Texas Instruments

SN74LS612N - 40-Pin Memory Mapper | Texas Instruments

N.º de pieza: SN74LS612N ✓ Activo
PDIP-40 Package 16 words by 12 bits Memory
MOQ: 1 |

SN74LS612N Descripción general

The Texas Instruments SN74LS612N is a 40-pin bipolar TTL memory-mapper integrated circuit containing a 4-line-to-16-line decoder, a 16-word by 12-bit random-access memory, and 16 channels of 2-line-to-1-line multiplexers. It is designed for address-decoding, channel-selection, and data-routing applications in legacy digital systems. The device is supplied in a 40-pin PDIP package.

A memory mapper is a specialized logic IC that converts a compact set of address or control signals into a larger collection of selectable outputs. Within the interface IC and logic IC hierarchy, it sits above basic TTL gates and combinational decoders while adding stored configuration data and multiplexed signal paths. This combination lets older microprocessor, minicomputer, and peripheral-control systems implement address expansion and I/O channel selection with fewer external components.

The SN74LS612N integrates three principal functional blocks. Its 4-to-16 decoder provides sixteen selection channels, while the 16-word by 12-bit memory can retain programmable control or routing information. Sixteen 2-to-1 multiplexers then select between paired signal lines. Integrating these functions reduces the component count and board area needed for systems that repeatedly route several addresses or data sources through a common destination.

The 40-pin PDIP package exposes the decoder, memory, multiplexer channels, control logic, and power connections through a conventional through-hole pin arrangement. Because this is a legacy bipolar TTL device, board-level decisions must account for supply-voltage limits, input levels, propagation delay, fan-out, and unused-input handling exactly as specified in the Texas Instruments datasheet. Designers should also confirm every signal connection against the pin-description table before laying out a replacement board.

Typical applications include microprocessor address decoding, memory-space expansion, peripheral port multiplexing, programmable channel selection, data-routing control, and restoration or maintenance of older computer and industrial-control equipment. The device is particularly useful when a system requires more independently selectable destinations than can be produced directly by its available address lines, or when stored configuration data must alter routing behavior without changing the external wiring.

A primary design consideration is that a memory mapper is not a general-purpose processor or electrically interchangeable with modern programmable logic. The system must preserve the original device's pin assignments, control timing, logic levels, and supported load characteristics. Prototype and repair designs should begin with the pin-description table and functional diagrams in the manufacturer datasheet rather than inferring connections from block diagrams alone.

This page consolidates the manufacturer-family architecture, package information, sourcing details, replacement constraints, and practical integration guidance for engineers evaluating SN74LS612N. It also distinguishes documented function from compatibility assumptions and identifies the checks required before using a substitute part on an existing 40-pin board.

Alternativas directas para SN74LS612N — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

SN74LS612N Valores máximos y características eléctricas

Product Type Memory mapper integrated circuit
Logic Family 74LS TTL logic
Decoder Configuration 4-line-to-16-line decoder
Memory Organization 16 words by 12 bits
Multiplexer Configuration 16 channels of 2-line-to-1-line multiplexers
Package Type PDIP-40
Recuento de pines 40 pins
Tipo de montaje Through-hole

Guía de configuración de pines de SN74LS612N pdip-40

Configuración de pines para SN74LS612N (encapsulado pdip-40). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado pdip-40 para SN74LS612N

No hay datos detallados de patillaje disponibles para SN74LS612N.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

SN74LS612N es adecuado para 6 aplicacións: Microprocessor Address Decoding, Memory-Space Expansion, Peripheral Port Multiplexing, Programmable Channel Selection, Data-Routing Control, Legacy Equipment Maintenance.

🔧

Microprocessor Address Decoding

The SN74LS612N is suitable for legacy microprocessor systems that require more decoded destinations than the processor address lines can select directly. Its 4-line-to-16-line decoder creates 16 selection outputs, while the internal 16-word by 12-bit memory can retain device-selection or routing information. Installed in a 40-pin PDIP circuit, it consolidates decoding and configuration functions into one package. Engineers should verify clock relationships and signal timing in the manufacturer datasheet, then confirm that all 40 PCB connections match the exact SN74LS612N pin description.

🖥️

Memory-Space Expansion

The SN74LS612N can help expand the apparent address space of an older bus-based controller by combining a 4-to-16 decoder with stored selection data. Its 16-word by 12-bit memory provides sixteen configurable words, allowing repeated control states to be represented within one logical device. This is useful in equipment designed around mature TTL logic rather than programmable processors. The design must honor the family's bipolar TTL timing and logic-level requirements, and PCB implementation should follow the datasheet's pin-description and functional diagrams without inferring connections.

