STM32F372V8H6 - 72MHz Cortex-M4 64KB MCU | STMicroelectronics
N.º de pieza: STM32F372V8H6 ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
STM32F372V8H6 Descripción general
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The STM32F372V8H6 belongs to the STM32F3 performance-oriented family and is based on the ARM Cortex-M4 32-bit RISC architecture. It is intended for applications in which an embedded controller must execute firmware, manage inputs and outputs, and support multiple peripheral functions without using separate logic devices.
The verified product data identifies the ARM Cortex-M4 core, a maximum operating frequency of 72 MHz, and 64 KB of Flash memory. The distributor listing also identifies the MCU as a 32-bit device. Flash memory provides nonvolatile program storage, allowing firmware to remain in the device when power is removed. The Cortex-M4 architecture is suitable for control logic, signal processing, communications, and embedded products requiring deterministic instruction-based operation.
The STM32F372V8H6 uses the 100-UFBGA package designation reported by DigiKey, Mouser, and other distributor results. A ball-grid-array package provides a dense connection pattern and is intended for surface-mount assembly. The verified data does not include a complete pin-by-pin datasheet pinout, package drawing, operating voltage, RAM size, ADC characteristics, communication peripheral list, or electrical absolute maximum ratings, so those details should be confirmed in the official STMicroelectronics documentation before layout or firmware release.
Typical application domains include industrial control equipment, sensor and measurement systems, compact automation products, communications modules, and consumer or embedded control products. The 72 MHz Cortex-M4 operating point provides useful performance for control-loop work and protocol handling, while the 64 KB Flash capacity constrains firmware and data-storage planning. Applications requiring larger memory, more analog resources, or additional communication functions should verify the complete peripheral configuration.
The main design consideration is package-level planning. Because the target uses a 100-UFBGA package, the PCB must provide adequate escape routing, solderable land geometry, thermal and assembly planning, and manufacturing capability for the selected ball pitch and package dimensions. Do not substitute a different package or pin arrangement without verifying the complete STMicroelectronics pinout, electrical limits, and board footprint.
This product page consolidates verified distributor specifications, package information, sourcing links, and engineering guidance for STM32F372V8H6 evaluation. It does not infer unprovided electrical specifications or claim a drop-in replacement unless the manufacturer or verified cross-reference data confirms package and pin compatibility.
Alternativas directas para STM32F372V8H6 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
No hay alternativas directas disponibles para este producto.
Solicitar alternativasSTM32F372V8H6 Valores máximos y características eléctricas
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Core | ARM Cortex-M4 |
| Maximum Frequency | 72 MHz |
| Flash Memory | 64 KB |
| Architecture | 32-bit RISC |
| Series | STM32F3 |
| Encapsulado | 100-UFBGA (7x7 mm) |
| Package Type | 100-ball ultra-fine-pitch BGA |
| Tipo de montaje | Surface mount |
| Supplier Description | ARM Cortex-M4 STM32F3 Microcontroller IC |
| Memory Organization | 64K x 8 Flash |
Guía de configuración de pines de STM32F372V8H6 100-ball ultra-fine-pitch bga
Configuración de pines para STM32F372V8H6 (encapsulado 100-ball ultra-fine-pitch bga). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM32F372V8H6.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM32F372V8H6 es adecuado para 6 aplicacións: Industrial Control Equipment, Sensor and Measurement Systems, Communications Modules, Embedded Automation Products, Consumer and Portable Devices, LED and Display Control.
Industrial Control Equipment
STM32F372V8H6 fits compact industrial-control designs that need a 32-bit ARM Cortex-M4 core capable of operating up to 72 MHz while using a dense 100-UFBGA, 7 mm by 7 mm package. The MCU can execute control logic, manage digital I/O, and support protocol handling in space-constrained controller boards. Designers should confirm supply voltage, timer, communications, watchdog, operating-temperature, and qualification requirements in the official STMicroelectronics documentation before production release.
Recomendado
Sensor and Measurement Systems
The STM32F372V8H6's verified 72 MHz ARM Cortex-M4 processing capability is appropriate for embedded sensor hubs that combine acquisition control, filtering, calibration, and communications. Its 64 KB Flash provides nonvolatile firmware storage, while the 100-UFBGA package helps reduce board area. The supplied data does not specify ADC channels, resolution, analog supply limits, or sensor timing, so analog front-end selection must be based on the official datasheet.
