PIC24HJ64GP510T-I/PF - 16-bit MCU 64KB Flash 100-TQFP | Microchip
N.º de pieza: PIC24HJ64GP510T-I/PF ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $11.2 | $11,20 |
| 10 | $10.05 | $100,50 |
| 100 | $8.92 | $892,00 |
| 500 | $7.85 | $3.925,00 |
| 1.000 | $6.74 | $6.740,00 |
PIC24HJ64GP510T-I/PF Descripción general
A 16-bit PIC microcontroller is a microcontroller built around a 16-bit modified Harvard architecture, meaning it has separate program and data buses that allow simultaneous instruction fetch and data access. Within the broader taxonomy, a PIC24H device belongs to: microcontroller -> embedded MCU -> 16-bit MCU -> DSC-capable PIC -> power management & motor control family. The PIC24H architecture shares pin compatibility with the dsPIC33F Digital Signal Controller family, enabling software migration to DSP-capable variants without PCB rework.
Key features of the PIC24HJ64GP510T-I/PF include 16-channel 10-bit or 12-bit ADC, multiple UART/SPI/I2C peripherals, motor-control PWM with up to 8 channels, and a 16-bit wide data path that accelerates arithmetic and DSP-like operations compared with traditional 8-bit MCUs. The device operates from 3.0V to 3.6V and integrates a high-speed 40 MHz internal oscillator, on-chip debugger support via PGECx/PGEDx pairs, and a wide peripheral set optimized for real-time control.
The 100-pin TQFP footprint offers abundant I/O for multi-sensor or multi-axis motor control, while the 8KB RAM supports meaningful data buffers without external memory. Industrial-grade temperature range makes the part suitable for factory floor and outdoor enclosures.
Typical applications include AC induction motor control (V/F and vector), three-phase power inverters, industrial sensor aggregation, BLDC/PMSM motor drives, and general-purpose 16-bit embedded control. The PIC24H CPU delivers deterministic interrupt latency, critical for closed-loop control loops.
When designing with this part, ensure 3.3V analog supply decoupling is adequate and that the PGECx/PGEDx pair is routed symmetrically to the debug header. The 100-TQFP requires a 14x14 mm land pattern with 0.5 mm pitch.
This page consolidates verified distributor pricing, drop-in same-package alternatives, and design notes beyond what the manufacturer datasheet provides, supporting sourcing decisions for new designs and BOM risk mitigation.
Alternativas directas para PIC24HJ64GP510T-I/PF — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC24HJ64GP510T-I/PF (mismo factor de forma y huella) — difiere en ADC, Core Architecture, Timers, Package, Program Memory (Flash).
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC24HJ64GP510-I/PF
✅ Sustitución directa✓ En stock
$4.78 / unidad
Ver hoja de datos →PIC24HJ64GP510AT-I/PF
✅ Sustitución directa✓ En stock
$5.94 / unidad
Ver hoja de datos →PIC24HJ128GP510AT-I/PF
✅ Sustitución directa✓ En stock
$7.45 / unidad
Ver hoja de datos →PIC24HJ256GP610AT-I/PF
✅ Sustitución directa✓ En stock
$6.95 / unidad
Ver hoja de datos →PIC24HJ64GP210A-I/PF
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$5.78 / unidad
Ver hoja de datos →PIC24HJ64GP510T-I/PF Valores máximos y características eléctricas
| Core Architecture | PIC24H 16-bit modified Harvard |
| CPU Speed | 40 MIPs (40 MHz instruction rate) |
| Program Memory (Flash) | 64 KB (22K x 24) |
| Data RAM | 8 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| Rango de temperatura de funcionamiento | -40 C to +85 C (Industrial) |
| Encapsulado | 100-TQFP (14x14 mm), 0.5 mm pitch |
| Recuento de pines | 100 |
| Tipo de montaje | Surface Mount |
| Packaging Format | Tape and Reel (T suffix) |
| ADC | Multi-channel 10-bit (PIC24H typical) |
| Communication Peripherals | UART, SPI, I2C |
| PWM Channels | Up to 8 (motor control PWM) |
| On-chip Debug | ICD via PGECx/PGEDx pairs |
| Estado RoHS | Compliant |
Guía de configuración de pines de PIC24HJ64GP510T-I/PF 100-tqfp (14x14 mm), 0.5 mm pitch
Configuración de pines para PIC24HJ64GP510T-I/PF (encapsulado 100-tqfp (14x14 mm), 0.5 mm pitch). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para PIC24HJ64GP510T-I/PF.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PIC24HJ64GP510T-I/PF es adecuado para 7 aplicacións: Three-Phase AC Induction Motor Control, BLDC / PMSM Motor Drive with FOC, Industrial Sensor Aggregation Hub, Solar Inverter Power Stage Controller, Digital Power Conversion Control, Industrial Robotics Subsystem Controller, Uninterruptible Power Supply (UPS) Controller.