🏭

Peripheral Port Multiplexing

The sixteen channels of 2-line-to-1-line multiplexers make the SN74LS612N useful for routing peripheral signals in older computer or industrial-control equipment. Each channel can select between two sources, while the decoder and 16-word by 12-bit memory coordinate the routing configuration. Integrating these functions reduces the number of separate logic packages required near constrained through-hole boards. Signal timing, enable sequencing, and source loading must be checked against the manufacturer documentation for the selected supply and operating conditions.

🎛️

Programmable Channel Selection

The SN74LS612N supports applications requiring a bank of selectable channels rather than a fixed one-of-N decoder. Its 4-line-to-16-line decoder establishes sixteen logical destinations, and the 16-word by 12-bit memory can hold selection states that influence the sixteen multiplexer channels. This combination is applicable to legacy test systems, interface controllers, and industrial instrumentation. For dependable operation, use the exact manufacturer pin table, preserve required reset and control sequencing, and validate timing at the system's slowest valid clock condition.

🌐

Data-Routing Control

The SN74LS612N can serve as a central routing controller when a legacy system must direct several paired signals according to stored configuration. The 16 two-to-one multiplexer channels provide the physical signal paths, while the decoder and 16-word by 12-bit memory supply organized control information. This architecture is useful for maintaining older interface and peripheral equipment without redesigning every routing decision in discrete TTL packages. Board engineers should pay particular attention to fan-out, setup timing, unused inputs, and the exact 40-pin DIP assignment.

🔧

Legacy Equipment Maintenance

The SN74LS612N is particularly relevant to repair, replication, and modernization of legacy computers and industrial controllers that still use bipolar TTL memory mappers. Its monolithic integration of sixteen decoded channels, a 16-word by 12-bit memory, and sixteen multiplexer paths preserves the architecture of the original equipment. A like-for-like circuit is appropriate when exact pinout, timing, logic levels, and environmental limits are satisfied. If any of those characteristics differ, a redesign using current logic devices should be evaluated rather than treating the replacement as a simple board swap.

