PIC32MX320F064HT-80I/PT - 80MHz 32-bit MCU 64KB Flash | Microchip
N.º de pieza: PIC32MX320F064HT-80I/PT ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $6.72 | $6,72 |
| 10 | $6.05 | $60,50 |
| 100 | $5.38 | $538,00 |
| 500 | $4.71 | $2.355,00 |
| 1.000 | $4.05 | $4.050,00 |
PIC32MX320F064HT-80I/PT Descripción general
A 32-bit microcontroller (MCU) is a programmable processor that integrates CPU core, Flash program memory, SRAM, and peripherals on one silicon die; PIC32MX MCUs add 32-bit MIPS M4K RISC performance to Microchip's PIC architecture, sitting between 8-bit PIC16/PIC18 and the higher-end PIC32MZ families in the microcontroller hierarchy: 32-bit MCU -> embedded processor -> microcontroller -> semiconductor. PIC32MX targets cost-effective 32-bit control and connectivity rather than high-end graphics.
Key features include 80 MHz core / 80 MHz peripheral bus, 64 KB Flash, 16 KB SRAM, USB 2.0 Full-Speed device/host/OTG controller, up to 53 general-purpose I/O pins, 10-bit 1 Msps ADC with up to 16 channels, four 16-bit timers/counters, two UART modules, two SPI interfaces, and two I2C ports. Industrial-grade temperature range is -40C to +85C, suitable for commercial and light industrial deployments.
Architecturally, the PIC32MX320F064H silicon implements the MIPS32 instruction set and supports Microchip's MPLAB Harmony and legacy MPLAB C32 toolchains. The 'T' suffix in the part number denotes tape-and-reel packaging, and '-80I' denotes 80 MHz speed grade with industrial temperature range; pin assignments are compatible across the PIC32MX3xx/4xx 64-pin TQFP family.
Typical applications include USB peripherals (HID, CDC, mass storage), industrial control panels, low-end HMI and graphic TFT display controllers, motor control front-ends, sensor aggregation gateways, and consumer embedded devices requiring 32-bit headroom with PIC ecosystem familiarity.
When developing with the PIC32MX320F064HT-80I/PT, observe the 2.3 V to 3.6 V supply range and provide adequate decoupling near each VDD/VBAT pin. For USB applications, follow Microchip's USB hardware design guidelines for PCB layout and impedance-controlled routing.
This page synthesizes distributor pricing, pin-compatible drop-in alternatives across the PIC32MX family, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a one-stop decision reference.
Alternativas directas para PIC32MX320F064HT-80I/PT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC32MX320F064HT-80I/PT (mismo factor de forma y huella) — difiere en Package, ADC, Operating Temperature, I/O Pins, Timers.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC32MX320F064H-80I/PT
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC32MX320F032H-40I/PT
✅ Sustitución directa✓ En stock
$3.32 / unidad
Ver hoja de datos →PIC32MX340F128H-80I/PT
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$4.61 / unidad
Ver hoja de datos →PIC32MX320F064HT-40I/PT
✅ Sustitución directa✓ En stock
$4.16 / unidad
Ver hoja de datos →PIC32MX320F064HT-40V/PT
✅ Sustitución directa✓ En stock
$2.85 / unidad
Ver hoja de datos →PIC32MX320F064HT-40I/MR
✅ Sustitución directa✓ En stock
$3.79 / unidad
Ver hoja de datos →PIC32MX320F064HT-80I/PT Valores máximos y características eléctricas
| Core Architecture | MIPS32 M4K |
| Core Bit Width | 32-bit |
| Maximum CPU Speed | 80 MHz |
| Peripheral Bus Clock | 80 MHz |
| Program Memory Size | 64 KB (64K x 8) Flash |
| Data Memory (SRAM) | 16 KB |
| Encapsulado | 64-pin TQFP (PT) 10x10 mm |
| Tipo de montaje | Surface Mount |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Rango de temperatura de funcionamiento | -40C to +85C (I grade) |
| ADC | 10-bit, up to 16 channels |
| I/O Pins | Up to 53 |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| Communication Interfaces | 2x UART, 2x SPI, 2x I2C |
| Timers | 5x 16-bit Timer/Counter |
