SY89429AJZ - 800MHz Programmable Clock Synthesizer | Microchip
N.º de pieza: SY89429AJZ ✓ ActivoSY89429AJZ Descripción general
A frequency synthesizer is a clock-and-timing semiconductor that generates or transforms an output clock from a stable reference. Its hierarchy extends from a frequency synthesizer to a PLL-based clock generator, clock-and-timing IC, and integrated circuit. This distinction matters because the SY89429AJZ is intended for distributed systems requiring programmable frequency relationships, multiple standard logic levels, and dedicated clock outputs rather than a fixed-frequency oscillator.
The principal device characteristics include an operating frequency of up to 800 MHz, a programmable synthesizer range identified as 25 MHz to 400 MHz, PECL-compatible interfaces, and a selectable reference-input arrangement supporting PECL or crystal-oscillator sources. The integrated divider adds useful clock-generation flexibility, while the 28-LCC package provides a leaded surface-mount option for systems that prefer a mechanically robust package over a leadless land pattern.
Precision Edge architecture is the central implementation detail identified for this device. The architecture supports the high-performance clock-generation role of the SY89429AJZ and is intended for applications such as telecommunications timing, data-conversion clocking, network equipment, and test instrumentation. PECL interfaces are particularly useful where a system already operates with ECL-family signaling and requires the clock synthesizer to integrate into that logic environment without adding level-conversion stages.
Typical uses include low-jitter clock generation, frequency multiplication and division, synchronous digital-system timing, and clock distribution for communication and instrumentation equipment. Designers can also place the device ahead of a downstream divider network when a system requires several related frequencies derived from one reference. PECL interface compatibility can simplify interconnects when the synthesizer and receiving logic share compatible termination and biasing arrangements.
The primary design consideration is PCB implementation of a 28-LCC J-lead package at high clock rates. Trace routing, return paths, decoupling, input/output termination, and reference-source stability directly affect signal integrity. Follow the manufacturer datasheet for the exact pin assignments, recommended application circuit, component values, and layout constraints before releasing a production board.
This product page combines the manufacturer-facing device description with package, application, procurement, and replacement guidance. It also distinguishes the electrically identified SY89429AJZ from its SY89429AJZ-TR ordering variant and separates verified drop-in alternatives from generic cross-reference search tools that do not establish pin compatibility.
Alternativas directas para SY89429AJZ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasSY89429AJZ Especificaciones
| Device Type | Programmable frequency synthesizer IC |
| Architecture | Precision Edge |
| Maximum Operating Frequency | 800 MHz |
| Programmable Frequency Range | 25 MHz to 400 MHz |
| Input Interface | PECL or crystal oscillator |
| Output Interface | PECL |
| Frequency Divider | Yes |
| Encapsulado | 28-LCC (J-Lead) |
| Package Type | Leaded ceramic LCC, surface mount |
| Recuento de pines | 28 pins |
| Device Class | Clock synthesizer / jitter cleaner |
| Technology | Programmable frequency synthesis |
| Lead-Free Status | Lead-free |
Guía de configuración de pines de SY89429AJZ leaded ceramic lcc, surface mount
Configuración de pines para SY89429AJZ (encapsulado leaded ceramic lcc, surface mount). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para SY89429AJZ.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SY89429AJZ es adecuado para 6 aplicacións: Telecommunications Clock Generation, High-Speed Digital Logic Timing, Data Conversion and ADC Clocking, Test and Measurement Instrumentation, Network Equipment Timing, Industrial Synchronization Systems.
Telecommunications Clock Generation
The SY89429AJZ fits telecommunications timing systems requiring programmable clock generation up to 800 MHz with PECL-compatible interfaces. Its selectable PECL or crystal-oscillator input allows the reference architecture to align with the system clock source, while the integrated divider supports related output frequencies derived from a common reference. In a line-card or optical-network design, the device can provide a local synthesized clock for high-speed logic. The primary engineering consideration is maintaining a clean reference and providing correct PECL termination and biasing to preserve edge quality across the interconnect.
Recomendado
High-Speed Digital Logic Timing
The SY89429AJZ can supply a programmable clock for high-speed digital logic where frequencies must be derived consistently from a stable reference. Its operating capability reaches 800 MHz, its programmable synthesis band is identified as 25 MHz to 400 MHz, and the divider function supports multiple related timing domains. This makes the part useful in interface, processing, and test subsystems requiring deterministic clock relationships. Board implementation must account for package-routing inductance, continuous return paths, local decoupling, and the clock receiver’s input threshold requirements.
