semiconductor IC, distinguished from 16/32-bit parts by its 8-bit data path and 16-bit instruction word.
Key specifications include 128 KB (64K x 16) Flash, 4 KB RAM, 54 digital I/O pins, an internal LCD driver supporting up to 4 commons and up to 48 segments, two USART, two MSSP (SPI/I2C), a 12-channel 10-bit ADC, two analog comparators and a real-time clock calendar with separate 32 kHz oscillator. The part runs from 2.0 V to 3.6 V (VDDCORE) and tolerates I/O voltages up to 5.5 V on digital pins. It offers 100,000 erase/write cycle endurance and >40-year Flash retention.
The PIC18F67J90 uses an enhanced Harvard architecture with a 16-bit instruction word and an 8-bit data path, and Microchip's nanoWatt XLP technology for low-power sleep modes (typical sleep current in the low-uA range). The integrated LCD controller charges the segment commons in software-controlled sequences, allowing direct connection to glass without an external charge-pump IC. Internal 8 MHz and 31 kHz RC oscillators plus PLL provide flexible clocking from a single 3V supply.
Typical applications include handheld battery-powered meters (utility/gas/water), home thermostats, electronic shelf labels, blood-pressure/glucose monitors, security keypads and segment-LCD automotive clusters. The combination of integrated segmented-LCD driver, low-power modes and ample Flash makes the family a one-chip solution for any segment-LCD human-machine interface.
Designers should budget for the dedicated VDDCORE/VDDIO/VLCD rails and provide proper bias resistors on the LCD segment pins. The internal PLL requires the configuration bits to be set correctly, and JTAG is disabled by default to free those pins. Use MPLAB X IDE with the XC8 compiler for code development and ICD3/PICKit4 for in-circuit debug.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas directas para PIC18F67J90T-I/PT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC18F67J90T-I/PT (mismo factor de forma y huella) — difiere en ADC, Package, Core Architecture, RAM, Operating Temperature.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC18F67J90-I/PT
✅ Sustitución directa✓ En stock
$5.64 / unidad
Ver hoja de datos →PIC18F65J90T-I/PT
✅ Sustitución directa✓ En stock
$3.78 / unidad
Ver hoja de datos →PIC18F66J90T-I/PT
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC18F66J60-I/PT
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC18F66K90-I/PT
✅ Sustitución directa✓ En stock
$4.15 / unidad
Ver hoja de datos →PIC18F67J60-I/PT
✅ Sustitución directa✓ En stock
$5.2 / unidad
Ver hoja de datos →PIC18F67J90T-I/PT Valores máximos y características eléctricas
| Core Architecture | PIC18 (8-bit, enhanced Harvard) |
| Program Memory (Flash) | 128 KB (64K x 16) |
| RAM | 4 KB |
| Maximum CPU Speed | 48 MHz (12 MIPS) |
| Supply Voltage (VDDCORE) | 2.0 V to 3.6 V |
| I/O Voltage Tolerance | Up to 5.5 V |
| Digital I/O Pins | 54 |
| Encapsulado | 64-pin TQFP (PT) 10x10 mm |
| Temperatura de funcionamiento | -40C to +85C (industrial, I grade) |
| Tipo de montaje | Surface Mount (Tape & Reel, T suffix) |
| Integrated LCD Driver | Yes, segmented, up to 4 commons x 48 segments |
| ADC | 12-channel, 10-bit |
| Communication | 2x USART, 2x MSSP (SPI/I2C) |
| Comparators | 2 analog comparators |
| RTC | Yes, with dedicated 32 kHz oscillator |
| Flash Endurance | 100,000 erase/write cycles (typical) |
| Data Retention | >40 years (typical) |
| Estado RoHS | Compliant |
Configuración de pines de PIC18F67J90T-I/PT
| Pin 1 | RG0/SEG33 — Digital I/O port RG0 / LCD segment 33 |
| Pin 2 | RG1/SEG34 — Digital I/O port RG1 / LCD segment 34 |
| Pin 3 | RG2/SEG35 — Digital I/O port RG2 / LCD segment 35 |