| Estado RoHS | Compliant |
| Lead-Free | Yes |
Configuración de pines de PIC32MX320F064HT-80I/PT
| Pin 1 | RG15 — General-purpose IO / peripheral pin |
| Pin 2 | VDD — Positive supply voltage (2.3-3.6 V) |
| Pin 3 | RF9 — General-purpose IO / peripheral pin |
| Pin 4 | RF8 — General-purpose IO / peripheral pin |
| Pin 5 | RF7 — General-purpose IO / peripheral pin |
| Pin 6 | RF6 — General-purpose IO / peripheral pin |
| Pin 7 | RF4 — General-purpose IO / peripheral pin |
| Pin 8 | RF5 — General-purpose IO / peripheral pin |
| Pin 9 | RF3 — General-purpose IO / peripheral pin |
| Pin 10 | RF2 — General-purpose IO / peripheral pin |
| Pin 11 | RF1 — General-purpose IO / peripheral pin |
| Pin 12 | RF0 — General-purpose IO / peripheral pin |
| Pin 13 | VDD — Positive supply voltage (2.3-3.6 V) |
| Pin 14 | RB15 — General-purpose IO / peripheral pin |
| Pin 15 | RB14 — General-purpose IO / peripheral pin |
| Pin 16 | RB13 — General-purpose IO / peripheral pin |
| Pin 17 | RB12 — General-purpose IO / peripheral pin |
| Pin 18 | RB11 — General-purpose IO / peripheral pin |
| Pin 19 | RB10 — General-purpose IO / peripheral pin |
| Pin 20 | RB9 — General-purpose IO / peripheral pin |
| Pin 21 | RB8 — General-purpose IO / peripheral pin |
| Pin 22 | VSS — Ground reference |
| Pin 23 | RA15 — General-purpose IO / peripheral pin |
| Pin 24 | RA14 — General-purpose IO / peripheral pin |
| Pin 25 | RA9 — General-purpose IO / peripheral pin |
| Pin 26 | RA10 — General-purpose IO / peripheral pin |
| Pin 27 | RA0 — General-purpose IO / peripheral pin |
| Pin 28 | RA1 — General-purpose IO / peripheral pin |
| Pin 29 | RA2 — General-purpose IO / peripheral pin |
| Pin 30 | RA3 — General-purpose IO / peripheral pin |
| Pin 31 | RA4 — General-purpose IO / peripheral pin |
| Pin 32 | RA5 — General-purpose IO / peripheral pin |
| Pin 33 | VDD — Positive supply voltage (2.3-3.6 V) |
| Pin 34 | RC15 — General-purpose IO / peripheral pin |
| Pin 35 | RC13 — General-purpose IO / peripheral pin |
| Pin 36 | RC14 — General-purpose IO / peripheral pin |
| Pin 37 | RD0 — General-purpose IO / peripheral pin |
| Pin 38 | RD1 — General-purpose IO / peripheral pin |
| Pin 39 | RD2 — General-purpose IO / peripheral pin |
| Pin 40 | RD3 — General-purpose IO / peripheral pin |
| Pin 41 | RD4 — General-purpose IO / peripheral pin |
| Pin 42 | RD5 — General-purpose IO / peripheral pin |
| Pin 43 | RD6 — General-purpose IO / peripheral pin |
| Pin 44 | RD7 — General-purpose IO / peripheral pin |
| Pin 45 | VSS — Ground reference |
| Pin 46 | RC1 — General-purpose IO / peripheral pin |
| Pin 47 | RC2 — General-purpose IO / peripheral pin |
| Pin 48 | RC3 — General-purpose IO / peripheral pin |
| Pin 49 | RC4 — General-purpose IO / peripheral pin |
| Pin 50 | VDD — Positive supply voltage (2.3-3.6 V) |
| Pin 51 | OSC1 — Primary oscillator / clock input |
| Pin 52 | OSC2 — Primary oscillator / clock output |
| Pin 53 | VSS — Ground reference |
| Pin 54 | RG9 — General-purpose IO / peripheral pin |
| Pin 55 | RG8 — General-purpose IO / peripheral pin |
| Pin 56 | RG7 — General-purpose IO / peripheral pin |
| Pin 57 | RG6 — General-purpose IO / peripheral pin |
| Pin 58 | RB5 |
| Pin 59 | RB4 — General-purpose IO / peripheral pin |
| Pin 60 | RB3 — General-purpose IO / peripheral pin |
| Pin 61 | RB2 — General-purpose IO / peripheral pin |
| Pin 62 | RB1 — General-purpose IO / peripheral pin |
| Pin 63 | RB0 — General-purpose IO / peripheral pin |
| Pin 64 | RG14 — General-purpose IO / peripheral pin |
Aplicaciones típicas
PIC32MX320F064HT-80I/PT es adecuado para 6 aplicacións: USB Human Interface Device (HID) Peripherals, Industrial Control Panels, Low-End HMI with Graphic TFT Display, Sensor Aggregation Gateway, Consumer Embedded Products with PIC Ecosystem, Motor Control Front-End.