Resumen de productos recomendados

SN74LS610 Related 74LS memory-mapper family member Se usa en: Microprocessor Address Decoding, Memory-Space Expansion, Peripheral Port Multiplexing, Programmable Channel Selection, Data-Routing Control, Legacy Equipment Maintenance SN74LS613 Related 74LS memory-mapper family member Se usa en: Microprocessor Address Decoding, Memory-Space Expansion, Peripheral Port Multiplexing, Programmable Channel Selection, Data-Routing Control, Legacy Equipment Maintenance
What is the Texas Instruments SN74LS612N?
The SN74LS612N is a 40-pin bipolar TTL memory-mapper integrated circuit for legacy address-decoding and signal-routing systems. According to the manufacturer datasheet for the SN74LS612 family, the device combines a 4-line-to-16-line decoder, a 16-word by 12-bit random-access memory, and 16 channels of 2-line-to-1-line multiplexers. Its integrated blocks provide programmable channel selection without requiring the same number of separate decoder and routing packages.
What functions are integrated into the SN74LS612N?
The SN74LS612N integrates a 4-line-to-16-line decoder, a 16-word by 12-bit memory, and 16 two-to-one multiplexers. According to the Texas Instruments SN74LS612 family datasheet, the decoder establishes selectable destinations, the memory stores routing or control information, and the multiplexers select between paired signal lines. Combining these three functions makes the device useful for compact address expansion, programmable I/O routing, and legacy peripheral-control designs.
What package and pin count does the SN74LS612N use?
The SN74LS612N uses a through-hole 40-pin PDIP package. The package information is identified in the manufacturer-family documentation and distributor listings for the exact SN74LS612N orderable device. Because the SN74LS612 family includes related 40-pin devices, engineers should use the pin-description table for SN74LS612N when assigning signals. Do not infer individual pin functions from a photograph or a generic 40-pin outline.
Where can I download the SN74LS612 datasheet PDF?
The SN74LS612 family datasheet can be obtained from the Texas Instruments product-documentation link listed for SN74LS612, while an indexed PDF mirror is also available through the SN74LS612 datasheet archive. The family document is identified as a 10-page publication in the indexed record. Use the manufacturer document for final design decisions because the third-party archive may not reproduce every revision, ordering table, or graphical detail.
Where can I find the SN74LS612N pinout?
The SN74LS612N pin assignments are shown in the manufacturer datasheet's pin-description table. The exact device is a 40-pin PDIP, but the family overview alone is not sufficient to reconstruct every signal. Before routing a PCB or replacing the installed circuit, map each physical pin against the SN74LS612N table, including power, ground, control inputs, decoder outputs, memory interface lines, and multiplexer connections.
Where can I buy SN74LS612N and check current availability?
Current SN74LS612N commercial availability and a quotation can be requested through XAIPART's Request a Quote form on this page. Current distributor search results identify exact SN74LS612N listings, including a listing that reports the part ships today, but inventory changes continuously. Submit the required quantity, package, and target quantity information through the quote form to receive the current commercial response.
What is the price of SN74LS612N?
The current commercial price for SN74LS612N is obtained through XAIPART's Request a Quote form on this page. The form is the appropriate route for an exact-match quote because this legacy 40-pin logic IC may have different lead times or minimum-order quantities across supply channels. Submit the exact MPN SN74LS612N, required quantity, and intended delivery schedule so the quotation can reflect the current market.
What is the lead time for SN74LS612N?
The current lead time for SN74LS612N should be confirmed through XAIPART's Request a Quote form on this page. Because availability can change between production, distribution, and maintenance inventory, the quotation should state the requested quantity and required delivery date. The exact 40-pin PDIP package and SN74LS612N suffix should appear on the request to avoid quotation or assembly mismatches.
Is SN74LS612N in stock?
SN74LS612N is currently offered through multiple distribution listings, including a result that reports the exact part ships today, but inventory is not permanent. Use XAIPART's Request a Quote form on this page for a current stock confirmation and delivery schedule. State the required quantity of SN74LS612N in the 40-pin PDIP package so the response corresponds to the exact orderable device.
What is the difference between SN74LS612N and SN74LS610?
SN74LS612N and SN74LS610 belong to the same Texas Instruments 74LS memory-mapper family but are not automatically interchangeable. According to the family datasheet listing, the related family includes SN74LS610, SN74LS612, and SN74LS613, while the SN74LS612 architecture includes a 4-to-16 decoder, a 16-word by 12-bit memory, and 16 multiplexed channels. Treat them as functional relatives and verify the complete pinout and internal organization before considering substitution.
Is SN74LS612N the same as SN74LS613?
No. SN74LS612N and SN74LS613 are related members of the 74LS memory-mapper family, not identical orderable devices. The SN74LS612N combines a 4-to-16 decoder, a 16-word by 12-bit memory, and 16 two-to-one multiplexer channels. A functional resemblance is not sufficient for board replacement; power connections, control signals, and every external signal must match the relevant manufacturer's pin table.
When should I choose SN74LS612N over a modern logic alternative?
Choose SN74LS612N when maintaining a legacy system that requires its exact TTL interface, internal decoder, stored routing table, and 40-pin PDIP footprint. A modern FPGA, CPLD, or reprogrammable logic device can provide broader functionality, but it normally requires different supply rails, timing, and board-level integration. For repair or faithful replication, select SN74LS612N only after confirming electrical levels, timing, and every pin connection against the manufacturer datasheet.
What is the best drop-in replacement for SN74LS612N?
No confirmed drop-in replacement for SN74LS612N is established by the manufacturer documentation or cross-reference results identified for this page. A replacement must match the 40-pin PDIP footprint, pin functions, TTL logic levels, timing, memory organization, decoder width, and multiplexer behavior; merely sharing a 74LS family or memory-mapper description is insufficient. Submit the target's pinout and operating conditions with the Request a Quote request for compatibility review.
Can another manufacturer's 74LS612 replace SN74LS612N?
A second-source 74LS612 may be considered only after its manufacturer confirms an exact 40-pin pinout and matching electrical timing. The cross-reference material identifies multiple manufacturers for the broader 74LS612 family, but it does not establish a specific cross-brand MPN as a verified drop-in replacement for SN74LS612N. Compare power rails, input thresholds, output levels, decoder and memory organization, multiplexer mapping, and temperature limits before approving any substitution.
What key specifications should engineers know about SN74LS612N?
The defining SN74LS612N specifications are its 40-pin PDIP package, 4-line-to-16-line decoder, 16-word by 12-bit memory, and 16 channels of 2-line-to-1-line multiplexers. According to the Texas Instruments family datasheet, all four blocks are integrated on one monolithic memory-mapper IC. Supply voltage, propagation delay, temperature limits, and current ratings should be taken directly from the exact datasheet revision when sizing clocks, loads, and thermal conditions.

