PIC24FV16KM102-I/SO - 16-Bit 32MHz XLP MCU | Microchip
N.º de pieza: PIC24FV16KM102-I/SO ✓ ActivoPIC24FV16KM102-I/SO Descripción general
A low-power 16-bit microcontroller combines a general-purpose embedded CPU with programmable peripherals on one integrated circuit. The PIC24FV family belongs to the PIC24F family of 16-bit Flash microcontrollers and targets cost-sensitive, low-pin-count control systems. Its nanoWatt XLP design, configurable logic cells, and flexible capture, compare, and PWM resources allow compact systems to handle control, measurement, communication, and low-power standby functions.
Key resources include 16 KB of Flash organized as 5.5K × 24 words, 1 KB of data RAM, 512 bytes of EEPROM, a 12-bit analog-to-digital converter, comparators, I2C, UART, PWM, and MCCP/SCCP peripherals. The operating-voltage range of 2.0 V to 5.5 V permits use in both 3 V and 5 V equipment, while the 32 MHz core provides additional performance headroom for protocol handling and responsive control tasks.
The programmable peripherals reduce the need for external components. The 12-bit ADC supports analog sensor acquisition, comparators can provide simple threshold detection, and configurable logic cells can implement small amounts of hardware-like decision logic. I2C and UART support sensor, transceiver, and host-controller connectivity, while PWM outputs are useful for motor control, dimming, or general-purpose timing.
Typical applications include industrial sensor nodes, compact motor controllers, building and access-control equipment, low-power instrumentation, consumer appliances, and embedded control modules. The PIC24F16KM102-I/SO is particularly suitable when a 28-pin footprint, 16-bit processing, mixed 3 V/5 V compatibility, and low-power operation must be combined without using a larger microcontroller package.
For PCB implementation, preserve the manufacturer pin assignments for power, ground, programming, reset, and analog inputs. Place decoupling capacitors close to the supply pins and follow the recommended oscillator and analog-input layouts to prevent switching disturbances from degrading ADC measurements.
This product page combines the Microchip PIC24FV16KM102-I/SO specifications, same-package alternatives, application guidance, and design considerations to support component selection, firmware planning, PCB design, and sourcing decisions.
Alternativas directas para PIC24FV16KM102-I/SO — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC24FV16KM102-I/SO (mismo factor de forma y huella) — difiere en Package, ADC, Comparators, RoHS Status, Operating Voltage Range.
PIC24FV16KM102-E/SO
✅ Sustitución directaConsulte el precio
Ver hoja de datos →PIC24F16KM102-I/SO
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →PIC24FV16KM204-I/SO
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
PIC24FV32KM106-I/SO
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
PIC24FV32KM204-I/SO
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
PIC24FV16KM102-I/SO Valores máximos y características eléctricas
| Architecture | 16-bit PIC microcontroller |
| CPU Maximum Frequency | 32 MHz |
| Flash Program Memory | 16 KB |
| Program Memory Organization | 5.5K × 24 words |
| Data RAM | 1 KB |
| EEPROM | 512 bytes |
| ADC Resolution | 12 bits |
| Operating Voltage Range | 2.0 V to 5.5 V |
| Supported Supply Class | 3 V and 5 V |
| Serial Interfaces | I2C and UART |
| Timer and PWM Resources | MCCP/SCCP, Capture/Compare, and PWM |
| Analog Resources | 12-bit ADC and comparators |
| Programmable Logic | Configurable Logic Cell |
| Power Technology | nanoWatt XLP |
| Encapsulado | 28-pin SOIC, 7.50 mm width |
| Tipo de montaje | Surface mount |
| Industrial Temperature Grade | -40 °C to +85 °C |
| Estado RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not applicable |
Guía de configuración de pines de PIC24FV16KM102-I/SO 28-pin soic, 7.50 mm width
Configuración de pines para PIC24FV16KM102-I/SO (encapsulado 28-pin soic, 7.50 mm width). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para PIC24FV16KM102-I/SO.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PIC24FV16KM102-I/SO es adecuado para 6 aplicacións: Industrial Sensor Nodes, Compact Motor Control, Building Access Control, Low-Power Instrumentation, Consumer Appliance Control, LED Lighting Control.
Industrial Sensor Nodes
The PIC24FV16KM102-I/SO fits compact industrial sensor nodes that measure analog inputs and communicate over a wired digital interface. Its 12-bit ADC acquires sensor signals, while the 2.0 V to 5.5 V operating range supports both 3 V and 5 V field equipment. The 16-bit architecture and 32 MHz operating frequency provide responsive control and protocol processing without requiring a larger package. I2C can connect digital sensors, UART can link the node to a gateway, and comparators can provide fast threshold events. With 16 KB of Flash, 1 KB of RAM, and 512 bytes of EEPROM, firmware should reserve RAM carefully for buffers and interrupt context. The -40 °C to +85 °C industrial grade is appropriate for controlled indoor or protected outdoor installations.
Recomendado
Compact Motor Control
The PIC24FV16KM102-I/SO is suitable for compact motor-control modules that need flexible timing and mixed analog and digital functions. Its MCCP/SCCP and PWM resources can generate control signals for fans, pumps, valves, and small stepper systems, while the 12-bit ADC can monitor current or position-related feedback. The 32 MHz core leaves useful processing headroom for closed-loop calculations and fault handling. A 5 V implementation can use the full 2.0 V to 5.5 V device range, although motor supply noise and inductive transients require careful grounding. The 28-pin SOIC footprint supports board revisions that need more I/O than an 8- or 14-pin MCU. Keep switching devices away from the ADC and MCU supply pins, and provide local filtering or bulk decoupling at the power-entry point.