Recomendado
Data Conversion and ADC Clocking
The SY89429AJZ is applicable to data-conversion systems that need a programmable sampling clock and deterministic division from a reference source. The device’s 25 MHz to 400 MHz programmable range, operation up to 800 MHz, PECL outputs, and integrated divider permit clock routing to multiple converter channels. Using one synthesizer can reduce the number of unrelated oscillators in a multi-channel instrument, provided each channel’s required frequency can be produced by the supported divider configuration. Timing skew and jitter performance must be evaluated for the converter’s required sampling accuracy.
Recomendado
Test and Measurement Instrumentation
The SY89429AJZ can support laboratory and production-test equipment that requires programmable clock outputs at controlled frequencies. Its synthesizer and divider functions allow a single reference arrangement to produce clock relationships for acquisition, excitation, or digital calibration subsystems. The 800 MHz maximum operating frequency is useful for higher-speed test paths, while PECL output signaling suits equipment that already uses compatible logic levels. Layout should minimize clock-loop area and use the manufacturer application circuit to establish suitable reference, termination, and decoupling arrangements.
Recomendado
Network Equipment Timing
The SY89429AJZ is suited to network equipment timing blocks that need flexible frequency generation from a common reference. Its PECL interface, 25 MHz to 400 MHz programmable range, up-to-800 MHz operating capability, and divider output function allow clocking for line cards, aggregation logic, and serialization subsystems. A robust implementation requires careful partitioning of clock and data routes, continuous reference planes, and output termination matched to the receiver. Engineers should also verify startup, lock behavior, and clock valid handling against the system’s sequencing requirements.
Recomendado
Industrial Synchronization Systems
The SY89429AJZ can support industrial synchronization where multiple machine-control or test subsystems require coherent, programmable clock signals. The integrated divider helps create related frequencies, while PECL outputs can connect to compatible logic stages in equipment designed for high-speed clock distribution. The 28-LCC J-lead package offers a leaded surface-mount option for boards with suitable mechanical and assembly capability. In production designs, use the manufacturer’s recommended decoupling and reference-network values and validate timing margins across temperature and supply tolerance.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para SY89429AJZ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | Microchip Technology |
| Package | 28-LCC (J-Lead) |
| Device Type | Programmable frequency synthesizer IC |
| Architecture | Precision Edge |
| Maximum Operating Frequency | 800 MHz |
| Programmable Frequency Range | 25 MHz to 400 MHz |
| Input Interface | PECL or crystal oscillator |
| Output Interface | PECL |
| Frequency Divider | Yes |
| Special Features | Precision Edge architecture and integrated frequency divider |
Diferenciadores clave
- Combines programmable synthesis with a high operating frequency (frente a SY89429AJZ-TR)
- Native PECL clock interfaces (frente a Generic fixed-frequency oscillator alternatives)
- Reference and division functions in one device (frente a Discrete oscillator-and-divider clock trees)
Notas de diseño
Route the reference, clock outputs, power connections, and ground returns using the manufacturer application layout as the baseline. Keep output paths short and controlled, maintain a continuous return plane beneath clock routes, and avoid crossing clock traces over split power or ground planes. PECL links require correct source and load termination; verify the complete interface network against the receiver specification rather than assuming that every PECL endpoint uses the same termination arrangement.
Place the manufacturer-recommended bypass capacitors at the corresponding power pins and keep the supply return path short and low-inductance. A programmable synthesizer’s phase-noise and jitter performance can be affected by supply noise and reference-source variation, particularly when driving clock edges near the device’s upper operating frequency. Confirm capacitor ratings and tolerances against the recommended network, and verify startup and supply sequencing at the system level.
Treat every PECL clock output as a high-speed transmission line when routing becomes electrically long. Use the manufacturer’s recommended termination values, control trace geometry, and keep the clock away from high-current switching nodes. The integrated divider can simplify clock distribution, but each generated output still requires an appropriate load and termination. Validate eye quality, overshoot, and ringing with the actual receiver and enclosure configuration.
Do not confuse the SY89429AJZ with the SY89429AJZ-TR ordering suffix without checking the manufacturer ordering table. The two listings identify the same 800 MHz, 28-LCC device class, but production packaging and marking requirements can differ. Also avoid using generic PLCC pinouts or cross-reference search results as substitutes; assign pins and replacement parts only from device-specific documentation and verified package compatibility.
Información de cumplimiento
The SY89429AJZ-TR ordering variant is identified as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status were not established by the cited product information.