USB Human Interface Device (HID) Peripherals
The PIC32MX320F064HT-80I/PT is well suited to USB HID peripherals such as keyboards, mice, custom input devices, and HID-class game controllers. The integrated USB 2.0 Full-Speed Device/Host/OTG controller eliminates external PHY cost, and 80 MHz MIPS M4K performance delivers sufficient headroom for HID report parsing and debounce logic. The 64 KB Flash fits Microchip's USB stack, and 16 KB SRAM handles HID report buffers plus descriptor storage. Place the part in a 64-pin TQFP with proper VBUS sensing on a dedicated pin, route USB D+/D- as a 90 ohm differential pair on the PCB, and follow Microchip's USB hardware design guidelines. The 53 GPIO pins comfortably handle matrix-scanned keyboards or multi-axis input devices alongside the USB interface.
Recomendado
Industrial Control Panels
The PIC32MX320F064HT-80I/PT fits 32-bit industrial control panels driving relays, sensors, displays, and serial fieldbus. The 80 MHz MIPS M4K core executes control loops and HMI logic with ample margin, the 10-bit ADC with up to 16 channels handles multiple transducer inputs, and the -40C to +85C industrial temperature range tolerates factory-floor environments. With 53 GPIO, two UART, two SPI, and two I2C interfaces, the part simultaneously drives Modbus RTU links, local keypads, character or segment LCDs. The 64 KB program memory fits typical ladder-logic translation and PID control firmware. Place the MCU near field terminals with proper isolation, add TVS protection on external I/O, and follow IPC-2221 PCB design rules for industrial creepage and clearance.
Recomendado
Low-End HMI with Graphic TFT Display
The PIC32MX320F064HT-80I/PT drives low-end graphic TFT displays for HVAC, appliance, and small-machine HMIs. The 80 MHz core handles basic GUI rendering for screens up to 320x240 QVGA, and the parallel PMP interface in the 64-pin TQFP can drive common TFT controllers like ILI9341 over the on-chip SPI bus. With 64 KB Flash storing bitmaps and 16 KB SRAM double-buffering the GUI, the part replaces costlier 32-bit ARM alternatives for non-realtime HMI layers. For touchscreen overlays, use the 10-bit ADC to read a 4-wire resistive touch panel. Choose this part when you need 32-bit performance with PIC ecosystem familiarity and a 64-pin TQFP footprint that supports 53 GPIO for keypad, LED, and backlight control.
Recomendado
Sensor Aggregation Gateway
The PIC32MX320F064HT-80I/PT acts as a sensor aggregation gateway consolidating UART-based sensors, I2C peripherals, and SPI devices onto a single MCU with USB or serial uplink. The 80 MHz core, two UART, two SPI, two I2C, and 53 GPIO handle multi-sensor fan-in, and the 64 KB Flash stores protocol translation logic for common sensor stacks. The 16 KB SRAM buffers bursts of sensor data before forwarding to the host. This topology is common in industrial IoT edge nodes, lab instrumentation multiplexers, and smart-building sensor hubs. Place the part in the 64-pin TQFP for compact layouts, add a 32.768 kHz crystal for RTCC timing, and follow Microchip's low-power design guidelines for sleep-mode battery operation if needed.
Recomendado
Consumer Embedded Products with PIC Ecosystem
The PIC32MX320F064HT-80I/PT targets cost-effective consumer devices benefiting from Microchip's PIC toolchain familiarity. The 80 MHz MIPS M4K core handles consumer UI logic, audio playback, motor control, and connectivity protocols within the 64 KB Flash and 16 KB SRAM envelope. With up to 53 GPIO, two UART, two SPI, and two I2C, plus USB 2.0 Full-Speed OTG, the part supports remote controls, audio docks, smart appliances, and educational kits. The -40C to +85C industrial temperature range tolerates typical indoor thermal stress. Choose this part when you want 32-bit performance with Microchip's MPLAB X IDE and Harmony framework, and a 64-pin TQFP footprint enabling compact consumer PCB designs.
