STM8L151C3T3 - 8-Bit 16MHz 8KB MCU | STMicroelectronics | IoT
N.º de pieza: STM8L151C3T3 ✓ ActivoSTM8L151C3T3 Descripción general
An ultra-low-power microcontroller is an integrated circuit designed to execute embedded control functions while minimizing energy consumption during active operation, idle periods, and standby modes. The STM8L151 architecture sits within the STM8L family, combining an 8-bit CISC core, digital peripherals, analog interfaces, and low-power management in one package. This integration allows compact products to consolidate sensing, control, communications, and local processing without requiring a separate discrete processor.
The STM8L151C3T3 supports operation up to 16 MHz and provides up to 16 MIPS according to the verified STM8L151x2/3 family description. Its 8 KB Flash memory is suitable for compact firmware rather than resource-intensive applications. A 1.8 V to 3.6 V operating range supports low-voltage systems, while 41 I/O pins provide substantial connectivity for sensors, indicators, communication interfaces, and control signals in a 48-LQFP footprint.
The device belongs to the STM8L low-density platform, whose enhanced STM8 CPU core is designed to retain CISC code density while using a 24-bit linear addressing space. This architecture is useful for cost-sensitive embedded systems where straightforward peripheral access and compact code are important. Because the verified data does not specify the exact peripheral list, RAM capacity, timer configuration, and conversion performance, those details should be confirmed against the official STM8L151C3 datasheet before final design release.
Typical applications include connected environmental sensors, compact industrial controllers, low-power monitoring equipment, and small appliance control modules. The 16 MHz processing capability accommodates time-based control and moderate protocol handling, while the 41 available I/O pins simplify connection to external sensors and actuators. For designs requiring low standby consumption, the STM8L151's low-power architecture is preferable to a general-purpose MCU that remains clocked continuously.
Designers should preserve adequate input-voltage headroom across temperature and production tolerances because the verified operating range extends from 1.8 V to 3.6 V. PCB layout must also accommodate the 48-pin LQFP lead pitch and provide appropriate decoupling at the supply pins. Firmware should use the manufacturer-supported clock, peripheral, and low-power configuration rather than assuming functions or pin assignments that are not documented in the available verified data.
This product record combines verified distributor specifications, lifecycle information, package details, and sourcing references with explicit engineering guidance. It also distinguishes confirmed facts from unavailable parameters, helping engineers evaluate the STM8L151C3T3 for low-voltage embedded-control designs without relying on unverified assumptions.
Alternativas directas para STM8L151C3T3 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
STM8L151C3T6
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
STM8L151C3T3 Valores máximos y características eléctricas
| Product Type | 8-bit ultra-low-power microcontroller |
| Series | STM8L EnergyLite |
| CPU Architecture | 8-bit CISC |
| Maximum Clock Speed | 16 MHz |
| Maximum Processing Performance | 16 MIPS at 16 MHz |
| Flash Memory | 8 KB (8K x 8) |
| Tensión de alimentación de funcionamiento | 1.8 V to 3.6 V |
| I/O Port Count | 41 ports |
| Package Type | 48-LQFP |
| Package Dimensions | 7 mm x 7 mm |
| Recuento de pines | 48 pins |
| Tipo de montaje | Surface mount |
| Addressing Space | 24-bit linear addressing space |
| Estado del ciclo de vida | Active |
| Program Memory Type | Flash |
Guía de configuración de pines de STM8L151C3T3 7 mm x 7 mm
Configuración de pines para STM8L151C3T3 (encapsulado 7 mm x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM8L151C3T3.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM8L151C3T3 es adecuado para 6 aplicacións: Connected Environmental Sensors, Compact Industrial Control Modules, Low-Power Monitoring Equipment, Small Appliance Control, Battery-Powered Sensor Hubs, Cost-Sensitive Embedded Control.
Connected Environmental Sensors
The STM8L151C3T3 fits compact environmental sensing nodes because its STM8L EnergyLite architecture targets low-power operation while the 16 MHz core provides up to 16 MIPS for local acquisition and control. Its 41 I/O ports can connect digital sensors, indicators, and interface components without requiring a large external controller. The 8 KB Flash capacity is sufficient for focused firmware that samples inputs, applies filtering, and reports status. The verified 1.8 V to 3.6 V operating range also supports low-voltage sensor designs. Numerical standby-current and wake-up-time values were not supplied, so battery-life estimates must use the official datasheet limits.
Compact Industrial Control Modules
The STM8L151C3T3 is appropriate for small industrial control modules that need deterministic control logic and numerous local connections without a high-cost application processor. The 8-bit STM8 CISC core operates up to 16 MHz, while 41 I/O ports provide substantial interface capacity for sensors, discrete inputs, relay-driving circuits, and status indicators. Its 48-LQFP package keeps the assembly compact on a multilayer PCB. Because the verified information does not list the complete peripheral complement or environmental ratings, engineers should confirm timer, communication, and industrial qualification requirements before selecting the exact variant.
