STM8L052C6T6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
N.º de pieza: STM8L052C6T6 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
STM8L052C6T6 Descripción general
An ultra-low-power MCU is a microcontroller architecture optimized to balance processing capability, standby consumption, and energy efficiency in embedded products. Within the semiconductor hierarchy, this part is an 8-bit MCU, part of the STM8L value line, and part of a broader family of low-power embedded controllers. Its low-power strategy supports duty-cycled sensing, display, metering, and control products where energy efficiency affects battery life.
The STM8L052C6T6 provides 32 KB Flash, 16 MHz maximum core frequency, and 1.8 V to 3.6 V operating supply in the verified data. A separate verified distributor summary reports 2 KB RAM, 256 bytes of EEPROM, an integrated LCD controller, a 25-channel 12-bit ADC, and five low-power modes down to 350 nA. These values distinguish it from general-purpose 8-bit devices when a design depends on LCD drive, mixed-signal acquisition, or very low standby current.
The STM8L family strategy provides a path from the STM8L05xxx value line to related ultra-low-power families. However, software, peripheral availability, clock behavior, and package pin assignments must be checked before substituting another controller. The target's 48-LQFP footprint and 16 MHz class are particularly important because a nominal functional equivalent may still require board changes or firmware migration.
Typical applications include battery-powered smart meters, compact LCD instruments, industrial sensing nodes, medical monitoring equipment, and portable measurement products. Its 1.8 V to 3.6 V range supports low-energy embedded systems, while the LCD and ADC capabilities reduce the need for separate support ICs when those functions are required.
Designers should confirm the complete pinout, alternate-function assignments, clock tree, ADC accuracy, low-mode limits, and programming configuration against the manufacturer datasheet. The T6 package suffix should be verified before layout release because package options and memory-density variants may have different lead counts or peripheral configurations.
This page consolidates verified manufacturer and distributor information, exact package constraints, sourcing references, and design guidance. It distinguishes documented drop-in candidates from unrelated functional alternatives and avoids asserting unverified pricing, pin functions, or lifecycle claims.
Alternativas directas para STM8L052C6T6 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con STM8L052C6T6 (mismo factor de forma y huella) — difiere en Flash Memory, Package.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
STM8L051C6T6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM8L052R8T6
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
Consulte el precio
Ver hoja de datos →STM8L051R8T6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM8L052C6T6 Valores máximos y características eléctricas
| Product Type | 8-bit ultra-low-power microcontroller |
| Product Family | STM8L value line |
| Maximum Core Frequency | 16 MHz |
| Flash Memory | 32 KB |
| RAM Memory | 2 KB |
| EEPROM Memory | 256 byte |
| Tensión de alimentación de funcionamiento | 1.8 V to 3.6 V |
| Rango de temperatura de funcionamiento | -40 °C to 85 °C |
| ADC Resolution | 12-bit |
| ADC Channels | 25 channels |
| LCD Controller | Integrated |
| Low-Power Modes | 5 modes |
| Minimum Low-Power Current | 350 nA |
| Encapsulado | 48-LQFP 7 x 7 mm |
| Número de pines | 48 pins |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de STM8L052C6T6 48-lqfp 7 x 7 mm
Configuración de pines para STM8L052C6T6 (encapsulado 48-lqfp 7 x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM8L052C6T6.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM8L052C6T6 es adecuado para 6 aplicacións: Battery-Powered Smart Meter, LCD-Equipped Measurement Instrument, Industrial Sensor Node, Portable Medical Monitor, Battery-Powered Data Logger, Low-Power Security and Access Panel.
Battery-Powered Smart Meter
The STM8L052C6T6 fits a low-duty-cycle smart meter because its verified 1.8 V to 3.6 V supply range, five reported low-power modes, and 350 nA minimum low-power figure support energy-conscious operation. The reported 25-channel 12-bit ADC can acquire sensor signals, while the integrated LCD controller supports a human-readable display without requiring a separate display controller. Place the MCU between the sensor front end and LCD, and validate the complete measurement cycle because active current, LCD drive, and wake-up frequency will dominate practical battery life.
Recomendado
LCD-Equipped Measurement Instrument
The STM8L052C6T6 is appropriate for compact instruments that combine an LCD with slow-changing analog measurements. Its reported integrated LCD controller reduces system complexity, while the 12-bit 25-channel ADC supports multiple sensor inputs and the 32 KB Flash provides room for application firmware. The 48-LQFP package exposes more pins than a small leadless package, which can simplify routing when display, buttons, and analog inputs must coexist. Confirm display voltage, segment count, glass timing, and alternate-function assignments against the datasheet.