| Pin 4 | RG3/SEG36 — Digital I/O port RG3 / LCD segment 36 |
| Pin 5 | RG4/SEG37 — Digital I/O port RG4 / LCD segment 37 |
| Pin 6 | MCLR — Master clear reset input, drive low to reset |
| Pin 7 | OSC1/CLKI/RA7 — Crystal oscillator input / external clock / port A bit 7 |
| Pin 8 | OSC2/CLKO/RA6 — Crystal oscillator output / clock out / port A bit 6 |
| Pin 9 | RA0/AN0 — Port A bit 0 / ADC input AN0 |
| Pin 10 | RA1/AN1 — Port A bit 1 / ADC input AN1 |
| Pin 11 | RA2/AN2/VREF- — Port A bit 2 / ADC input AN2 / ADC VREF- |
| Pin 12 | RA3/AN3/VREF+ — Port A bit 3 / ADC input AN3 / ADC VREF+ |
| Pin 13 | RA4/AN4/T0CKI — Port A bit 4 / ADC input AN4 / Timer0 clock input |
| Pin 14 | RA5/AN5/SS1 — Port A bit 5 / ADC input AN5 / SPI1 slave select |
| Pin 15 | VDD — Positive supply for I/O and core logic (2.0-3.6 V) |
| Pin 16 | VSS — Ground reference |
| Pin 17 | RA6 — Port A bit 6 (shared with OSC2) |
| Pin 18 | RA7 — Port A bit 7 (shared with OSC1) |
| Pin 19 | RB0/INT0/FLT0 — Port B bit 0 / external interrupt 0 / PWM fault input |
| Pin 20 | RB1/INT1 — Port B bit 1 / external interrupt 1 |
| Pin 21 | RB2/INT2 — Port B bit 2 / external interrupt 2 |
| Pin 23 | RB3/INT3 — Port B bit 3 / external interrupt 3 |
| Pin 24 | RB4/KBI0 — Port B bit 4 / keyboard interrupt 0 |
| Pin 25 | RB5/KBI1 — Port B bit 5 / keyboard interrupt 1 |
| Pin 26 | RB6/KBI2/PGC — Port B bit 6 / keyboard interrupt 2 / ICSP clock |
| Pin 27 | RB7/KBI3/PGD — Port B bit 7 / keyboard interrupt 3 / ICSP data |
| Pin 28 | VDD — Positive supply for I/O and core logic |
| Pin 29 | VSS — Ground reference |
| Pin 30 | RC0/SOSCO — Port C bit 0 / secondary oscillator output (32 kHz RTC) |
| Pin 31 | RC1/SOSCI — Port C bit 1 / secondary oscillator input (32 kHz RTC) |
| Pin 32 | RC2/CCP1 — Port C bit 2 / CCP1 PWM/capture/compare |
| Pin 33 | RC3/CCP2 — Port C bit 3 / CCP2 PWM/capture/compare |
| Pin 34 | RC4 — Port C bit 4 |
| Pin 35 | RC5 — Port C bit 5 |
| Pin 36 | RC6/CCP3 — Port C bit 6 / CCP3 |
| Pin 37 | RC7/CCP4 — Port C bit 7 / CCP4 |
| Pin 38 | RD0/PSP0 — Port D bit 0 / parallel slave port data 0 |
| Pin 39 | RD1/PSP1 — Port D bit 1 / parallel slave port data 1 |
| Pin 40 | RD2/PSP2 — Port D bit 2 / parallel slave port data 2 |
| Pin 41 | RD3/PSP3 — Port D bit 3 / parallel slave port data 3 |
| Pin 42 | RD4/PSP4 — Port D bit 4 / parallel slave port data 4 |
| Pin 43 | RD5/PSP5 — Port D bit 5 / parallel slave port data 5 |
| Pin 44 | RD6/PSP6 — Port D bit 6 / parallel slave port data 6 |
| Pin 45 | RD7/PSP7 — Port D bit 7 / parallel slave port data 7 |
| Pin 46 | VDD — Positive supply for I/O and core logic |
| Pin 47 | VSS — Ground reference |
| Pin 48 | RE0/RD — Port E bit 0 / parallel slave port read strobe |
| Pin 49 | RE1/WR — Port E bit 1 / parallel slave port write strobe |
| Pin 50 | RE2/CS — Port E bit 2 / parallel slave port chip select |
| Pin 51 | RE3 — Port E bit 3 |
| Pin 52 | RE4 — Port E bit 4 |
| Pin 53 | RE5 — Port E bit 5 |
| Pin 54 | RE6 — Port E bit 6 |
| Pin 55 | RE7 — Port E bit 7 |
| Pin 56 | RF0/AN6 — Port F bit 0 / ADC input AN6 |
| Pin 57 | RF1/AN7 — Port F bit 1 / ADC input AN7 |
| Pin 58 | RF2/AN8 — Port F bit 2 / ADC input AN8 |
| Pin 59 | RF3/AN9 — Port F bit 3 / ADC input AN9 |
| Pin 60 | RF4/AN10 — Port F bit 4 / ADC input AN10 |
| Pin 61 | RF5/AN11 — Port F bit 5 / ADC input AN11 |
| Pin 62 | RF6 — Port F bit 6 |
| Pin 63 | RF7 — Port F bit 7 |
| Pin 64 | VLCD1 — LCD bias voltage node 1 (external cap) |
Aplicaciones típicas
PIC18F67J90T-I/PT es adecuado para 6 aplicacións: Handheld Utility Meters, Programmable Thermostats, Home Security Keypads, Portable Medical Devices, Industrial Segment-LCD HMI, Consumer Appliance Front Panels.