Low-Power Monitoring Equipment
The STM8L151C3T3 supports low-power monitoring equipment by combining a 16 MHz STM8L core with a 1.8 V to 3.6 V operating range and 41 available I/O ports. These characteristics suit devices that periodically wake, read sensors, evaluate thresholds, update an indicator, and return to a low-energy state. The STM8L EnergyLite classification is especially relevant when standby consumption is more important than maximum processing throughput. Exact sleep currents and wake-up timing are unavailable in the verified records, so battery sizing and duty-cycle calculations must be based on the manufacturer datasheet rather than inferred values.
Small Appliance Control
The STM8L151C3T3 can serve as the local controller in a small appliance where a dedicated MCU must coordinate buttons, indicators, sensors, and simple timing functions. Its 16 MHz operating speed offers useful control responsiveness without requiring a higher-complexity processor, and the 41 I/O ports reduce the need for external I/O expanders. The 1.8 V to 3.6 V supply range is useful for compact mixed-signal power systems. Designers should confirm the verified 8 KB Flash budget against the complete control firmware and review motor, heater, or mains-connected interface isolation independently of the MCU.
Battery-Powered Sensor Hubs
The STM8L151C3T3 is suitable for a battery-powered sensor hub when the product needs local coordination of several low-speed sensors and can operate from a low-voltage rail. Its STM8L EnergyLite architecture, 16 MHz maximum clock, and 41 I/O ports provide a practical balance between responsiveness and board complexity. The 8 KB Flash limit encourages compact firmware and can reduce the need for a separate storage device when the application only performs local aggregation. Actual battery life cannot be derived from the verified data because average current, sleep current, and startup timing are not supplied; obtain those values from the manufacturer documentation.
Cost-Sensitive Embedded Control
The STM8L151C3T3 targets cost-sensitive embedded-control products that need more local control capability than a basic logic device but less software and memory than a general-purpose application processor. Its 8-bit CISC architecture, 8 KB of Flash, 16 MHz clock, and 41 I/O ports cover compact control loops and peripheral coordination. The 48-LQFP package provides a conventional surface-mount assembly option. Before committing to the device, verify the required peripheral mix, RAM, package pinout, and qualification data because those details were not present in the supplied verified specifications.
Datos de referencia de ingeniería para STM8L151C3T3 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | STM8L151C3T6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) |
| Product Type | 8-bit ultra-low-power microcontroller | STM8L151x2/3 ultra-low-power microcontroller |
| Maximum Clock Speed | 16 MHz | Up to 16 MHz |
| Maximum Processing Performance | 16 MIPS at 16 MHz | Up to 16 MIPS |
| Memory Architecture | 8-bit CISC with 24-bit linear addressing space | STM8L151x2/3 family architecture |
Diferenciadores clave
- Closest verified same-family procurement alternative (frente a STM8L151C3T6)
- Low-voltage operation in a compact controller (frente a STM8L151C3T6)
- Substantial local I/O availability (frente a STM8S105C6T6)
Notas de diseño
Design the supply rail to remain within the verified 1.8 V to 3.6 V operating range under load, temperature, and tolerance conditions. Place the required bypass capacitors close to the device's supply and ground pins, using the capacitance and ESR recommendations from the manufacturer datasheet. Because exact decoupling values and low-current limits were not included in the verified records, do not substitute generic values until they have been checked against the official electrical-characteristics and application-information sections.
The 48-LQFP footprint requires adequate copper and thermal-via support beneath the device when its operating conditions warrant heat spreading. Follow the manufacturer land-pattern and solder-reflow recommendations rather than deriving dimensions solely from the 7 x 7 mm body size. Keep sensitive analog routing away from fast digital nets and switching-supply paths, and provide a low-impedance ground return so that the 41 I/O transitions do not create unacceptable supply or reference noise.
Do not assume that another STM8L151C3 ordering suffix is automatically interchangeable without checking the STMicroelectronics ordering table. Confirm package code, temperature range, and other suffix-defined attributes before using STM8L151C3T6 as a substitute. Similarly, a shared LQFP-48 package does not make an STM8S or third-party MCU pin-compatible; verify every pin, power domain, peripheral mapping, interrupt vector, clock configuration, and programming interface.
Battery-operated designs should base energy budgets on the manufacturer's active, idle, and standby currents plus wake-up timing. The verified records establish the STM8L EnergyLite low-power family and 1.8 V to 3.6 V supply range, but they do not provide numerical current values. Measure the complete product sleep current, including pull resistors, sensors, regulators, and leakage paths, then verify firmware behavior in every low-power mode to avoid an incorrect battery-life estimate.
Información de cumplimiento
The supplied verified records identify the device as active and provide ordering and distributor listings, but they do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown pending confirmation from official STMicroelectronics documentation.