Three-Phase AC Induction Motor Control
The PIC24HJ64GP510T-I/PF's 40 MIPs 16-bit core and up to 8 PWM channels with programmable dead-band make it ideal for 3-phase AC induction motor drives. Its multi-channel ADC samples phase currents synchronously to PWM edges, enabling closed-loop V/F and sensorless vector control without external DSP. The 8 KB RAM supports reference-frame math and PI controller state, while the 100-TQFP package exposes enough I/O for encoder feedback, fault inputs, and CAN/SCI communication to a master controller. Compared with 8-bit MCUs at the same price, the PIC24H delivers deterministic interrupt latency and faster math throughput for tight torque loops.
Recomendado
BLDC / PMSM Motor Drive with FOC
For sensorless or encoder-based BLDC and PMSM motors, the PIC24HJ64GP510T-I/PF executes field-oriented control (FOC) algorithms with its 16-bit DSP-capable core. Its PWM module drives the inverter at up to 20 kHz with center-aligned timing, while the ADC triggers at PWM zero-crossing for clean current sampling. The 64 KB Flash stores state machines and startup routines, and the 8 KB RAM holds Park/Clarke transform variables. Industrial -40 C to +85 C temperature grade supports outdoor EV auxiliary pumps, fans, and e-bike drives without additional thermal conditioning.
Recomendado
Industrial Sensor Aggregation Hub
Aggregating multiple analog and digital sensors over SPI/I2C buses is a natural fit for the PIC24HJ64GP510T-I/PF. Its 16-bit data path handles protocol framing and CRC faster than 8-bit alternatives, while 100 pins of I/O expose enough UART/SPI/I2C instances for sensor-fanout. The 64 KB Flash accommodates structured protocol stacks (Modbus RTU, CANopen, or proprietary), and the 8 KB RAM buffers data before forwarding to a host. Industrial temperature grade and 3.3 V operation match industrial PLC and IIoT gateway backplanes, making this part a versatile data aggregator.
Recomendado
Solar Inverter Power Stage Controller
The PIC24HJ64GP510T-I/PF drives solar micro-inverter and string-inverter power stages with its 40 MIPs core. MPPT algorithms run in real time using the 10-bit ADC to sample PV voltage and current, while PWM outputs switch the boost or full-bridge stage at up to 100 kHz. The 64 KB Flash holds MPPT state machines, anti-islanding checks, and grid-synchronization routines, while the 8 KB RAM buffers ADC samples. Industrial temperature range and 3.3 V tolerance suit outdoor inverter enclosures with thermal stress.
Recomendado
Digital Power Conversion Control
For digital control of switch-mode power supplies (SMPS) and DC-DC converters, the PIC24HJ64GP510T-I/PF offers the right combination of deterministic interrupt latency, ADC sampling, and PWM resolution. Its DSP-capable core implements digital compensator loops (Type-II, Type-III) at switching frequencies up to 500 kHz, while the ADC samples output voltage and current with PWM-synchronized triggers. The 64 KB Flash holds multiple configuration profiles, and the industrial temperature grade supports telecom and industrial power modules.
Recomendado
Industrial Robotics Subsystem Controller
The PIC24HJ64GP510T-I/PF serves as a joint or axis controller in industrial robotics, where 100 pins of I/O handle multiple encoder inputs, limit switches, and peripheral sensors. Its 40 MIPs core runs PID and trajectory-planning loops with deterministic timing, and its motor-control PWM drives BLDC servo motors directly. The 8 KB RAM holds axis state and error log buffers, while the 64 KB Flash stores calibration constants and motion profiles. The industrial -40 C to +85 C temperature grade supports factory floor deployments with vibration and thermal cycling.
