Microchip Technology

SY89535LHC - 500MHz Clock Synthesizer | Microchip

N.º de pieza: SY89535LHC ✗ Fin de vida
3.3 V Vdss LVDS and LVPECL Rds(on) 64-pin TQFP Package 33 MHz to 500 MHz Speed
MOQ: 1 |

SY89535LHC Descripción general

The Microchip SY89535LHC is a 3.3 V precision programmable bus-clock synthesizer with an output-frequency range of 33 MHz to 500 MHz, differential LVDS and LVPECL outputs, and a 64-pin TQFP package. The integrated PLL includes bypass capability, allowing the device to support systems that need synthesized or bypassed clocking modes.

A programmable clock synthesizer is a clock-and-timing IC that generates one or more deterministic output frequencies from a reference input. Clock synthesizer belongs to the broader PLL and frequency-generator hierarchy, where the PLL locks a reference-derived output to a stable frequency. LVPECL and LVDS are differential high-speed signaling families used to distribute low-jitter timing signals across demanding digital systems.

The SY89535LHC accepts CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL input formats. Its differential LVDS and LVPECL outputs support communication equipment, network infrastructure, processor clocking, and high-speed test systems. The integrated synthesizer and fanout-buffer arrangement reduces the number of separate clock-generation and distribution stages required in a multi-output design.

Operating from a 3.3 V supply, the device operates from 33 MHz to 500 MHz according to the product description. The output architecture supports LVPECL operation over the higher-frequency range, while the clock-generation section can work with single-ended or differential reference arrangements. A 160 MHz input or differential reference is identified for the programmable output architecture, while the exact divider, multiplication, and jitter limits must be confirmed from the manufacturer pin and electrical tables before final timing-budget approval.

Typical installations include telecommunications line cards, serial-interface equipment, data-conversion systems, network switches, instrumentation, and test-and-measurement platforms. The multiple logic standards make the device useful in mixed-interface clock trees where a common reference must fan out to several clock domains without requiring separate source devices.

PCB implementation must account for high-speed differential routing, controlled impedance, short return paths, and adequate decoupling of the 3.3 V supply. Differential pairs should remain continuously referenced to a solid ground plane, and unused outputs should be terminated according to the manufacturer's output-enable and unused-pin guidance. Differential clock routing also requires length matching sufficient for the selected LVDS or LVPECL data rate.

This page combines the device's clock-range, logic-standard, package, and lifecycle characteristics with practical PCB guidance, sourcing instructions, and a structured comparison framework. It is intended to help engineers determine whether the obsolete SY89535LHC remains suitable for a new design, a repair, or a controlled legacy-system continuation.

Alternativas directas para SY89535LHC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

SY89535LHC Especificaciones

Tensión de alimentación 3.3 V
Output Frequency Range 33 MHz to 500 MHz
Reference Input Range 160 MHz single-ended or differential
Output Logic Standards LVDS and LVPECL
Input Logic Standards CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL
PLL Yes, with bypass
Device Type Programmable clock and frequency synthesizer
Number of Circuits 1
Encapsulado 64-pin TQFP
Tipo de montaje Surface mount
Rango de temperatura de funcionamiento 0°C to +85°C
Product Series Precision Edge
Part Status Obsolete
Configuración de salida Differential
Clock Source Programmable PLL with bypass

Guía de configuración de pines de SY89535LHC 64-pin tqfp

Configuración de pines para SY89535LHC (encapsulado 64-pin tqfp). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 64-pin tqfp para SY89535LHC

No hay datos detallados de patillaje disponibles para SY89535LHC.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

SY89535LHC es adecuado para 6 aplicacións: Telecommunications Line Cards, Network Switching Equipment, High-Speed Data Conversion, Test and Measurement Equipment, Processor Interface Clocking, Industrial Communication Equipment.

🌐

Telecommunications Line Cards

The SY89535LHC is suitable for distributing deterministic clocks within telecommunications line-card and interface assemblies. Its 33 MHz to 500 MHz programmable range and differential LVDS or LVPECL outputs support high-speed backplanes, serial links, and recovery-clock distribution. The 3.3 V architecture reduces complexity in line cards already operating on a 3.3 V rail. In the implementation, the reference signal enters the PLL section and selected differential outputs feed compatible receiver circuits through controlled-impedance traces. Because the device is obsolete, its use is most appropriate for maintaining a qualified legacy line card rather than creating a new platform. Thermal exposure and supply integrity should be reviewed at each clock domain, with decoupling placed close to the supply and ground pins.