Recomendado
Industrial Sensor Node
The STM8L052C6T6 can serve as the local controller in an industrial sensor node when low standby energy and analog integration matter. The verified 16 MHz core and 32 KB Flash support local acquisition, filtering, diagnostics, and communication control, while the reported 12-bit ADC reduces the need for separate analog conversion. Use the 48-LQFP footprint when adequate I/O and routing flexibility justify its size. Validate sensor accuracy, ADC source impedance, watchdog behavior, and electromagnetic performance under the actual enclosure and wiring conditions.
Recomendado
Portable Medical Monitor
The STM8L052C6T6 may suit portable medical-monitoring products that require local sensing, display control, and low-power operation. Its reported LCD controller, 12-bit ADC, and low-power modes provide a compact feature set for devices that periodically acquire a signal and then sleep. The 1.8 V to 3.6 V range also supports integration with low-voltage sensor and communication circuitry. Medical use still requires application-specific risk analysis, validated measurement accuracy, electrical-safety review, and confirmation that quality and regulatory requirements are met; no medical qualification is inferred here.
Recomendado
Battery-Powered Data Logger
The STM8L052C6T6 is well matched to a duty-cycled data logger that wakes periodically, reads sensors, updates local state, and returns to a low-power mode. The verified 32 KB Flash stores firmware and calibration data, while the reported 2 KB RAM and 256-byte EEPROM support working data and persistent parameters. Its 16 MHz maximum frequency provides useful control bandwidth without implying continuous high-power operation. Estimate battery life using measured active and sleep currents; the reported 350 nA low-power value should be applied only to the conditions under which it was specified.
Recomendado
Low-Power Security and Access Panel
The STM8L052C6T6 can coordinate keypad input, display feedback, and sensor checks in a low-power access panel. Its reported LCD controller supports status prompts, the 12-bit ADC can supervise analog sensing channels, and five low-power modes permit reduced consumption between user events. The 48-LQFP package offers a practical pin count for buttons, display control, communications, and power-management signals. Because security products are sensitive to timing and fault behavior, validate wake latency, watchdog coverage, firmware update strategy, and fail-safe behavior rather than relying only on nominal power specifications.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para STM8L052C6T6 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | STM8L051C6T6 | STM8L052R8T6 | STM8L051R8T6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core Architecture | 8-bit STM8L | 8-bit STM8L | 8-bit STM8L | 8-bit STM8L |
Diferenciadores clave
- Integrated display and analog acquisition (frente a STM8L051C6T6)
- Verified exact 48-LQFP T6 package context (frente a STM8L052R8T6)
- Value-line STM8L compatibility strategy (frente a STM8L051R8T6)
Notas de diseño
Build the power budget from measured mode-specific current rather than the reported 350 nA minimum in isolation. The verified operating range is 1.8 V to 3.6 V, so verify regulator dropout, startup behavior, decoupling, and the voltage required by the LCD and analog sensors. For duty-cycled designs, measure sleep current with the debugger disconnected and with all external pull networks in their normal states. Also test wake-up latency because a very low sleep figure can be outweighed by frequent sampling or display refresh.
Place all decoupling physically close to the corresponding device pins and keep the LCD, ADC, and digital timing paths separated. The ADC has 25 reported channels, so route analog inputs away from switching nodes and high-current return paths. Use a quiet ground strategy and minimize shared copper between analog return currents and digital outputs. Before layout release, verify the 48-LQFP land pattern, pin 1 orientation, exposed thermal behavior if applicable, programming-test access, and every alternate-function assignment against the current manufacturer datasheet.
Do not treat another STM8L family member as a drop-in replacement solely because its core and voltage are similar. Check the package pin count, land pattern, power pins, oscillator pins, reset behavior, LCD mapping, ADC channels, timer assignments, serial interfaces, memory size, and software support. The supplied evidence names STM8L051C6T6, STM8L052R8T6, and STM8L051R8T6 as review candidates, but the search snippets do not provide a complete verified equivalence. Prototype and run peripheral, timing, low-power, brownout, and EMC tests before substitution.
The 48-LQFP footprint provides substantial routing flexibility but requires deliberate escape planning between fine-pitch leads. Confirm pin multiplexing early because LCD, ADC, serial, and timer resources can constrain one another. Keep sensitive analog inputs short and provide nearby analog ground references where the datasheet recommends them. If the design uses an internal LCD driver, account for glass load, bias voltage, and segment capacitance during power-integrity and EMI checks rather than treating it as a low-current digital output.
Información de cumplimiento
The supplied verified product and distributor snippets do not state material-compliance or automotive-qualification status. No compliance claim is inferred.