Recomendado
Motor Control Front-End
The PIC32MX320F064HT-80I/PT functions as a motor-control front-end for small BLDC, stepper, and brushed DC motors in appliances, fans, and small industrial pumps. The 80 MHz MIPS M4K core executes field-oriented control (FOC) and trapezoidal commutation algorithms, and the 10-bit ADC with 1 Msps sampling captures back-EMF and current-sense signals. The 5 16-bit timers produce PWM outputs for 3-phase motor bridges, and the 53 GPIO handles Hall sensors, fault inputs, and gate-driver controls. The 64 KB Flash fits standard FOC libraries, and 16 KB SRAM buffers state variables. Place the part away from switching power sections with proper isolation, and follow Microchip's motor-control PCB guidelines for analog/digital ground separation.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC32MX320F064HT-80I/PT — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC32MX320F064H-80I/PT | PIC32MX320F032H-40I/PT | PIC32MX340F128H-80I/PT | PIC32MX320F064HT-40I/PT | PIC32MX320F064HT-40V/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP (PT) 10x10 mm | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same | 64-pin TQFP (PT) 10x10 mm - same |
| Core | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit |
| Maximum CPU Speed | 80 MHz | 80 MHz | 40 MHz (-50%) | 80 MHz | 40 MHz (-50%) | 40 MHz (-50%) |
| Flash Memory | 64 KB | 64 KB | 32 KB (-50%) | 128 KB (+100%) | 64 KB | 64 KB |
| Operating Temperature | -40C to +85C (I grade) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +105C (V) |
| Packaging Format | Tape & Reel (T) | Tray (no T suffix) | Tray (no T suffix) | Tray (no T suffix) | Tape & Reel (T) | Tape & Reel (T) |
| USB | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG |
Diferenciadores clave
- 80 MHz maximum CPU speed with 64 KB Flash (frente a PIC32MX320F032H-40I/PT)
- Pin-compatible 128 KB Flash upgrade path (frente a PIC32MX340F128H-80I/PT)
- Integrated USB 2.0 Full-Speed OTG (frente a Generic 32-bit MCU without USB)
- Tape-and-reel packaging for high-volume assembly (frente a PIC32MX320F064H-80I/PT (tray))
Notas de diseño
Estimated: The PIC32MX320F064HT-80I/PT operates from 2.3 V to 3.6 V with multiple VDD/VSS pins (pins 2, 13, 33, 45, 50, 53). Place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pin. Add a bulk 10 uF tantalum or ceramic capacitor near the package to handle transient load steps during USB enumeration and peripheral switching. Tie unused VDD pins to the supply and unused VSS pins to ground. Avoid long PCB traces between VDD pins and capacitors to minimize parasitic inductance.
For USB 2.0 Full-Speed signalling, route USB D+ and D- as a 90 ohm differential pair on the top or bottom layer over a continuous ground plane. Keep the pair as short as practical (typically under 50 mm). Place the 15 kohm pull-down on D- and the 1.5 kohm pull-up on D+ (or controlled by software on the D+ pull-up enable pin). Provide proper VBUS sensing through a dedicated pin with voltage divider or dedicated USB VBUS sense pin. Follow Microchip's USB hardware design guidelines for full compliance.
Do not exceed 3.6 V on any VDD pin; the MCU is not 5V tolerant on digital I/O unless explicitly stated. Ensure the supply rise time meets Microchip's power-on reset (POR) specification. The 'H' suffix on the part number indicates the 64-pin TQFP package with USB; do not select the 64-pin QFN variant (different footprint). When migrating firmware between -40 and -80 speed grades, verify timing loops because peripheral and CPU clocks differ by 2x.
The 64-pin TQFP package has 0.4 mm lead pitch and 0.6 mm lead width - use 0.2 mm PCB trace width with 0.15 mm spacing for fanout. Place the IC on the top side with all peripheral connectors on the same edge for assembly-test access. Use 4-layer PCB stackup (signal-GND-power-signal) for best EMI/EMC performance in motor control or USB applications. Follow IPC-2221 design rules and Microchip's recommended PCB footprint in the package documentation.
Información de cumplimiento
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - this is a commercial/industrial MCU. Lead-free and Pb-free packaging per Microchip's Microchip RoHS/REACH declarations. Halogen-free status not stated in provided data.