🌐

Network Switching Equipment

The SY89535LHC can provide a common programmable clock for switching and line-processing systems operating across multiple interface rates. Its output range of 33 MHz to 500 MHz, together with LVDS and LVPECL output choices, allows clock distribution to use the signaling convention preferred by each receiver domain. PLL bypass gives the design another clocking path when a direct reference arrangement is required. For implementation, place the IC close to the clock-distribution region, preserve differential-pair geometry, and avoid routing clock nets through noisy power areas. Because the component is obsolete, an existing design can retain its proven clock architecture, but a new network platform should prioritize an active lifecycle part with documented software or register compatibility.

📺

High-Speed Data Conversion

The SY89535LHC fits clocking networks for high-speed ADC and DAC systems that require low-skew differential clocks. Its programmable output span from 33 MHz to 500 MHz supports converter sampling-clock and interface-clock requirements, while LVDS and LVPECL outputs accommodate different converter clock-input conventions. The device synthesizes the required frequency from its reference and provides multiple fanout paths from one clock source. In a converter board, route the chosen differential output directly toward the clock-input pins, maintain continuous reference planes, and account for input capacitance and return-path discontinuities. Confirm converter setup-and-hold requirements against the complete clock timing specification before release. Obsolete status makes this choice most suitable for maintaining an existing converter platform.

🔧

Test and Measurement Equipment

The SY89535LHC can serve as a programmable clock source in instrumentation that must exercise multiple high-speed interfaces with deterministic frequencies. Its 33 MHz to 500 MHz range and differential LVDS or LVPECL outputs are useful for parallel test channels, high-speed interface fixtures, and clock-sensitive measurement systems. The PLL bypass mode can support systems requiring an externally established reference without multiplication. Board implementation should isolate clock outputs from high-current switching stages, use short low-skew routes, and maintain consistent termination on every active output. For legacy analyzers and testers, retaining the exact 64-pin TQFP clock arrangement avoids unnecessary board changes. For new instrumentation, compare active alternatives before committing to an obsolete supply-chain risk.

🖥️

Processor Interface Clocking

The SY89535LHC can generate a programmable differential clock for legacy processor, serializer, and accelerator interfaces requiring rates within the 33 MHz to 500 MHz range. Combining a PLL-based synthesizer with differential output drivers allows one reference to feed several related clock domains. LVDS or LVPECL selection must match the receiving device's input thresholds and termination network. The clock source should be positioned near the relevant receivers, with matched differential routing and a continuous ground reference to control skew. For systems with detailed input-jitter limits, measure the complete source-to-receiver clock eye and include board loss in the timing budget. The obsolete lifecycle status makes this approach appropriate primarily for extending the service life of an existing processor board.

🏭

Industrial Communication Equipment

The SY89535LHC can support clock distribution in industrial communication equipment that mixes legacy differential interfaces with newer control logic. The programmable output range of 33 MHz to 500 MHz covers several industrial fieldbus, backplane, and data-link clock requirements, while multiple input formats ease integration with existing reference sources. Its 3.3 V supply is suitable for many controller boards, although the 0°C to +85°C operating range must be checked against the enclosure's temperature environment. For reliable deployment, use controlled-impedance PCB routing, verify differential termination, and place bypass capacitors adjacent to the supply pins. Since the SY89535LHC is obsolete, it is most suitable for sustaining installed equipment under a controlled component-change process rather than broad deployment across new industrial platforms.

