STM32G473CBU6 - 170MHz Cortex-M4 MCU, 128KB | STMicroelectronics
N.º de pieza: STM32G473CBU6 ✓ ActivoSTM32G473CBU6 Descripción general
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. The STM32G4 family extends this definition with 170 MHz execution, a hardware math accelerator, fast analog converters, and advanced timers. Its architecture sits within the hierarchy of embedded processor, microcontroller, and semiconductor, providing real-time control without the cost and complexity of an external digital signal processor.
Key features include up to 213 DMIPS, 128 KB of Flash, and 128 KB of SRAM. The device supports 1.8 V, 2.5 V, and 3.3 V operation, while its high-resolution analog resources support precision sensing and control. The math accelerator accelerates filter and signal-processing workloads, reducing CPU burden in motor drives, power systems, and audio front ends. A 48-pin UFQFPN package also supports compact board layouts with a thermal-pad connection for improved heat dissipation.
The STM32G473CBU6 uses an Arm Cortex-M4 processor with single-precision floating-point capability and a hardware math accelerator. The 128 KB Flash memory provides room for application firmware, parameter tables, and calibration data, while 128 KB of SRAM supports working buffers and real-time data paths. Its operating-voltage options allow integration with 1.8 V, 2.5 V, or 3.3 V system rails, and the exposed-pad package assists thermal performance during sustained processing.
Typical applications include digital power supplies, motor-control boards, industrial sensor hubs, high-resolution measurement systems, and communications-enabled control equipment. The math accelerator is particularly useful when implementing filtering, transforms, and control algorithms, while the analog peripherals suit current sensing and closed-loop regulation. Developers can also pair the controller with external transceivers or power stages to build complete industrial subsystems.
When laying out the board, connect the exposed thermal pad to a low-impedance ground plane and route analog and digital return currents carefully. Keep analog inputs away from high-current switching nodes, provide local decoupling at supply pins, and follow the pin and thermal recommendations in the manufacturer datasheet. Validate the analog reference and ground arrangement with measurements on the final PCB because package placement alone cannot compensate for poor return-path design.
Alternativas directas para STM32G473CBU6 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con STM32G473CBU6 (mismo factor de forma y huella) — difiere en Package, SRAM, Math Accelerator, Product Type.
STM32G473CCU6
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →STM32G473EBU6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM32G433CBU6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM32G491CBU6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM32G441CBU6
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →STM32G473CBU6 Valores máximos y características eléctricas
| Product Type | 32-bit ARM Cortex-M4 Microcontroller |
| CPU Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 170 MHz |
| Peak Performance | 213 DMIPS |
| Flash Memory | 128 KB |
| SRAM | 128 KB |
| Math Accelerator | Yes, hardware math accelerator |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Encapsulado | 48-pin UFQFPN, 7 x 7 mm |
| Recuento de pines | 48 pins |
| Tipo de montaje | Surface Mount |
| Exposed Pad | Yes, exposed thermal pad |
| Core Architecture | 32-bit RISC |
| Analog Feature Class | High analog performance |
| Flash Memory Organization | 128K x 8 bits |
Guía de configuración de pines de STM32G473CBU6 48-pin ufqfpn, 7 x 7 mm
Configuración de pines para STM32G473CBU6 (encapsulado 48-pin ufqfpn, 7 x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM32G473CBU6.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM32G473CBU6 es adecuado para 6 aplicacións: Digital Power Supply Control, Brushless DC Motor Control, Industrial Sensor Hub, Precision Data Acquisition, Industrial Communication Gateway, Real-Time Signal Conditioning.
Digital Power Supply Control
The STM32G473CBU6 fits digital power converters where fast control calculations and accurate analog measurements are essential. Its 170 MHz Arm Cortex-M4 core reaches up to 213 DMIPS, while the hardware math accelerator can reduce the processing load associated with compensation and filtering. The 128 KB Flash stores control firmware and calibration tables, and 128 KB of SRAM accommodates loop buffers. In a 3.3 V or 1.8 V system, engineers can use the high-performance analog section with external current and voltage sensing networks, then drive an external MOSFET bridge through the advanced timer peripherals.
Recomendado
Brushless DC Motor Control
The STM32G473CBU6 is suitable for brushless motor controllers that require deterministic current sampling, PWM generation, and real-time fault handling. Its 170 MHz Cortex-M4 core provides substantial computation for commutation and current-loop control, and the hardware math accelerator supports transformations and filtering. With 128 KB of Flash for motor-control firmware and 128 KB of SRAM for sampled currents and control states, the device can coordinate three-phase timer outputs while monitoring analog feedback. The 48-pin UFQFPN package also keeps the controller compact enough for compact power modules and industrial drives.
Recomendado
Industrial Sensor Hub
The STM32G473CBU6 can serve as the processing center of an industrial sensor hub that combines analog inputs, communication ports, and local data handling. Its 128 KB of SRAM is useful for buffering measurements before transmission, while 128 KB of Flash accommodates protocol stacks, configuration data, and device-specific calibration. Operation from 1.8 V, 2.5 V, or 3.3 V supports integration into varied industrial boards. The high-performance analog section improves the suitability of the device for bridge, resistor-divider, and sensor-conditioning inputs, provided each analog front end is properly referenced and filtered.
