PIC24FV16KM204-I/PT - 16-bit XLP MCU, 32MHz, 16KB Flash | Microchip
N.º de pieza: PIC24FV16KM204-I/PT ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $2.41 | $2,41 |
| 10 | $2.17 | $21,70 |
| 100 | $1.93 | $193,00 |
| 500 | $1.74 | $870,00 |
| 1.000 | $1.59 | $1.590,00 |
PIC24FV16KM204-I/PT Descripción general
A PIC microcontroller (MCU) is a compact single-chip computer based on Microchip's PIC® RISC architecture, integrating a CPU core, non-volatile program memory, RAM, and a fixed set of peripherals. PIC MCUs sit inside the broader microcontroller hierarchy as part of the embedded-computing family that bridges discrete logic and full microprocessors; the PIC24F sub-family is the 16-bit segment targeted at low-power, mixed-signal applications. The 32 MHz CPU delivers up to 16 MIPS, sufficient for sensor processing, motor control loops, and human-interface tasks while retaining deterministic interrupt response.
Key differentiating features include on-chip op-amps (configurable as amplifiers, buffers, or programmable-gain stages), an 8-bit DAC for bias or setpoint generation, a configurable logic cell (CLC) that implements combinational/sequential logic without external gates, and CTMU charge-time measurement for capacitive touch. Multiple serial interfaces (UART, SPI, I²C) and Capture/Compare/PWM modules support motor, LED, and timing applications. Hardware Real-Time Clock and Calendar (RTCC) with battery backup mode is integrated for time-keeping while the core is asleep.
The architecture combines a Harvard-style 16-bit datapath with peripheral pin-select (PPS), allowing flexible pin assignment to digital peripherals and simplifying PCB routing. The 44-TQFP package provides ample I/O for parallel displays, keypads, and sensor arrays while remaining hand-solderable. The XLP design uses nanoWatt XLP technology to achieve sub-microamp deep-sleep currents, which is critical for battery-powered IoT endpoints that must survive multi-year deployments on a single cell.
Typical applications include battery-powered sensor nodes, low-cost touch-interface front panels, portable medical monitoring accessories, consumer white-goods user-interface controllers, and LED lighting control. The integrated analog peripherals reduce BOM cost by eliminating external op-amps and comparators in many mixed-signal designs. The device is also well-suited to industrial HMI panels, electronic shelf labels, and remote controls where small pin count and integrated analog are advantageous.
When designing with the PIC24FV16KM204-I/PT, take advantage of the XLP sleep modes by leaving peripheral clocks gated when unused, and use the CLC module to implement glue logic in firmware-free hardware. Verify in-system programming (ICSP) pin access on the PCB for field firmware updates, and reserve adequate decoupling (100 nF + bulk) within 5 mm of the supply pins to keep ADC noise low. The integrated op-amps share pins with the ADC and DAC, so the pin-out diagram should be reviewed before signal-chain layout.
