PIC32CM2532LS60100T-I/PF - 32-bit Cortex-M23 MCU, 256KB Flash | Microchip
N.º de pieza: PIC32CM2532LS60100T-I/PF ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $6.42 | $6,42 |
| 10 | $5.78 | $57,80 |
| 100 | $5.2 | $520,00 |
| 500 | $4.65 | $2.325,00 |
| 1.000 | $4.12 | $4.120,00 |
PIC32CM2532LS60100T-I/PF Descripción general
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of peripherals such as ADCs, timers, communication interfaces, and GPIOs. MCUs sit at the heart of nearly every embedded product - from simple sensor nodes to industrial motor controllers - and form the lowest layer of the embedded computing hierarchy: MCU -> SoC -> embedded system -> IoT endpoint. The Cortex-M23 is Arm's smallest, most energy-efficient TrustZone-capable core, designed for deterministic control with low active and sleep current.
Key features of the PIC32CM2532LS60100T-I/PF include 256 KB Flash, 32 KB SRAM, a 12-bit 1 Msps ADC, multiple SERCOM modules configurable as UART/SPI/I2C, a 16-bit timer/counter array, and an on-chip debug interface (SWD). The wide 1.62V to 3.63V operating voltage (LS60 variant) supports direct Li-Ion battery coupling, eliminating external LDO stages in power-constrained designs. TrustZone for Armv8-M enables hardware-isolated secure firmware execution.
Architecturally, the device uses a single-cycle hardware multiplier and hardware divider for fast DSP-style math, a Nested Vector Interrupt Controller (NVIC) for deterministic interrupt latency, and a Memory Protection Unit (MPU) for task isolation. The combination of Cortex-M23 efficiency with PIC legacy peripheral IP gives designers a familiar migration path from 8-bit PIC while gaining 32-bit performance and the broader Arm ecosystem (CMSIS, Keil/IAR/GCC toolchains, Harmony 3 framework).
Typical applications include industrial sensor hubs, low-power IoT end nodes, BLE/LoRa companion MCUs, motor control BLDC drivers, building automation, and consumer human-machine interfaces. The PIC32CM2532LS60100T-I/PF is well suited for any design needing deterministic Cortex-M23 control with strong connectivity and TrustZone security.
When designing with this device, plan the SWD debug access early - the SWD pins must remain accessible or be reassigned carefully, since they are shared with GPIO. Also reserve the NRST and verify VDD/VSS decoupling follows the 100-pin TQFP power pin map shown in the family datasheet. Use the MPLAB Harmony Configurator (MCC) for clock tree and peripheral setup to avoid manual register errors during bring-up.
This page synthesizes distributor stock, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.
Alternativas directas para PIC32CM2532LS60100T-I/PF — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC32CM2532LS60100T-I/PF (mismo factor de forma y huella) — difiere en Package, Core, MSL Level, Operating Temperature, ADC.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC32CM2532LS60100-I/PF
✅ Sustitución directa✓ En stock
$2.95 / unidad
Ver hoja de datos →PIC32CM2532LE00100-I/PF
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC32CM1216MC00048T-I/Y8X
✅ Sustitución directa✓ En stock
$2.6 / unidad
Ver hoja de datos →PIC32CM1216MC00032T-E/RTB
✅ Sustitución directa✓ En stock
$1.62 / unidad
Ver hoja de datos →PIC32CM2532LS60100T-I/PF Valores máximos y características eléctricas
| Core | Arm Cortex-M23 |
| Frecuencia de reloj máxima | 48 MHz |
| CoreMark/MHz | 2.64 |
| DMIPS/MHz | 1.03 |
| Program Memory (Flash) | 256 KB |
| Data Memory (SRAM) | 32 KB |
| Operating Voltage (LS60) | 2.0 V to 3.63 V |
| Operating Voltage (LE00/LS00) | 1.62 V to 3.63 V |
| Temperatura de funcionamiento | -40C to +85C |
| ADC | 12-bit, 1 Msps |
| Communication Interfaces | SERCOM (UART/SPI/I2C configurable) |
| Hardware Multiplier | Single-cycle |
| Hardware Divider | Yes |
| TrustZone | Armv8-M TrustZone |
| Encapsulado | 100-pin TQFP |
| Tipo de montaje | Surface Mount |
| Nivel MSL | MSL3 (per JEDEC J-STD-020, typical for TQFP) |
Guía de configuración de pines de PIC32CM2532LS60100T-I/PF 100-pin tqfp
Configuración de pines para PIC32CM2532LS60100T-I/PF (encapsulado 100-pin tqfp). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para PIC32CM2532LS60100T-I/PF.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PIC32CM2532LS60100T-I/PF es adecuado para 7 aplicacións: Industrial Sensor Hub with BLE, Low-Power IoT End Node, BLDC Motor Control (FOC Companion MCU), Building Automation Controller, Consumer HMI Touch Panel, Medical Patient Monitoring Sensor, Smart Energy Meter Edge Node.
Industrial Sensor Hub with BLE
The PIC32CM2532LS60100T-I/PF fits industrial sensor hubs by combining a 48 MHz Cortex-M23 core with 256 KB Flash, which is enough to run a BLE stack plus application firmware. Its 12-bit ADC at 1 Msps samples multi-channel sensor arrays with deterministic timing. The 2.0V minimum allows direct Li-Ion cell coupling, simplifying battery-powered remote monitoring nodes that need TrustZone security for authenticated field telemetry.