Recomendado
Communications Modules
STM32F372V8H6 can serve as the control processor in compact communications equipment where a 72 MHz Cortex-M4 core provides deterministic instruction throughput and 64 KB of Flash supports embedded firmware. The device may be evaluated for UART, SPI, I2C, or other serial functions only after the exact peripheral configuration is confirmed from the STMicroelectronics STM32F372 documentation. Board layout must also account for the 100-UFBGA footprint and RF or transceiver requirements.
Recomendado
Embedded Automation Products
The STM32F372V8H6 is a candidate for embedded automation controllers that require a compact processor, 32-bit arithmetic, and nonvolatile 64 KB Flash. The Cortex-M4 operating frequency supports responsive state-machine and control-loop execution, while the 100-UFBGA package supports high-density PCB assembly. Confirm the required peripheral set, memory headroom, voltage range, temperature range, and safety-related behavior before integrating it into automation equipment.
Recomendado
Consumer and Portable Devices
STM32F372V8H6 may be considered for compact consumer or portable products that need an efficient 32-bit Cortex-M4 core and a small surface-mount package. The verified 72 MHz maximum frequency supports general embedded tasks, and 64 KB Flash is suitable for moderate firmware rather than large graphical applications. Battery-powered designs must verify sleep modes, active current, clock configuration, and analog specifications, which are not included in the supplied verified snippets.
Recomendado
LED and Display Control
STM32F372V8H6 can evaluate for LED, display, and general lighting-control products where a microcontroller must sequence outputs, respond to user inputs, and manage system logic. The 72 MHz Cortex-M4 core provides more performance headroom than basic 8-bit control, while the compact 100-UFBGA package assists board miniaturization. LED current drivers, display timing, PWM channels, electrical limits, and package assembly details are not specified in the verified data and require separate confirmation.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para STM32F372V8H6 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | STMicroelectronics |
| Package | 100-UFBGA (7x7 mm) |
| Core | ARM Cortex-M4 |
| Maximum Frequency | 72 MHz |
| Flash Memory | 64 KB |
| Architecture | 32-bit RISC |
| Series | STM32F3 |
| Drop-in Status | No verified drop-in alternatives found |
Diferenciadores clave
- Verified 72 MHz ARM Cortex-M4 processing point (frente a STM32F373VBH6)
- Verified 64 KB Flash configuration (frente a STM32F373VBH6)
- Compact 100-UFBGA package (frente a STM32F412VGH6)
Notas de diseño
Treat the 100-UFBGA footprint as a manufacturing-critical design item. Before routing, obtain the official package drawing and land pattern, then verify ball pitch, pad dimensions, solder-mask definition, component placement tolerances, and assembly capability. A package label alone is not sufficient to define a reliable PCB footprint, especially for a 7 mm by 7 mm ultra-fine-pitch BGA.
Do not select power rails or decoupling values until the official STM32F372V8H6 datasheet supplies the operating-voltage range, current limits, internal regulator requirements, and pin-specific power conditions. The supplied verified results identify a 3 V-related distributor description but do not provide a complete electrical table. Validate supply tolerances, startup behavior, reset requirements, and local bypass placement against the manufacturer reference design.
Avoid assuming that any 100-BGA STM32 device is interchangeable with STM32F372V8H6. The supplied cross-reference results include STM32F373VBH6, STM32F412VGH6, STM32F072RBH6, STM32F103VCH6, and STM32L152VCH6D as comparison references, but they do not prove identical pinout, memory map, peripheral mapping, voltage range, or firmware behavior. Confirm every pin and software migration requirement before substitution.
Plan the 100-UFBGA fanout with short, symmetric escape routes for high-speed or sensitive signals, while preserving the manufacturer-recommended power and ground distribution. Keep analog, clock, and digital return paths controlled only after the complete pinout and electrical requirements are known. Because no verified pinout or layout guidance is supplied, do not finalize signal-integrity or grounding geometry from general MCU assumptions.
Firmware planning should account for the verified 64 KB Flash limit. Reserve space for startup code, bootloader integration, interrupt handlers, application logic, calibration data, and future updates; the supplied data does not specify RAM, bootloader, or external-memory resources. Confirm linker placement and update strategy against the device memory map in the official documentation.
Información de cumplimiento
The supplied verified snippets do not extract RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. Confirm these attributes with STMicroelectronics and the applicable distributor documentation.