Alternativas directas para PIC24FV16KM204-I/PT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC24FV16KM204-I/PT (mismo factor de forma y huella) — difiere en ADC, Core Architecture, Package, DAC, Operational Amplifiers.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC24FV16KM204T-I/PT
✅ Sustitución directa✓ En stock
$2.39 / unidad
Ver hoja de datos →PIC24F16KM204-I/PT
✅ Sustitución directa✓ En stock
$2.05 / unidad
Ver hoja de datos →PIC24FV08KM204-I/PT
✅ Sustitución directa✓ En stock
$1.94 / unidad
Ver hoja de datos →PIC24FV16KM204-I/PT Valores máximos y características eléctricas
| Family | PIC® XLP™ 24F |
| Core Architecture | 16-bit PIC RISC |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 16 KB (5.5K x 24 words) |
| Data Memory (SRAM) | 2 KB |
| Operating Voltage Range | 2.0 V to 5.5 V |
| ADC | 12-bit, multiple channels |
| DAC | 8-bit, on-chip |
| Operational Amplifiers | On-chip op-amps (configurable) |
| Comparators | On-chip |
| Configurable Logic Cell (CLC) | Yes |
| PWM / CCP Modules | Capture/Compare/PWM |
| Communication Interfaces | UART, SPI, I²C |
| RTCC (Real-Time Clock) | Yes, with battery backup |
| Encapsulado | 44-TQFP (10x10 mm) |
| Temperatura de funcionamiento | -40 °C to +85 °C (industrial) |
| Low-Power Technology | eXtreme Low Power (XLP) nanoWatt |
| Tipo de montaje | Surface Mount |
| Estado RoHS | Compliant |
Configuración de pines de PIC24FV16KM204-I/PT
| Pin 1 | SDA2/RP9/CN21/PMD3/RB9 — I²C2 data / remappable peripheral / change notification |
| Pin 2 | RP8/CN20/PMD2/RB8 — Remappable peripheral / change notification |
| Pin 3 | AN11/C1IN3-/RP7/PMD1/RB7 — Analog input 11 / comparator input / remappable peripheral |
| Pin 4 | AN10/C1IN2-/RP6/PMD0/RB6 — Analog input 10 / comparator input / remappable peripheral |
| Pin 5 | AN9/C2IN3-/RP5/CTED1/PMRD/RB5 — Analog input 9 / comparator input / remappable peripheral |
| Pin 6 | AN8/C2IN2-/RP4/CTED2/RB4 — Analog input 8 / comparator input / remappable peripheral |
| Pin 7 | AN7/C2IN1-/RP3/PMWR/RB3 — Analog input 7 / comparator input / remappable peripheral |
| Pin 8 | AN6/C2IN1+/RP2/PMCS1/RB2 — Analog input 6 / comparator input / remappable peripheral |
| Pin 9 | AN5/C1IN1-/C2IN4-/RP1/PMCS2/RB1 — Analog input 5 / comparator input / remappable peripheral |
| Pin 10 | AN4/C1IN1+/RP0/PMCS2/RB0 — Analog input 4 / comparator input / remappable peripheral |
| Pin 11 | AVDD — Analog supply voltage |
| Pin 12 | AVSS — Analog ground |
| Pin 13 | OSC1/CLKI/RA3 — Crystal oscillator input / external clock input |
| Pin 14 | OSC2/CLKO/RA2 — Crystal oscillator output / clock output |
| Pin 15 | TDO/RA1 — Test data output / port pin |
| Pin 16 | TMS/RA0 — Test mode select / port pin |
| Pin 17 | VCAP — Internal voltage regulator decoupling capacitor |
| Pin 18 | RA4/PMD5 — Port pin / parallel master data |
| Pin 19 | RA5/PMD4 — Port pin / parallel master data |
| Pin 20 | VDD — Digital supply voltage |
| Pin 21 | VSS — Digital ground |
| Pin 22 | RA9/T1CK — Port pin / Timer1 clock |
| Pin 23 | RA10/RTCC — Port pin / RTCC output |
| Pin 24 | RA7/IC1/T2CK — Port pin / input capture / Timer2 clock |
| Pin 25 | RA6/OC1 — Port pin / output compare |
| Pin 26 | RC9/RX2/U2CTS — UART2 RX / UART2 clear-to-send |
| Pin 27 | RC8/TX2/U2RTS — UART2 TX / UART2 request-to-send |
| Pin 28 | RC7/RX1 — UART1 RX |
| Pin 29 | RC6/TX1 — UART1 TX |
| Pin 30 | RC5/PMD7 — Port pin / parallel master data |
| Pin 31 | RC4/PMD6 — Port pin / parallel master data |
| Pin 32 | RC3/SCK1/PMWR — SPI1 clock / parallel master write |
| Pin 33 | RC2/SDI1/PMD0 — SPI1 data in / parallel master data |
| Pin 34 | RC1/SDO1 — SPI1 data out |
| Pin 35 | RC0/SCL1 — I²C1 clock |
| Pin 36 | SDA1/RA8 — I²C1 data / port pin |
| Pin 37 | RE9/AN21 — Port pin / analog input 21 |
| Pin 38 | RE8/AN20 — Port pin / analog input 20 |
| Pin 39 | RE7/AN19 — Port pin / analog input 19 |
| Pin 40 | RE6/AN18 — Port pin / analog input 18 |
| Pin 41 | RE5/AN17 — Port pin / analog input 17 |
| Pin 42 | RE4/AN16 — Port pin / analog input 16 |
| Pin 43 | RE3/AN15 — Port pin / analog input 15 |
| Pin 44 | RE2/AN14/PMCS1 — Port pin / analog input 14 / parallel master chip select |
Aplicaciones típicas
PIC24FV16KM204-I/PT es adecuado para 7 aplicacións: Battery-Powered IoT Sensor Node, Capacitive Touch User Interface, Industrial Human-Machine Interface (HMI) Panel, Portable Medical Monitoring Accessory, LED Lighting Controller, Remote Control / Consumer White-Goods UI, Electronic Shelf Label / Smart Retail.
