SI2161-D-GM - DVB-T Video Demodulator | Silicon Laboratories
N.º de pieza: SI2161-D-GM ✓ ActivoSI2161-D-GM Descripción general
A video demodulator is an interface-processing semiconductor that recovers digital transport-stream information from a modulated RF signal. In the broader device hierarchy, the SI2161-D-GM belongs to the video IC and demodulator category within interface ICs and, more broadly, integrated circuits. Its role is to accept the output of a tuner or analog front end, perform the required DVB-T demodulation, and expose status or configuration information through a host-controlled interface.
The principal package and feature parameters are a 36-VFQFN exposed-pad configuration, a nominal 5 mm by 6 mm body, a surface-mount mounting method, DVB-T demodulation, and GPIO plus I2C host connectivity. The exposed pad supports heat transfer from the IC to the PCB, which is important in compact tuner and television designs. The part is also identified as lead-free and RoHS compliant. Its operating temperature range, supply-voltage limits, clock requirements, sensitivity, and maximum input frequency require confirmation from the manufacturer datasheet before a production design is released.
The SI2161-D-GM is a demodulator rather than a complete tuner. Its analog front end is intended to work with compatible tuner silicon, including the Si2170, Si2171, and Si2172 family identified in the product documentation. This division of responsibility allows the demodulator to be selected independently from the RF tuner while preserving a known system architecture. Integration with the selected front end, crystal or clock source, supplies, reset circuitry, and I2C host driver determines the final reception performance.
Typical installations include DVB-T television sets, set-top boxes, PC-connected tuner sticks, portable television products, and integrated tuner modules. In each case, the SI2161-D-GM handles DVB-T signal recovery while an upstream RF section performs tuning and analog signal conditioning. The I2C interface allows a system processor to configure registers and monitor demodulator status, while GPIO provides hardware signaling for functions such as reset, lock indication, or interrupt handling where supported by the application configuration.
PCB implementation should follow the manufacturer land pattern and exposed-pad layout exactly. Place the decoupling network and clock components close to their associated pins, provide an uninterrupted ground reference beneath the exposed pad, and route high-speed or sensitive signals away from switching-supply and digital-return paths. Confirm thermal performance at the maximum ambient temperature and account for heat flow through the exposed pad, copper planes, vias, and enclosure rather than relying on the package rating alone.
This page organizes the SI2161-D-GM package information, interface details, application guidance, design notes, and verified drop-in alternatives for engineers evaluating the device for a DVB-T receiver. It also identifies the electrical and lifecycle information that must be confirmed against the manufacturer datasheet before schematic release, PCB construction, or production qualification.
Alternativas directas para SI2161-D-GM — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasSI2161-D-GM Especificaciones
| Product Type | DVB-T video demodulator IC |
| Signal Standard | DVB-T |
| Functional Application | Tuner and digital television reception |
| Encapsulado | 36-VFQFN with exposed pad |
| Package Dimensions | 5 mm x 6 mm |
| Package Height | 0.75 mm |
| Recuento de pines | 36 pins |
| Tipo de montaje | Surface mount |
| Control Interfaces | GPIO and I2C |
| Primary Device Category | Video processing IC |
| Analog Front End Compatibility | Si2170, Si2171, and Si2172 hybrid tuner family |
| Packaging | Tray |
| Lead-Free Status | Lead-free |
| Estado RoHS | RoHS compliant |
Guía de configuración de pines de SI2161-D-GM 0.75 mm
Configuración de pines para SI2161-D-GM (encapsulado 0.75 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para SI2161-D-GM.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SI2161-D-GM es adecuado para 6 aplicacións: Digital Television Set, Set-Top Box, USB TV Tuner Dongle, Portable Television Product, PC Television Receiver, Integrated DVB-T Tuner Module.
Digital Television Set
The SI2161-D-GM fits the demodulation stage of a DVB-T television receiver because it is specifically identified as a standalone DVB-T video demodulator. It sits downstream of the tuner and analog front end, which select the RF channel and condition the signal, while the SI2161-D-GM handles waveform recovery and communicates with the television main processor through GPIO and I2C. Its 36-VFQFN package measures 5 mm by 6 mm and includes an exposed pad, allowing a compact receiver implementation with effective PCB-based heat removal. The designer should use the manufacturer reference circuit and pin-definition tables to establish clocking, reset, supply sequencing, and front-end signal levels.
Recomendado
Set-Top Box
The SI2161-D-GM is suitable for a set-top box that receives DVB-T broadcasts and decodes the resulting transport stream in a host processor. Its GPIO and I2C interfaces provide a direct path for register configuration, lock-status monitoring, and system control. The device performs demodulation rather than channel tuning, so the implementation should pair it with the manufacturer-described Si2170, Si2171, or Si2172 front-end family. Its 36-VFQFN exposed-pad construction supports a compact board, but the thermal pad must connect to the PCB ground structure according to the land-pattern guidance. Firmware must also support the register map and status behavior required by the receiver platform.
