PIC24EP128MC206-I/MR - 70 MIPS 16-bit Motor Control MCU | Microchip
N.º de pieza: PIC24EP128MC206-I/MR ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $7.45 | $7,45 |
| 10 | $6.71 | $67,10 |
| 100 | $5.96 | $596,00 |
| 500 | $5.36 | $2.680,00 |
| 1.000 | $4.77 | $4.770,00 |
PIC24EP128MC206-I/MR Descripción general
What is a 16-bit Motor Control MCU? A microcontroller (MCU) is a single-chip computer integrating a CPU, memory, and programmable peripherals. A 16-bit MCU executes instructions on 16-bit data paths, offering a balance between 8-bit simplicity and 32-bit performance. Motor-control MCUs add specialized peripherals - high-resolution PWM, op-amps, and fast ADCs - that simplify three-phase inverter control, FOC algorithms, and sensorless commutation. PIC24EP128MC206 belongs to the broader power-management and motor-control hierarchy: MCU -> 16-bit MCU -> DSP-enhanced MCU -> PIC24E family -> PIC24EP motor-control series.
Key differentiating specifications include the 70 MIPS dsPIC/PIC24E core, dual 10-bit/12-bit ADC options, internal comparators and operational amplifiers for current-shunt feedback, and hardware Peripheral Trigger Generator (PTG) for deterministic timing. The on-chip op-amps eliminate external analog front-end components, reducing BOM cost and PCB area in compact variable-frequency drive and BLDC designs.
Architecturally, the PIC24EP128MC206 combines a modified Harvard bus with DSP engine instructions, providing deterministic interrupt latency and high-throughput signal processing. The integrated motor-control PWM supports center-aligned, complementary, and edge-aligned modes with programmable dead-time insertion, eliminating software overhead typically required for three-phase inverter control.
Typical applications include sensorless and sensored BLDC/PMSM motor drives, three-phase AC induction motor controllers, field-oriented control (FOC) drives for pumps and fans, servo control, and industrial automation. Its 70 MIPS throughput is well-matched to mid-frequency FOC loops (typically 8-32 kHz PWM).
When designing with this device, ensure proper decoupling on VDDCORE and use the exposed pad of the VQFN package as the primary thermal and electrical ground return. Program firmware via ICSP or JTAG through the dedicated programming pins; verify voltage levels on MCLR for in-circuit programming reliability.
This page synthesizes drop-in alternatives, distributor pricing, and engineering design notes not consolidated in the manufacturer datasheet, complementing Microchip's PIC24EP128MC206 family reference manual with practical selection guidance.
Alternativas directas para PIC24EP128MC206-I/MR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC24EP128MC206-I/MR (mismo factor de forma y huella) — difiere en Package, Operating Temperature, ADC, Core, RAM.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC24EP128MC206-E/MR
✅ Sustitución directa✓ En stock
$4.22 / unidad
Ver hoja de datos →PIC24EP128MC206-I/PT
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC24EP128GP206-I/MR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC24EP256MC206-I/MR
✅ Sustitución directa✓ En stock
$6.39 / unidad
Ver hoja de datos →DSPIC33EP128MC206-I/MR
✅ Sustitución directa✓ En stock
$0.13 / unidad
Ver hoja de datos →PIC24EP128MC206-I/MR Valores máximos y características eléctricas