Recomendado
Building Access Control
The PIC24FV16KM102-I/SO can serve as the controller in compact access-control readers, keypads, intercoms, and electronic locks. Its UART supports connection to a host or external communication module, while I2C can connect secure authentication or sensor components. GPIO and configurable logic cells can manage key scanning, indicator control, and request-to-exit inputs without excessive software overhead. The 2.0 V to 5.5 V operating range permits use with 3 V and 5 V access-control hardware, and 512 bytes of EEPROM is useful for limited nonvolatile configuration data. The industrial grade supports the -40 °C to +85 °C range. Firmware should use secure update and authentication practices because physical access-control products require tamper resistance as well as reliable real-time I/O handling.
Recomendado
Low-Power Instrumentation
The PIC24FV16KM102-I/SO is well matched to low-power instrumentation because the PIC24FV family emphasizes nanoWatt XLP operation and supports a broad 2.0 V to 5.5 V supply range. Engineers can use the 12-bit ADC for pressure, temperature, level, or current measurements and comparators for threshold detection. UART and I2C support laboratory instruments and data-acquisition modules, while the 32 MHz processor can manage calibration, filtering, and communications. The 1 KB RAM limitation favors compact buffers and careful interrupt design, and the 16 KB Flash budget must include boot, application, and configuration code. For battery-operated instruments, calculate the average current from active-mode time, standby time, and peripheral shutdown states rather than relying only on the maximum clock frequency.
Recomendado
Consumer Appliance Control
The PIC24FV16KM102-I/SO supports compact consumer-appliance controls that combine analog sensing, communication, and low-power behavior. A 12-bit ADC can monitor temperature, level, or switch feedback, while PWM can control indicators, valves, or small drive stages. UART and I2C provide flexible connections to display, sensor, or communication modules. Its 32 MHz performance supports responsive menu handling, state-machine control, and communication tasks, while 16 KB of Flash constrains code size and favors modular firmware. The 5 V-capable supply range simplifies integration with common appliance logic, although mains-connected products need galvanic isolation and appropriately rated switching components. Keep the analog ground and supply paths compact, and validate the completed controller for EMC and surge requirements rather than assuming microcontroller-level compliance covers the end product.
Recomendado
LED Lighting Control
The PIC24FV16KM102-I/SO can drive compact LED-lighting and indication systems where dimming, status sequencing, and analog monitoring are required. PWM resources provide proportional control of LED drive signals, and the 12-bit ADC can supervise current, temperature, or supply condition when suitable sensing hardware is present. I2C can connect an LED driver or display controller, while UART provides a commissioning or remote-control path. The MCU's 32 MHz operation allows dimming updates and fault management without occupying most controller capacity. Its 2.0 V to 5.5 V range supports 3 V and 5 V systems, and the 28-pin SOIC offers more I/O than a very small controller package. For high-current lighting, keep the switching stage separate from the MCU and route return currents away from sensitive analog and ground pins.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC24FV16KM102-I/SO — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC24FV16KM102-E/SO | PIC24F16KM102-I/SO | PIC24FV16KM204-I/SO | PIC24FV32KM106-I/SO | PIC24FV32KM204-I/SO |
|---|---|---|---|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | 16-bit PIC | 16-bit PIC | 16-bit PIC | 16-bit PIC | 16-bit PIC | 16-bit PIC |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Program Memory | 16 KB | 16 KB | 16 KB | 32 KB | 32 KB | 32 KB |
| ADC Resolution | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits |
Diferenciadores clave
- Maintains the same principal memory and clock configuration as the documented grade alternative (frente a PIC24FV16KM102-E/SO)
- Provides 5 V compatibility through the PIC24FV supply range (frente a PIC24F16KM102-I/SO)
- Provides additional firmware headroom in same-package family options (frente a PIC24FV16KM204-I/SO)
- Combines 16-bit processing with integrated mixed-signal peripherals (frente a PIC24FV32KM106-I/SO)
Notas de diseño
Place the required decoupling capacitors immediately adjacent to the VDD and VSS pins, with short ground returns to avoid inductance in the supply loop. Keep analog and digital return paths disciplined when the 12-bit ADC is active. The PIC24FV16KM102-I/SO accepts 2.0 V to 5.5 V, but the selected supply must also satisfy every connected peripheral, pull-up, and communication device.
Use the manufacturer pin-description table to assign every 28-pin SOIC connection and confirm the programming, reset, oscillator, and analog pins before releasing the PCB footprint. Keep sensitive analog inputs away from PWM outputs, clock signals, and high-current return paths. Route communication traces away from antenna and switching-power regions when the module also handles radio or inductive loads.
The 16 KB Flash and 1 KB RAM limits require disciplined firmware sizing. Include startup code, interrupt vectors, communication buffers, and library overhead in the memory budget rather than estimating only application code. Interrupt handlers should avoid unnecessary blocking operations, and EEPROM writes should be distributed so they do not create unacceptable control-loop latency.
A suffix change does not guarantee that every device function is interchangeable for every application. Before using PIC24FV16KM102-E/SO or another family member, compare the temperature grade, supply range, peripheral pins, oscillator options, programming configuration, and package drawing. The alternatives in this table share a 28-pin SOIC footprint, but production substitution still requires a complete pin and feature review.
Información de cumplimiento
The component is a general-purpose industrial-temperature PIC microcontroller rather than an AEC-Q100 automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.