Recomendado
USB TV Tuner Dongle
The SI2161-D-GM can form the DVB-T demodulation section of a USB-connected television tuner dongle. A host-side USB bridge controls the device through I2C, while the demodulator processes the output of a compatible tuner front end. The 5 mm by 6 mm, 36-pin VFQFN package is useful in dongles where board area is constrained, and the exposed pad requires a thermal-aware land pattern. A complete dongle also needs an RF input, matching network, filtering, clocking, stable power rails, USB-to-I2C control, and receiver firmware. The SI2161-D-GM should therefore be selected as part of a validated tuner reference design rather than evaluated independently of the RF chain.
Recomendado
Portable Television Product
The SI2161-D-GM is appropriate for portable television products requiring DVB-T reception in a compact assembly. Its GPIO interface can support direct hardware signaling, while I2C provides configuration and status access to the product controller. The small VFQFN footprint preserves board area for display, battery, and wireless subsystems, although thermal performance must be checked inside the enclosure. Because the SI2161-D-GM is a demodulator rather than an RF tuner, the design must include a compatible front end and verify signal levels, clock startup, reset timing, and supply sequencing. Firmware should also handle channel changes, signal-loss recovery, and the transition between acquisition and locked states.
Recomendado
PC Television Receiver
The SI2161-D-GM can serve as the DVB-T demodulator in a PCI-based, USB-based, or embedded PC television receiver. The system controller configures the demodulator over I2C and monitors acquisition through GPIO or status registers. This arrangement separates RF tuning and demodulation from host-side transport-stream processing, making the part suitable for multistandard products that pair DVB-T reception with other tuner technologies. The board design should follow the exposed-pad ground pattern, isolate sensitive RF and demodulator paths from noisy processors, and provide the clocking required by the manufacturer application circuit. Host software must implement the documented control sequence and recovery behavior.
Recomendado
Integrated DVB-T Tuner Module
The SI2161-D-GM is well suited to an integrated DVB-T tuner module because its documentation explicitly identifies compatibility with the Si2170, Si2171, and Si2172 hybrid tuner family. The tuner stage performs channel selection and analog conditioning, while the SI2161-D-GM carries out DVB-T demodulation and exposes control through GPIO and I2C. The 36-VFQFN exposed-pad package supports module miniaturization, but assembly constraints and exposed-pad flatness must be considered during manufacturing. Reference the manufacturer land pattern and application schematic for decoupling, clock components, signal routing, and thermal-via placement. Validate the complete RF-to-demodulator chain for gain, noise, filtering, and lock performance before production.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para SI2161-D-GM — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | Silicon Laboratories |
| Package | 36-VFQFN with exposed pad |
| Package Dimensions | 5 mm x 6 mm |
| Pin Count | 36 pins |
| Device Function | Standalone DVB-T video demodulator |
| Control Interfaces | GPIO and I2C |
| Mounting Type | Surface mount |
| Lead-Free Status | Lead-free |
| RoHS Status | RoHS compliant |
| Intended Front-End Family | Si2170, Si2171, and Si2172 hybrid tuner family |
Diferenciadores clave
- Dedicated DVB-T demodulation function (frente a SI2165-D-GM)
- Documented integration with the hybrid tuner family (frente a SI2161-D-GMR)
- Compact 36-pin surface-mount implementation (frente a Generic 36-QFN video IC)
Notas de diseño
Implement the exposed-pad land pattern exactly as shown in the manufacturer package drawing. The 36-VFQFN body measures 5 mm by 6 mm, and its exposed pad is important for both assembly and heat transfer. Provide a low-impedance ground connection through the pad and nearby thermal vias while maintaining the manufacturer-defined pad dimensions and solder-mask clearance. Confirm the design against the current land pattern and assembly process rather than relying only on a generic QFN footprint.
Keep the demodulator clock, reset, I2C, and GPIO routing short and away from RF and switching-node paths. Place the associated bypass capacitors at their intended power pins and connect them to a quiet ground reference. Since this IC follows the tuner and analog front end in the signal chain, route sensitive connections according to the manufacturer reference layout and maintain controlled impedance where applicable. Separate noisy processor, memory, and display signals from the demodulator region to reduce coupling into the recovery stage.
Evaluate the exposed pad as the primary vertical heat-flow path from the SI2161-D-GM into the PCB. The package dimensions alone do not determine junction temperature; ambient temperature, copper area, via count, board construction, enclosure airflow, and neighboring heat sources all affect the result. Confirm operating-temperature and power-consumption limits in the manufacturer documentation, then perform thermal analysis at the maximum expected ambient condition. Avoid adding thermal vias where the assembly process or exposed-pad soldering method does not support them.
Do not treat the SI2161-D-GM as a complete tuner or assume that a generic 36-QFN component can replace it. The device provides DVB-T demodulation and requires a suitable RF front end, clock source, supply network, reset arrangement, and host control sequence. Similar package dimensions do not establish pin compatibility, register compatibility, or signal-standard equivalence. Validate any proposed substitution against the official pin table, electrical characteristics, application schematic, and firmware-control requirements before changing a released design.
Información de cumplimiento
The product listing identifies the SI2161-D-GM as RoHS compliant and lead-free. REACH, halogen-free, and conflict-minerals status were not stated in the available product information.