Recomendado
Uninterruptible Power Supply (UPS) Controller
The PIC24HJ64GP510T-I/PF orchestrates UPS line-interactive and online topologies, monitoring mains voltage, battery state-of-charge, and inverter output. Its 10-bit ADC samples battery voltage and current at high rate, while PWM outputs drive the inverter stage. The 64 KB Flash holds battery-charging profiles (sealed lead-acid, Li-ion) and the 8 KB RAM buffers telemetry for UART/CAN reporting. Industrial temperature grade and reliable Flash retention make it suitable for rack-mounted UPS modules where power-quality telemetry is critical.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC24HJ64GP510T-I/PF — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC24HJ64GP510-I/PF | PIC24HJ64GP510AT-I/PF | PIC24HJ128GP510AT-I/PF | PIC24HJ256GP610AT-I/PF | PIC24HJ64GP210A-I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (14x14 mm) | 100-TQFP (14x14 mm) - same | 100-TQFP (14x14 mm) - same | 100-TQFP (14x14 mm) - same | 100-TQFP (14x14 mm) - same | 100-TQFP (14x14 mm) - same |
| Flash Memory | 64 KB | 64 KB | 64 KB | 128 KB | 256 KB | 64 KB |
| RAM | 8 KB | 8 KB | 8 KB | 16 KB | 32 KB | 8 KB |
| CPU Speed | 40 MIPs | 40 MIPs | 40 MIPs | 40 MIPs | 40 MIPs | 40 MIPs |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Temperature Range | -40 C to +85 C (Industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Pin Count | 100 | 100 | 100 | 100 | 100 | 100 |
| Packaging Format | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tape & Reel | Tray |
Diferenciadores clave
- Tape-and-reel packaging optimized for high-volume SMT assembly (frente a PIC24HJ64GP510-I/PF)
- Silicon revision A errata corrections without redesign (frente a PIC24HJ64GP510AT-I/PF)
- Easy migration path to higher Flash with same package (frente a PIC24HJ128GP510AT-I/PF)
- 64KB Flash with smaller pin-count pin-compatible alternative (frente a PIC24HJ64GP210A-I/PF)
Notas de diseño
The 100-TQFP (14x14 mm) package has 0.5 mm pin pitch and is challenging to hand-solder. Use a reflow profile with peak temperature no greater than 250 C for 20 seconds maximum. Place 0.1 uF ceramic decoupling capacitors within 2 mm of each VDD/VSS pair and a 10 uF bulk capacitor near the package. The exposed thermal pad (if applicable to PF package variant) should be soldered to a 1 square inch copper pour to dissipate up to 1 W at full CPU load.
Route the PGECx/PGEDx pair with matched trace lengths (within 2 mm) and keep them away from switching signals such as PWM or high-current power traces. Place a small ferrite bead or 100 ohm resistor near the ICSP connector for ESD protection. The analog AVdd/AVss supply pair should be isolated from digital VDD/VSS with a ferrite and bulk capacitor to minimize ADC noise. The high-speed oscillator (OSC1/OSC2) traces should be short and surrounded by a ground guard ring.
Do not operate below 3.0 V on VDD or above 3.6 V - this can cause Flash programming failures or permanent damage. Always use 1% precision resistors in the MCLR pull-up and ensure the MCLR pulse width is at least 2 ms during reset. When migrating firmware from PIC24HJ64GP510 to PIC24HJ64GP510A, review the errata sheet for any peripheral behavior changes. Configure unused I/O pins as outputs driven low to minimize power consumption and avoid floating inputs.
Estimated: At 40 MHz CPU speed and full peripheral activity, the PIC24HJ64GP510T-I/PF can dissipate up to 0.5 W. The 100-TQFP package has theta_JA around 50 C/W, yielding a 25 C junction temperature rise above ambient at 0.5 W. For industrial -40 C to +85 C operation, ensure the ambient temperature plus self-heating stays below 125 C junction rating. A solid copper ground plane beneath the package is essential for thermal relief.
Información de cumplimiento
RoHS and REACH compliant per Microchip product family datasheet. Not AEC-Q100 qualified - PIC24H family targets industrial/consumer, not automotive. Lead-free reflow compatible per JEDEC J-STD-020 MSL3 at 250 C peak. Conflict minerals compliance per Microchip corporate policy.