Handheld Utility Meters
The PIC18F67J90T-I/PT is purpose-built for handheld utility meters (gas, water, electricity sub-metering) because the integrated segmented LCD driver eliminates the need for an external charge-pump and segment driver IC, shrinking BOM by 1-2 USD per unit. With 128 KB Flash, the meter can host multi-language menus, rolling 12-month consumption logs and tamper-detection algorithms without external memory. The 12-channel 10-bit ADC digitizes pulse-output flow sensors and analog pressure transducers simultaneously, while the RTC with 32 kHz crystal keeps accurate time-stamping across battery replacement. Operating from 2.0-3.6 V on two AA cells, the nanoWatt XLP sleep modes hold quiescent current under 1 uA between measurements, delivering a 10-year battery life figure typical of utility metering.
Recomendado
Programmable Thermostats
Programmable 7-day residential thermostats benefit from the PIC18F67J90T-I/PT's 128 KB Flash for multi-program schedule storage, learning algorithm history and a large UI state machine. The 54 digital I/O pins drive the LCD glass (typically 4x32 segments for time/temperature/program icons) plus front-panel push buttons and rotary encoder without external I/O expanders. The integrated RTC with 32 kHz crystal maintains wall-clock accuracy across short power-line brownouts, while the 12-bit ADC reads thermistor or 10K NTC sensors with 0.1C resolution after averaging. Sleep current under 1 uA preserves battery backup for the clock during AC power loss, and the 5.5 V I/O tolerance simplifies connection to 24 VAC HVAC control circuitry via opto-isolators.
Recomendado
Home Security Keypads
The PIC18F67J90T-I/PT serves home-security alarm keypads where 128 KB Flash stores user PIN databases, event logs and encrypted RF link code tables. The integrated segmented LCD shows armed/stay/disarmed status, zone faults and bypass menus on a 4x20 character-equivalent display without an external controller. Two USARTs support simultaneous connection to the main alarm panel (RS-485) and a Wi-Fi/BLE module for smartphone notification, while two MSSP ports interface to an I2C keypad scanner and SPI EEPROM for audit-trail storage. nanoWatt XLP sleep current under 1 uA lets the keypad run from backup battery during AC loss, and the industrial -40 to +85 C range suits unheated garages and outdoor entry panels.
Recomendado
Portable Medical Devices
Portable medical devices such as blood-pressure monitors, glucose meters and pulse oximeters use the PIC18F67J90T-I/PT because the integrated LCD driver removes an extra analog IC from the BOM and the 5.5 V-tolerant I/O simplifies the high-voltage pump driver interface. With 128 KB Flash the device can host FDA-required algorithm validation code, multi-language UI strings, and a complete measurement audit trail without external memory. The 12-channel 10-bit ADC reads cuff pressure, optical PPG sensor and battery voltage simultaneously, while the RTC timestamps every measurement for clinician review. nanoWatt XLP sleep current below 1 uA and 2.0-3.6 V operation enable 2x AAA battery designs with a one-year shelf-life target typical of home medical products.
Recomendado
Industrial Segment-LCD HMI
Industrial control panels using 4x40 or 4x48 segment LCDs map cleanly to the PIC18F67J90T-I/PT's on-chip segmented driver, eliminating the charge-pump and segment-driver IC normally required. With 128 KB Flash and 4 KB RAM, the MCU can host MODBUS RTU slave firmware, parameter menus in multiple languages, and a real-time PID loop for direct digital control of heaters or valves. The 54 digital I/O drive opto-isolated 24 V outputs via simple NPN arrays and accept digital sensor inputs through opto-couplers; the 5.5 V I/O tolerance makes interfacing to 5 V logic peripherals straightforward. The -40 to +85 C industrial range and 100,000-cycle Flash endurance suit continuous-operation factory-floor deployment.