Battery-Powered IoT Sensor Node
The PIC24FV16KM204-I/PT is well-suited to battery-powered IoT sensor endpoints because its nanoWatt XLP technology achieves sub-microamp deep-sleep current, while the 16 KB Flash and 2 KB SRAM provide ample room for sensor-fusion and edge-processing firmware. The 12-bit ADC pairs directly with on-chip op-amps to condition low-level sensor outputs without external analog. Operating from 2.0 V to 5.5 V supports both 3.3 V coin-cell and 5 V USB/bus-powered configurations. UART/SPI/I²C peripherals integrate radios, displays, or expansion EEPROM. Designers typically duty-cycle the MCU with sleep/wake timers and use RTCC for time-stamping while core is asleep.
Recomendado
Capacitive Touch User Interface
The CTMU peripheral and 12-bit ADC allow the PIC24FV16KM204-I/PT to implement capacitive-touch sensing via charge-time measurement, eliminating dedicated touch-controller ICs. The on-chip op-amps and comparators condition sensor electrodes, while the CLC (configurable logic cell) handles wake-from-touch events without CPU involvement, extending battery life. The 8-bit DAC provides reference voltages for haptics or LED backlight intensity. Surface-mount 44-TQFP supports compact panel designs, and PPS allows flexible sensor pin routing on the PCB.
Recomendado
Industrial Human-Machine Interface (HMI) Panel
The PIC24FV16KM204-I/PT drives small industrial HMI panels thanks to its 16 MIPS throughput for menu/graphics handling and its integrated op-amps for analog signal conditioning. The 12-bit ADC reads 4-20 mA analog sensor inputs while PWM outputs control backlight or buzzer intensity. CLC implements safety interlock logic without firmware, and Capture/Compare modules drive stepper motor dials. The 44-TQFP industrial-grade part operates from -40 °C to +85 °C, suiting factory-floor cabinets. UART and I²C ports integrate Modbus RTU or I/O expanders.
Recomendado
Portable Medical Monitoring Accessory
The PIC24FV16KM204-I/PT is a strong fit for portable medical accessories like pulse-oximeter probes and pill-dispenser controllers because its XLP sleep modes extend battery life to multi-month deployments. The on-chip op-amps amplify photodiode or biopotential signals at the analog front-end, and the 12-bit ADC digitizes them with adequate resolution for vitals monitoring. RTCC timestamps measurements while the core sleeps, and the wide 2.0 V to 5.5 V supply range accommodates Li-ion or coin-cell packs. The integrated analog reduces BOM cost in cost-sensitive consumer medical products.
Recomendado
LED Lighting Controller
The PIC24FV16KM204-I/PT controls multi-channel LED fixtures via its Capture/Compare/PWM modules, which generate up to 16-bit PWM resolution for smooth dimming and color mixing. The 32 MHz CPU computes color-temperature mixing algorithms in real time, while the 8-bit DAC biases constant-current drivers or sets reference levels for analog dimming. CLC implements over-temperature foldback logic with thermistor inputs, and the wide VDD range accepts 5 V or 12 V bus systems. Surface-mount TQFP simplifies reflow on aluminum-PCB lamp modules.