Datos de referencia de ingeniería para SN74LS612N — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Select SN74LS612N when restoring or replicating a legacy TTL system whose original design depends on a 40-pin memory mapper with a 4-line-to-16-line decoder, 16-word by 12-bit memory, and sixteen two-to-one multiplexer channels. It is appropriate when preserving the original interface, timing, and through-hole architecture is more important than redesign flexibility. A current FPGA, CPLD, or modern logic IC may offer greater configurability, but it normally requires different power, timing, and PCB architecture. SN74LS610 and SN74LS613 are useful family references, not automatic drop-in choices, because their internal organization and pin functions must be compared with the target board. Before approving any alternative, require an exact 40-pin mapping, compatible TTL thresholds and output levels, equivalent timing, and matching control behavior. For a non-legacy new design, programmable logic may be preferable; for maintenance of proven equipment, an exactly documented SN74LS612N provides the closest architectural continuity.

Comparación con alternativas

Parámetro Este producto
Brand Texas Instruments
Package PDIP-40
Pin Count 40 pins
Decoder Configuration 4-line-to-16-line decoder
Memory Organization 16 words by 12 bits
Multiplexer Configuration 16 channels of 2-line-to-1-line multiplexers
Logic Family 74LS bipolar TTL logic
Mounting Type Through-hole

Notas de diseño

Assign every physical connection from the SN74LS612N pin-description table before laying out the board. The 40-pin PDIP footprint does not establish signal identity by itself, and related SN74LS610 or SN74LS613 devices can have different internal organizations. Keep the decoder, memory-interface, and multiplexer routes separated where possible to reduce accidental coupling between address-control signals and routed data. Confirm the orientation of pin 1 and the physical notch or pin-1 marker on the assembled board.

Use the manufacturer timing information to establish setup, hold, pulse-width, and output-transition requirements for every connected signal. The internal 16-word by 12-bit memory and sixteen multiplexer channels make control sequencing central to correct operation. Avoid adding long branches to high-fan-out logic lines, and keep clock or enable traces short where they cross memory-control routing. Validate the complete board with the intended load because a functioning unloaded circuit may not reveal timing margin problems.

Do not substitute a generic 74LS decoder, register, or multiplexer for the SN74LS612N. The integrated architecture includes a 4-to-16 decoder, a 16-word by 12-bit memory, and sixteen two-to-one multiplexer channels, so partial functional similarity is insufficient. Before assembly, compare supply requirements, input thresholds, output levels, timing, memory organization, control functions, and all 40 pins. Also confirm that unused inputs are handled exactly as directed by the manufacturer datasheet.

Provide a straightforward through-hole layout with adequate spacing for the 40-pin PDIP and maintain conventional component-orientation and silkscreen practices. For repair boards, use the original circuit's pin numbering as the starting point and then verify every net against the exact SN74LS612N documentation. Avoid combining long memory-control routes with adjacent multiplexer inputs, and provide a sensible ground-return path beneath the circuit board. Prototype first if the original equipment has long interconnects or unusual loading.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The identified manufacturer-family documentation does not explicitly establish the requested compliance status. Automotive qualification is not applicable to this general-purpose legacy logic device.

Búsquedas relacionadas

SN74LS612N datasheet SN74LS612N datasheet pdf SN74LS612N pinout SN74LS612N DIP-40 pinout SN74LS612N equivalent SN74LS612N replacement SN74LS612N cross reference SN74LS612N vs SN74LS613 SN74LS612N vs SN74LS610 SN74LS612N price SN74LS612N stock Texas Instruments SN74LS612N SN74LS612N application circuit SN74LS612N memory mapper

Componentes & términos relacionados

Texas Instruments SN74LS612N SN74LS612 SN74LS610 SN74LS613 Memory mapper Memory-mapper integrated circuit TTL logic 74LS logic family Bipolar TTL Logic IC Interface IC Semiconductor Address decoder 4-line-to-16-line decoder 16-word by 12-bit random-access memory 2-line-to-1-line multiplexer Multiplexer channels PDIP-40 40-pin through-hole package Surface-mount package hierarchy not applicable Microprocessor address decoding Memory-space expansion Peripheral port multiplexing Programmable channel selection
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