Recomendado
Low-Power IoT End Node
The PIC32CM2532LS60100T-I/PF is well suited to IoT end nodes because the Cortex-M23 core balances performance with sleep-mode efficiency. With 32 KB SRAM and 256 KB Flash, designers can run LoRaWAN or Matter stacks alongside application logic. The SERCOM peripherals map to UART/SPI/I2C without pin remapping headaches, and TrustZone isolates the secure bootloader from the application for safer OTA updates in the field.
Recomendado
BLDC Motor Control (FOC Companion MCU)
The PIC32CM2532LS60100T-I/PF serves as a companion MCU in BLDC motor drives, where the 32-bit Cortex-M23 handles user-interface, telemetry, and safety logic while a dedicated motor-control IC drives the power stage. Its 12-bit ADC samples back-EMF and current-sense signals for closed-loop monitoring, and the 48 MHz core computes RPM/Torque in real time. The TQFP-100 package gives enough GPIO for HMI buttons and status LEDs.
Recomendado
Building Automation Controller
For HVAC, lighting, and access-control panels, the PIC32CM2532LS60100T-I/PF provides deterministic Cortex-M23 control with plenty of Flash for protocol stacks (BACnet, Modbus, KNX bridges). The wide operating voltage window supports 24V industrial rails with simple LDO regulation. TrustZone isolates secure credential handling from the application firmware, a key requirement for modern access-control systems that must resist credential extraction.
Recomendado
Consumer HMI Touch Panel
The PIC32CM2532LS60100T-I/PF powers consumer HMI panels with capacitive touch and TFT displays, leveraging its ADC for touch sensing and SERCOM for SPI-driven LCDs. The 48 MHz core renders basic GUIs smoothly, while the 256 KB Flash holds graphics assets and localization tables. TrustZone secures factory calibration and boot validation, protecting against reflash-attachment firmware tampering in connected appliances.
Recomendado
Medical Patient Monitoring Sensor
The PIC32CM2532LS60100T-I/PF fits wearable patient-monitoring sensors where deterministic Cortex-M23 performance and TrustZone isolation are essential for FDA-class data integrity. Its 12-bit ADC captures ECG/PPG signals at clinical sampling rates, and the 2.0V minimum supports direct Li-Ion battery coupling without extra regulation. The -40C to +85C industrial operating range covers body-temperature wearables and bedside monitors.
Recomendado
Smart Energy Meter Edge Node
The PIC32CM2532LS60100T-I/PF serves smart-meter edge nodes that compute power quality metrics and forward telemetry over PLC or RF. The 48 MHz Cortex-M23 plus 12-bit ADC handles real-time energy calculations, and the wide 2.0V-3.63V supply supports direct rectifier-rail operation. TrustZone protects metering-calibration data from tampering - a regulatory requirement in many jurisdictions for utility-grade meters.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC32CM2532LS60100T-I/PF — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC32CM2532LS60100-I/PF | PIC32CM2532LE00100-I/PF | PIC32CM1216MC00048T-I/Y8X | PIC32CM1216MC00032T-E/RTB |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | QFN-48 - smaller | QFN-32 - smaller |
| Core | Cortex-M23 | Cortex-M23 | Cortex-M23 | Cortex-M0+ | Cortex-M0+ |
| Max Clock | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash | 256 KB | 256 KB | 128 KB | 128 KB | 32 KB |
| SRAM | 32 KB | 32 KB | 16 KB | 16 KB | 8 KB |
| Operating Voltage | 2.0 V to 3.63 V | 2.0 V to 3.63 V | 1.62 V to 3.63 V | 1.62 V to 3.63 V | 1.62 V to 3.63 V |
| TrustZone | Yes | Yes | Yes | No (Cortex-M0+) | No (Cortex-M0+) |
Diferenciadores clave
- TrustZone-capable Cortex-M23 with same 48 MHz headroom as M0+ siblings (frente a PIC32CM1216MC00048T-I/Y8X (Cortex-M0+))
- 256 KB Flash - 2x of LE00100 sibling in same TQFP-100 footprint (frente a PIC32CM2532LE00100-I/PF)
- TQFP-100 with 80+ GPIO for HMI and industrial fan-out (frente a PIC32CM1216MC00032T-E/RTB (QFN-32))
Notas de diseño
Place the 100-pin TQFP decoupling network with a 100 nF X7R on every VDD/VSS pair, plus a single 4.7 uF bulk capacitor near the MCU. Keep the SWD pins (SWDIO, SWCLK) routed short and accessible for debug headers, and never share them with high-current outputs without a series resistor for in-circuit programming.
Estimated: at full 48 MHz with all peripherals active, core current is typically under 10 mA from 3.3V, so dissipation is roughly 33 mW - well within TQFP-100 thermal limits with normal 4-layer PCB copper. If sleep current matters, use the PIC32CM LS60 deep-sleep modes (sub-uA) and verify wake-up sources with the data sheet's power-saving example.
Do not assume the LS60 and LE00 PIC32CM silicon are interchangeable without checking the VDD minimum - the LS60 requires 2.0V while LE00 supports 1.62V. Brown-out detection thresholds differ; configure BOR appropriately in your project startup code and verify with MPLAB X before firmware lock.
Información de cumplimiento
RoHS and REACH compliance inferred from Microchip public product page; AEC-Q100 not applicable - this is a -40C to +85C industrial-grade part, not automotive.