What is the SY89535LHC?
The SY89535LHC is a 3.3 V programmable bus-clock synthesizer from Microchip Technology. According to the Microchip manufacturer datasheet, it combines clock synthesis, PLL bypass capability, fanout circuitry, and differential LVDS or LVPECL outputs in a 64-pin TQFP package. Its primary role is generating and distributing high-speed clocks for communications, networking, data-conversion, and test equipment.
What frequency range does the SY89535LHC support?
The SY89535LHC supports output frequencies from 33 MHz to 500 MHz. According to the Microchip manufacturer datasheet description, the programmable LVPECL and LVDS outputs cover this range, while the reference arrangement can use a 160 MHz single-ended or differential signal. Exact divider and multiplier combinations should be selected from the programming tables in the manufacturer datasheet.
What output standards are available on the SY89535LHC?
The SY89535LHC provides differential LVDS and LVPECL clock outputs. According to the Microchip manufacturer datasheet, these high-speed differential formats support low-noise distribution over controlled-impedance PCB traces. The selected output standard also determines the required termination, signal amplitude, trace geometry, and maximum clock rate for the target interface.
Where can I download the SY89535LHC datasheet PDF?
The SY89535LHC datasheet PDF is accessible through the datasheet link on this page and through the Microchip document listing. The document identifies the device as a 3.3 V, 33 MHz to 500 MHz programmable LVPECL and LVDS bus-clock synthesizer. Review its electrical-characteristics table, PLL programming information, and 64-pin pin-description table before releasing a layout.
Where can I find the SY89535LHC pinout?
The SY89535LHC pinout is documented in the manufacturer datasheet's pin-description and package drawings for the 64-pin TQFP package. Use that table to identify reference inputs, PLL control signals, configuration pins, supply rails, ground connections, and each differential output. The corresponding 64-pin package diagram on this page follows the TQFP-64 outline but does not replace the manufacturer pin-function table.
Is the SY89535LHC currently active?
No. The SY89535LHC is identified as obsolete in the product record for this part. According to the Microchip manufacturer datasheet listing, the device belongs to the Precision Edge clock-synthesis family and has a 0°C to +85°C operating-temperature range. New designs should compare currently supported clock devices, while legacy use may require a controlled procurement and screening plan.
Can the SY89535LHC operate with PLL bypass?
Yes. The SY89535LHC includes PLL bypass capability in addition to its programmable synthesis function. According to the Microchip manufacturer datasheet, bypass supports clock-distribution arrangements where the incoming reference can be passed through without PLL multiplication. Configuration pins and the reference ratio must still be set correctly for deterministic phase and frequency behavior.
What input logic standards does the SY89535LHC accept?
The SY89535LHC accepts CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL inputs. According to the Microchip manufacturer datasheet specification, this broad input support helps the device operate within mixed-signal clock trees. The input amplitude, common-mode voltage, termination method, and signal polarity must satisfy the requirements for the selected logic standard.
Where can I buy the SY89535LHC?
The obsolete SY89535LHC can be requested through the Request a Quote form on this page. Because the part is obsolete, availability may depend on remaining factory inventory, original-package condition, and traceability requirements. Include the required quantity, acceptable date codes, inspection criteria, and target delivery schedule when requesting a quotation.
What is the price of the SY89535LHC?
The current commercial price for the SY89535LHC is shown through the Request a Quote form on this page. The component is obsolete, so its commercial value can vary substantially with quantity, original packaging, traceability, and inspection requirements. Request a quotation using the exact MPN and state any date-code or condition restrictions needed for the application.
What is the lead time for the SY89535LHC?
The current lead time for the obsolete SY89535LHC must be confirmed through the Request a Quote form on this page. Lead time depends on factory inventory, lot traceability, and the permitted condition of the 64-pin TQFP device. Provide the required quantity and schedule so the sourcing response can reflect the actual obsolete-part channel and any incoming inspection requirements.
Is the SY89535LHC in stock?
Stock for the obsolete SY89535LHC must be checked through the Request a Quote form on this page. The manufacturer identifies the device as obsolete, and no current manufacturer-stock statement is presented for this listing. A sourcing response should distinguish allocated inventory from immediately shippable material and confirm original packaging, date code, and traceability.
What can replace the SY89535LHC?
A direct drop-in replacement for the SY89535LHC must use the identical 64-pin TQFP footprint, preserve pin-to-pin signal assignments, and reproduce the required PLL, reference, LVDS, LVPECL, and output-frequency functions. The manufacturer cross-reference results do not identify a verified drop-in equivalent. Use the Request a Quote form to discuss a replacement search when maintaining an existing 64-pin TQFP layout is mandatory.
Is there a Microchip equivalent for the SY89535LHC?
No verified Microchip drop-in equivalent is identified for the SY89535LHC in the available cross-reference results. Microchip's cross-reference search can compare the obsolete part with newer family members, but a candidate must still be checked for exact package dimensions, pin assignments, supply voltage, reference requirements, output count, and programming interface. Use the manufacturer cross-reference search and the 64-pin pin table for formal qualification.
When should I choose the SY89535LHC instead of a newer clock generator?
Choose the SY89535LHC only when an existing design requires its exact reference architecture, output arrangement, and 64-pin TQFP footprint and the obsolete part can be obtained with acceptable traceability. For new designs, select a currently supported clock generator with documented electrical equivalence and an appropriate migration path. The SY89535LHC offers 33 MHz to 500 MHz operation and LVDS/LVPECL outputs, but lifecycle status outweighs those benefits when a redesign is practical.