Recomendado
Precision Data Acquisition
The STM32G473CBU6 is appropriate for precision measurement systems that combine fast sampling with local real-time processing. The 170 MHz Cortex-M4 core and hardware math accelerator can process acquired samples while leaving memory for calibration tables, filters, and communication buffers. Its 1.8 V, 2.5 V, and 3.3 V supply options allow the controller to operate beside low-energy analog and mixed-signal circuits. Designers can use the 48-pin package to create compact measurement boards, but should verify the selected ADC channels and trigger capabilities against the manufacturer datasheet and preserve clean analog grounding.
Recomendado
Industrial Communication Gateway
The STM32G473CBU6 can act as a protocol-conversion and monitoring gateway for industrial equipment. Its 128 KB of Flash supports networking stacks and application firmware, while 128 KB of SRAM supports protocol conversion, status tables, and buffering. A 3.3 V implementation suits conventional industrial control boards, while the 1.8 V option supports lower-energy interface modules. The advanced timer and analog resources also enable the device to supervise an incoming power rail and perform timing-based system tasks. When implementing communications, maintain signal integrity through controlled trace geometry, series termination where appropriate, and isolated protection at external interfaces.
Recomendado
Real-Time Signal Conditioning
The STM32G473CBU6 is well matched to embedded signal-conditioning tasks such as filtering, windowing, and control-oriented numerical processing. Its hardware math accelerator works alongside the 170 MHz Cortex-M4 core, while 128 KB of SRAM provides space for sample buffers and intermediate results. A 1.8 V system can use the microcontroller directly with suitable external analog components, and the compact 48-pin UFQFPN package supports space-constrained instruments. Validate numerical accuracy and timing during system characterization, and use the exposed pad as a low-impedance thermal and return path to reduce analog offsets and temperature-related errors.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para STM32G473CBU6 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | STM32G473CCU6 | STM32G473EBU6 | STM32G433CBU6 | STM32G491CBU6 | STM32G441CBU6 |
|---|---|---|---|---|---|---|
| Package | 48-pin UFQFPN, 7 x 7 mm | 48-pin UFQFPN, 7 x 7 mm | 48-pin UFQFPN, 7 x 7 mm | 48-pin UFQFPN, 7 x 7 mm | 48-pin UFQFPN, 7 x 7 mm | 48-pin UFQFPN, 7 x 7 mm |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz |
| Flash Memory | 128 KB | 256 KB | 512 KB | 128 KB | 512 KB | 256 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 32 KB | 128 KB | 32 KB |
| Math Accelerator | Yes | Yes | Yes | No | Yes | No |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V |
| Analog and Control Peripherals | High-performance analog set with advanced control timers | High-performance analog set with advanced control timers | High-performance analog set with advanced control timers | Reduced STM32G4 peripheral set | STM32G4 control and analog feature set | Reduced STM32G4 peripheral set |
Diferenciadores clave
- Balanced memory and accelerated numerical processing (frente a STM32G433CBU6)
- Higher Flash density without changing the STM32G473 family architecture (frente a STM32G473CBU6)
- Expanded firmware capacity for feature-rich embedded products (frente a STM32G473EBU6)
- Compact 48-pin analog and control platform (frente a STM32G441CBU6)
Notas de diseño
The 48-pin UFQFPN exposes a thermal pad that must be connected to a low-impedance ground plane with multiple short vias. Estimated: at 25 C ambient, a junction-to-ambient value of 30 C/W would produce a 30 C rise at 1 W dissipation and a 60 C rise at 2 W. Replace this estimate with the package-specific junction-to-ambient value from the manufacturer for the actual PCB and ambient conditions, then verify operation at the highest expected workload.
Keep analog inputs, voltage references, and sensor-conditioning traces away from switching nodes and high-current return paths. Use a continuous ground plane, route analog signals over quiet reference areas, and place decoupling capacitors close to each supply pin. The 1.8 V, 2.5 V, and 3.3 V options do not replace careful rail design; follow the pin table and decoupling recommendations in the manufacturer datasheet for the selected operating configuration.
The hardware math accelerator can reduce processing time in filtering and control algorithms, but CPU utilization still depends on interrupt latency, peripheral access, and code structure. Profile representative loops on the final system rather than assuming the accelerator eliminates all CPU load. Use 128 KB of SRAM for time-critical buffers where possible, keep the Flash wait-state configuration within the recommended operating range, and verify clock settings before commissioning the control loop.
Do not substitute an STM32G4 variant based only on package size and clock frequency. Check the exact 48-pin UFQFPN assignments, exposed-pad connection, supply pins, analog-reference requirements, oscillator pins, debug interface, bootloader configuration, and every peripheral used by the PCB. The G433CBU6 and G441CBU6 alternatives have reduced peripheral sets, while the higher-density STM32G473 variants change available Flash and can alter firmware-loading behavior.
Información de cumplimiento
The manufacturer and distributor records confirm the STM32G473CBU6 identity and package, but the retrieved records do not state RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive-qualification status. Confirm compliance and qualification using the current manufacturer product documentation or declaration before production release.