Recomendado
Consumer Appliance Front Panels
Washing machines, dishwashers and microwave ovens use the PIC18F67J90T-I/PT for their segment-LCD front-panel controllers because 128 KB Flash accommodates complex cycle state machines, fuzzy-logic wash algorithms and multi-language menu tables. The integrated segmented LCD driver supports the 4x32 to 4x48 segment glass typical of mid-range appliances, while the 12-channel ADC reads motor current, water level, temperature sensors and door-switch states without external multiplexers. The two USARTs interface to the inverter board and the Wi-Fi module for smartphone control, while nanoWatt XLP keeps standby power below the EU 0.5 W directive for networked appliances.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC18F67J90T-I/PT — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC18F67J90-I/PT | PIC18F65J90T-I/PT | PIC18F66J90T-I/PT | PIC18F66J60-I/PT | PIC18F66K90-I/PT | PIC18F67J60-I/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP (PT) 10x10 mm | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same |
| Program Memory (Flash) | 128 KB | 128 KB | 32 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| RAM | 4 KB | 4 KB | 2 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Maximum CPU Speed | 48 MHz (12 MIPS) | 48 MHz (12 MIPS) | 48 MHz (12 MIPS) | 48 MHz (12 MIPS) | 48 MHz (12 MIPS) | 64 MHz (16 MIPS) | 48 MHz (12 MIPS) |
| Integrated LCD Driver | Yes (up to 4x48 segments) | Yes (same) | Yes (same) | Yes (same) | Yes (same) | Yes (same) | Yes (same) |
| Supply Voltage (Core) | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 1.8 V to 5.5 V (wider) | 2.0 V to 3.6 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C (extended) | -40C to +85C |
| ADC | 12-channel, 10-bit | 12-channel, 10-bit | 12-channel, 10-bit | 12-channel, 10-bit | 11-channel, 10-bit | 17-channel, 12-bit (upgrade) | 12-channel, 10-bit |
Diferenciadores clave
- Highest Flash density in the 64-pin TQFP PIC18FJ LCD family (frente a PIC18F66J90T-I/PT)
- Drop-in package compatibility with PIC18F65J90 (frente a PIC18F65J90T-I/PT)
- Industrial-grade -40 to +85 C with integrated RTC and LCD driver (frente a PIC18F66K90-I/PT)
Notas de diseño
Provide separate VDD (digital I/O and core) and AVDD/AVSS (ADC reference) rails with proper decoupling: 0.1 uF ceramic on each VDD pin plus 10 uF bulk. The PIC18F67J90T-I/PT core runs from 2.0-3.6 V; do not exceed 3.6 V on VDDCORE. The dedicated VLCD pins require external capacitors (typically 0.1 uF on each VLCDx pin) for charge-pump stability of the segmented-LCD bias. Tie unused I/O to defined logic levels (VSS or VDD) to minimize transient current. Avoid powering the MCU before the LCD glass is connected or before VLCD capacitors are populated - the LCD charge pump can otherwise dump current into floating segments.
Place the 32.768 kHz RTC crystal as close as possible to the SOSCO/SOSCI pins with short traces and a guard ring tied to VSS to reduce noise coupling; use NPO/C0G ceramic load capacitors matched to the crystal's load specification (typically 6-12.5 pF). Keep ADC analog traces (ANx) away from the digital switching lines and the LCD segment outputs to avoid digital-to-analog crosstalk. The 64-pin TQFP requires thermal vias under the exposed pad (if present) tied to the internal ground plane. The PT package does not have an exposed pad - no thermal pad layout required.
Do not program the PIC18F67J90T-I/PT with configuration bits that disable the primary oscillator when no external crystal is fitted - the MCU will appear bricked. Always reserve the MCLR pin with the recommended 10 kohm pull-up and 100 nF cap for ICSP programming. When migrating code from PIC18F46K22 to PIC18F67J90, note the different interrupt vector layout and the additional LCD register set. The JTAG pins are multiplexed with PORTB; ensure JTAG is disabled in configuration bits if those PORTB pins are needed for application I/O.
Información de cumplimiento
RoHS and REACH compliant per Microchip product page; lead-free and halogen-free per Microchip material declaration. Not AEC-Q100 qualified - this part is targeted at consumer/industrial markets, not automotive.