| Core Architecture | PIC24E 16-bit dsPIC enhanced |
| CPU Speed | 70 MIPS (70 MHz) |
| Program Memory | 128 KB Flash (43K x 24) |
| Data RAM | 16 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| Temperatura de funcionamiento | -40C to +85C (Industrial) |
| Encapsulado | 64-pin VQFN (MR) 9x9 mm with EP |
| Tipo de montaje | Surface Mount |
| On-Chip Op-Amps | Yes (internal) |
| Estado RoHS | Compliant |
| Lead-Free | Yes |
| Estilo de montaje | SMD/SMT |
Configuración de pines de PIC24EP128MC206-I/MR
| Pin 1 | RP15/PWM1L — PWM1 low-side output / remappable I/O |
| Pin 2 | RP14/PWM1H — PWM1 high-side output / remappable I/O |
| Pin 3 | RP13/PWM2L — PWM2 low-side output / remappable I/O |
| Pin 4 | RP12/PWM2H — PWM2 high-side output / remappable I/O |
| Pin 5 | RP11/PWM3L — PWM3 low-side output / remappable I/O |
| Pin 6 | RP10/PWM3H — PWM3 high-side output / remappable I/O |
| Pin 7 | RP9 — Remappable I/O |
| Pin 8 | RP8 — Remappable I/O |
| Pin 9 | VDD — Supply voltage (3.0-3.6 V) |
| Pin 10 | VSS — Digital ground |
| Pin 11 | OSC1 — Crystal/oscillator input |
| Pin 12 | OSC2 — Crystal/oscillator output |
| Pin 13 | MCLR — Master clear (reset) input |
| Pin 14 | PGEC1 — ICSP programming clock |
| Pin 15 | PGED1 — ICSP programming data |
| Pin 16 | AVDD — Analog supply voltage |
| Pin 17 | AVSS — Analog ground |
| Pin 18 | AN0 — Analog input 0 |
| Pin 19 | AN1 — Analog input 1 |
| Pin 20 | AN2 — Analog input 2 |
| Pin 21 | AN3 — Analog input 3 |
| Pin 22 | AN4 — Analog input 4 |
| Pin 23 | AN5 — Analog input 5 |
| Pin 24 | AN6 — Analog input 6 |
| Pin 25 | AN7 — Analog input 7 |
| Pin 26 | AN8 — Analog input 8 |
| Pin 27 | AN9 — Analog input 9 |
| Pin 28 | AN10 — Analog input 10 |
| Pin 29 | AN11 — Analog input 11 |
| Pin 30 | AN12 — Analog input 12 |
| Pin 31 | AN13 — Analog input 13 |
| Pin 32 | AN14 — Analog input 14 |
| Pin 33 | AN15 — Analog input 15 |
| Pin 34 | VDDCORE — Internal core voltage output (1.8 V) |
| Pin 35 | ENVREG — Voltage regulator enable |
| Pin 36 | VSS — Digital ground |
| Pin 37 | RP0 — Remappable I/O |
| Pin 38 | RP1 — Remappable I/O |
| Pin 39 | RP2 — Remappable I/O |
| Pin 40 | RP3 — Remappable I/O |
| Pin 41 | RP4 — Remappable I/O |
| Pin 42 | RP5 — Remappable I/O |
| Pin 43 | RP6 — Remappable I/O |
| Pin 44 | RP7 — Remappable I/O |
| Pin 45 | U1RX — UART1 receive |
| Pin 46 | U1TX — UART1 transmit |
| Pin 47 | SDA1 — I2C1 data |
| Pin 48 | SCL1 — I2C1 clock |
| Pin 49 | SDO1 — SPI1 data out |
| Pin 50 | SDI1 — SPI1 data in |
| Pin 51 | SCK1 — SPI1 clock |
| Pin 52 | SS1 — SPI1 slave select |
| Pin 53 | RP16/PWM4L — PWM4 low-side / remappable I/O |
| Pin 54 | RP17/PWM4H — PWM4 high-side / remappable I/O |
| Pin 55 | RP18/PWM5L — PWM5 low-side / remappable I/O |
| Pin 56 | RP19/PWM5H — PWM5 high-side / remappable I/O |
| Pin 57 | RP20 — Remappable I/O |
| Pin 58 | RP21 — Remappable I/O |
| Pin 59 | RP22 — Remappable I/O |
| Pin 60 | RP23 — Remappable I/O |
| Pin 61 | RP24 — Remappable I/O |
| Pin 62 | RP25 — Remappable I/O |
| Pin 63 | TMS — JTAG test mode select |
| Pin 64 | TCK — JTAG test clock |
Aplicaciones típicas
PIC24EP128MC206-I/MR es adecuado para 6 aplicacións: Sensorless BLDC Motor Drive, Field-Oriented Control (FOC) PMSM Drive, Industrial Servo Control, Variable Frequency Drive (VFD) for Pumps and Fans, Cordless Power Tool Motor Controller, Robotics and CNC Spindle Control.