Datos de referencia de ingeniería para SY89535LHC — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the SY89535LHC only when maintaining an existing 64-pin TQFP design requires the same 3.3 V supply, 33 MHz to 500 MHz output range, PLL-bypass function, and differential LVDS/LVPECL output arrangement. Its broad input-standard support and integrated synthesizer-plus-fanout architecture can simplify a legacy clock tree that cannot tolerate a footprint or signal-role change. For new equipment, however, its obsolete lifecycle status creates continuity and inspection risk. Select an active clock generator unless exact board compatibility is mandatory. No verified drop-in alternatives were identified, so a replacement should not be treated as interchangeable without checking package dimensions, all 64 pin assignments, programming behavior, output counts, reference ratios, termination requirements, and timing performance. For a supported redesign, compare modern clock generators by output range, jitter, low-power modes, reference architecture, package size, and long-term supply status.

Comparación con alternativas

Parámetro Este producto
Brand Microchip Technology
Package 64-pin TQFP
Supply Voltage 3.3 V
Output Frequency Range 33 MHz to 500 MHz
Reference Input 160 MHz single-ended or differential
Output Standards LVDS and LVPECL
Input Standards CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL
PLL Yes, with bypass
Operating Temperature 0°C to +85°C
Lifecycle Status Obsolete

Notas de diseño

Route LVDS and LVPECL outputs as controlled-impedance differential pairs over a continuous ground plane. Keep the pairs free of plane splits, test pads, and abrupt width changes, and match their routed lengths according to the receiver's allowable skew. Place the clock synthesizer close to the clock-consuming circuits to reduce trace loss and sensitivity to adjacent switching noise.

Decouple the 3.3 V supply close to the device's power and ground pins with the capacitance values specified by the manufacturer. Keep high-current switching loops and inductors away from reference and output routing. If the oscillator or PLL supplies a separate internal branch, follow the manufacturer connection and bypass guidance rather than combining unrelated return currents under the clock IC.

Do not treat the obsolete lifecycle designation as proof that every remaining inventory unit is production-ready. Specify acceptable package condition, marking consistency, date-code policy, bake requirements, and inspection criteria. Confirm the 64-pin TQFP pin assignments, reference ratio, output enable behavior, and unused-pin treatment in the manufacturer pin-description table before reusing the device on a new board.

Validate the complete clock path with an oscilloscope or clock-domain analyzer, including source amplitude, differential edge rate, jitter, and receiver eye margin. Do not rely on nominal output frequency alone. Termination values and output enable states must match the selected LVDS or LVPECL interface, and any PLL bypass transition should be checked for phase continuity at the system level.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The product records identify the SY89535LHC as obsolete but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The device is a commercial clock IC rather than an automotive-qualified AEC-Q100 product in the cited records.

Búsquedas relacionadas

SY89535LHC datasheet SY89535LHC pinout SY89535LHC datasheet pdf SY89535LHC equivalent SY89535LHC replacement SY89535LHC cross reference SY89535LHC 500MHz clock synthesizer SY89535LHC LVPECL LVDS outputs SY89535LHC 64 TQFP SY89535LHC obsolete replacement Microchip SY89535LHC price SY89535LHC buy online

Componentes & términos relacionados

Microchip Technology SY89535LHC Precision Edge programmable bus-clock synthesizer clock synthesizer frequency synthesizer phase-locked loop PLL PLL bypass clock and timing IC semiconductor LVDS LVPECL CMOS HSTL LVTTL SSTL 64-pin TQFP TQFP-64 surface-mount package differential clock 3.3 V supply 33 MHz to 500 MHz jitter
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