Recomendado
Remote Control / Consumer White-Goods UI
The PIC24FV16KM204-I/PT serves as the main controller in IR/RF remote controls and white-goods UI panels thanks to its low BOM, low power, and integrated peripherals. CLC implements IR modulation/demodulation in hardware, freeing CPU for button-scanning and battery management. The 12-bit ADC reads battery voltage and thermistor inputs, while PWM drives status LEDs and buzzers. The 5 V tolerance and 44-TQFP footprint suit hand-held plastic enclosures with tactile keypads, and the eXtreme low-power sleep modes extend battery life to multi-year standby.
Recomendado
Electronic Shelf Label / Smart Retail
The PIC24FV16KM204-I/PT drives electronic shelf labels (ESL) and smart retail displays thanks to its sub-microamp XLP sleep current, which preserves coin-cell battery life over multi-year deployments. The on-chip op-amps drive segmented or active-matrix e-paper displays, while the 8-bit DAC sets contrast bias. UART/SPI ports integrate low-power 2.4 GHz or sub-GHz wireless transceivers for back-haul updates. CLC handles wake-on-radio events without CPU intervention, and the wide VDD range accepts 3 V coin cells directly.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC24FV16KM204-I/PT — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC24FV16KM204T-I/PT | PIC24F16KM204-I/PT | PIC24FV08KM204-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Flash Program Memory | 16 KB | 16 KB | 16 KB | 8 KB |
| SRAM | 2 KB | 2 KB | 2 KB | 2 KB |
| Maximum CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| Operating Voltage Range | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 5 V only | 2.0 V to 5.5 V |
| On-chip Op-amps | Yes | Yes | Yes | Yes |
| Packaging Format | Tray | Tape & Reel | Tray | Tray |
| Lifecycle Status | Active | Active | Active | Active |
Diferenciadores clave
- On-chip op-amps and 8-bit DAC eliminate external analog components (frente a PIC24FJ256GB108-I/PT)
- Wide 2.0 V to 5.5 V operating range (frente a PIC24F16KM204-I/PT)
- Higher Flash density than 8 KB family variants (frente a PIC24FV08KM204-I/PT)
Notas de diseño
Place a 100 nF ceramic decoupling capacitor within 5 mm of each VDD/AVDD pin and add a 10 µF bulk capacitor near the device for transient suppression. The PIC24FV16KM204-I/PT supports XLP sleep currents below 1 µA, but inadequate decoupling can force the voltage regulator into instability during wake transitions, dramatically raising average current. AVSS and VSS should be tied to a low-impedance ground plane with a single-point star connection near the IC. Verify that VCAP (pin 17) has its 10 µF ceramic capacitor placed as close as possible.
Use a continuous ground plane under and around the 44-TQFP footprint to provide a low-impedance return path for switching I/O currents and to reduce EMI. Route analog signals (ANx, op-amp pins) on a separate layer from digital switching traces, with the ground plane unbroken between them. Keep the ICSP clock and data traces (PGC1/PGD1) short and parallel, and avoid running them near switching signals. The PPS remappable peripheral pins should be routed to the PCB connector side first to simplify layout.
Do not skip the VCAP decoupling capacitor on pin 17; the internal LDO regulator requires this cap for stability and the device will not operate reliably without it. Avoid using the PIC24FV16KM204-I/PT as a 5 V-only replacement for the PIC24F16KM204-I/PT in battery applications — the 'F' variant lacks the low-voltage VDD range required for 2-3 V battery systems. Always configure unused I/O pins as outputs (driven low) or high-impedance inputs with weak pull-ups to minimize current leakage in XLP sleep modes.
When using the on-chip op-amps with the 12-bit ADC, add a small RC low-pass filter at the ADC input (typically 100 Ω + 100 nF) to limit input bandwidth and prevent aliasing of high-frequency noise. The 8-bit DAC output is not rail-to-rail; verify its output range against your load-driving requirements and add an external buffer op-amp if heavier drive is needed. The CTMU touch-sensing function requires calibrated timing — refer to Microchip AN1250 for proper CTMU configuration to ensure reliable capacitive-button detection.
Información de cumplimiento
RoHS compliant per DigiKey listing and Microchip product page. Operating temperature -40 °C to +85 °C (industrial grade), not AEC-Q100 qualified — for automotive applications use AEC-Q100 qualified PIC24 variants from Microchip's automotive catalog.