Sensorless BLDC Motor Drive
The PIC24EP128MC206-I/MR's 70 MIPS core and on-chip op-amps make it a strong fit for sensorless BLDC motor drives. The integrated high-resolution motor-control PWM supports 20-40 kHz switching with programmable dead-time insertion, while the on-chip op-amps condition back-EMF signals without external analog front-end. Placed between the 3.3 V logic supply and the gate-driver stage, the MCU executes BEMF zero-crossing detection in software with deterministic interrupt latency. Microchip application note AN1078 provides a complete sensorless FOC reference design targeting this MCU family, reducing firmware development time for variable-frequency drive applications.
Recomendado
Field-Oriented Control (FOC) PMSM Drive
The PIC24EP128MC206-I/MR excels in field-oriented control of permanent magnet synchronous motors (PMSM) where Clarke-Park transforms, PID loops, and SVM modulation demand 70 MIPS of deterministic throughput. Its 128 KB Flash fits complete FOC parameter tables and observer algorithms, while 16 KB RAM holds per-cycle working variables. On-chip op-amps directly amplify current-shunt signals before the ADC, removing the need for external instrumentation amplifiers. The MCU generates complementary center-aligned PWM with dead-time control for the three-phase inverter, enabling smooth torque and speed control down to near-zero RPM with full torque.
Recomendado
Industrial Servo Control
For industrial servo drives, the PIC24EP128MC206-I/MR provides the real-time response required for position, velocity, and current loop closure at multi-kHz rates. The 70 MIPS core executes cascaded PID controllers with minimal latency, and the integrated Peripheral Trigger Generator (PTG) coordinates deterministic ADC sampling synchronized to PWM edges for accurate current measurement. Industrial-grade -40C to +85C temperature rating suits factory-floor deployment. The device supports quadrature encoder interface (QEI) for absolute position feedback from incremental encoders used in CNC machines and robotics.
Recomendado
Variable Frequency Drive (VFD) for Pumps and Fans
The PIC24EP128MC206-I/MR fits VFD applications for pumps, fans, and HVAC blowers requiring energy-efficient variable-speed control. Its motor-control PWM generates the variable-frequency waveforms needed to drive three-phase induction motors or BLDC motors at speeds from a few hundred RPM to several thousand RPM. With 128 KB Flash and 16 KB RAM, the MCU runs V/Hz or sensorless FOC algorithms with thermal protection and fault handling. The on-chip op-amps directly sense DC bus current and voltage for closed-loop control, while the ADC's simultaneous sampling ensures accurate measurement even at high PWM duty cycles.
Recomendado
Cordless Power Tool Motor Controller
The PIC24EP128MC206-I/MR's compact 64-pin VQFN package and integrated motor-control peripherals suit cordless power tools - drills, impact drivers, and cordless saws - where PCB area is constrained. The 70 MIPS core delivers responsive torque and speed control, while on-chip op-amps sense brushless motor phase currents for closed-loop commutation. Operating from a single 3.3 V supply derived from the tool's Li-ion battery pack, the MCU interfaces directly to gate drivers and MOSFET bridges. Industrial-grade temperature rating ensures reliable operation across cold outdoor and hot-loaded conditions typical of power-tool duty cycles.
Recomendado
Robotics and CNC Spindle Control
The PIC24EP128MC206-I/MR is a strong choice for robotics spindle and small CNC stepper/servo controllers where 70 MIPS handles multi-axis trajectory planning plus real-time motor commutation. Its 64-pin VQFN footprint keeps the board compact for tight robotic enclosures, and the 128 KB Flash stores motion profiles, G-code interpreters, or stepper/servo sequences. The Quadrature Encoder Interface (QEI) reads feedback from servo motors, and the on-chip op-amps can condition reference voltages or sensor signals. Industrial -40C to +85C operation tolerates factory environments, and JTAG/ICSP interfaces support field firmware updates for evolving control algorithms.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC24EP128MC206-I/MR — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC24EP128MC206-E/MR | PIC24EP128MC206-I/PT | PIC24EP128GP206-I/MR | PIC24EP256MC206-I/MR | dsPIC33EP128MC206-I/MR |
|---|---|---|---|---|---|---|
| Package | 64-pin VQFN (MR) 9x9 mm | 64-pin VQFN (MR) 9x9 mm | 64-pin TQFP (PT) 10x10 mm | 64-pin VQFN (MR) 9x9 mm | 64-pin VQFN (MR) 9x9 mm | 64-pin VQFN (MR) 9x9 mm |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | PIC24E 16-bit 70 MIPS | PIC24E 16-bit 70 MIPS | PIC24E 16-bit 70 MIPS | PIC24E 16-bit 70 MIPS | PIC24E 16-bit 70 MIPS | dsPIC33E 16-bit 70 MIPS DSP |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB | 128 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 32 KB | 16 KB |
| Motor-Control PWM | Yes (dedicated) | Yes (dedicated) | Yes (dedicated) | No (general-purpose OC) | Yes (dedicated) | Yes (dedicated) |
| On-Chip Op-Amps | Yes | Yes | Yes | Yes | Yes | Yes |
| Temperature Grade | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| DSP Engine | No | No | No | No | No | Yes (single-cycle MAC) |
Diferenciadores clave
- Integrated on-chip op-amps for current sensing (frente a PIC24EP128GP206)
- Dedicated motor-control PWM with hardware dead-time (frente a PIC24EP128GP206)
- Pin-compatible upgrade path to DSP engine (frente a dsPIC33EP128MC206)
- Extended temperature variant available (frente a PIC24EP128MC206-I/PT)
Notas de diseño
The 64-pin VQFN (MR) 9x9 mm package has an exposed thermal pad that MUST be soldered to the PCB ground plane for proper thermal dissipation and electrical grounding. Use a thermal via array (typically 9-16 vias in a 3x3 to 4x4 grid) under the EP to conduct heat into inner copper layers. Estimated: with 9 thermal vias (0.3 mm drill, 1 oz copper plating), the resulting junction-to-ambient thermal resistance (theta_JA) drops to approximately 28-32 C/W, well within the device's safe operating area for motor-drive applications.
The PIC24EP128MC206-I/MR integrates a 1.8 V core voltage regulator from the 3.3 V VDD supply; place a 10 uF X7R ceramic capacitor on the VDDCORE pin and a 0.1 uF decoupling cap close to VDD. The ENVREG pin must be tied to VDD to enable the internal regulator. Failure to provide proper VDDCORE decoupling results in core voltage noise, causing erratic operation or Flash programming failures during ICSP. Estimated: at 70 MIPS, the core current consumption is approximately 30-45 mA, requiring low-ESR ceramic decoupling.
When using ICSP for in-circuit programming, ensure MCLR is pulled up through a resistor (typically 10 kohm) and never left floating. PGC and PGD pins must be accessible without interfering with the application circuit. For JTAG debug, verify TMS and TCK pin mapping on the 64-pin VQFN footprint - on this package both programming and debug interfaces share pins. Always apply Microchip's recommended power-on sequence: VDD ramps up before MCLR rises above Vih to ensure clean reset initialization.
Motor-drive applications generate significant EMI from high-current switching nodes. Place the MCU at least 25 mm away from the inverter power stage, and use ground-plane partitioning to isolate analog (AVDD/AVSS) from digital grounds, joining them only at one point near the MCU. The analog input pins (AN0-AN15) used for current sensing should be routed with differential pairs and surrounded by ground copper for noise rejection. Estimated: 4-layer PCB with proper stackup reduces ADC noise by 8-12 dB compared to 2-layer boards.
Información de cumplimiento
RoHS compliant per Microchip product declaration. Lead-free VQFN-64 package uses matte-tin finish. Industrial temperature grade (-40C to +85C); not AEC-Q100 qualified. Choose -E/MR variant for extended temperature, or dsPIC33EP MCUs for automotive.
