SY89825UHG - 2 GHz 2:22 Clock Fanout Buffer | Microchip Technology
N.º de pieza: SY89825UHG ✓ ActivoSY89825UHG Descripción general
A clock fanout buffer is a type of clock buffer and clock driver. Its function is to replicate a single input clock across multiple output paths, increasing drive capacity while preserving timing relationships between distributed clocks. In the system hierarchy, the SY89825UHG belongs to the clock and timing IC category, specifically the clock buffer and driver family used within digital, communications, and test systems.
The verified product information identifies the SY89825UHG as a 2:22 clock fanout buffer with LVDS and LVPECL inputs and LVPECL outputs. Its 2 GHz maximum frequency makes it suitable for high-speed clock distribution, data-converter clocking, networking equipment, and other systems requiring multiple synchronized clock outputs. The 64-pin TQFP exposed-pad package provides a defined PCB footprint and exposed thermal area for thermal management.
The SY89825UHG is particularly useful when a design must distribute one clock source across many loads while maintaining compatible electrical signaling. The input stage accepts differential signaling, while the output stage uses LVPECL output signaling. Differential clock distribution can reduce susceptibility to common-mode noise and is widely used in high-speed digital and communications equipment. The device also supports clock multiplexing and signal translation within the same package.
Designers should pay close attention to input and output termination, power-supply decoupling, clock-routing geometry, and exposed-pad thermal management. Differential transmission lines should be routed with controlled impedance, and unused outputs should be handled according to the manufacturer’s recommended output-termination and test configuration. The exposed pad should be connected to the appropriate ground plane using the package land pattern and thermal-via pattern specified by Microchip Technology.
SY89825UHG is positioned for applications where a broad fanout and high operating frequency are more important than a small package or low pin count. It is especially relevant to parallel clock trees, high-speed backplanes, communication equipment, instrumentation, and digital processing platforms. Request current lifecycle, lead-time, and sourcing information through the Request a Quote form on this page.
Alternativas directas para SY89825UHG — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
SY89825UHY
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
SY89825UHG Especificaciones
| Device Type | Clock fanout buffer, multiplexer, and translator IC |
| Fanout Ratio | 2:22 |
| Maximum Frequency | 2 GHz |
| Input Signal Type | LVDS, LVPECL |
| Output Signal Type | LVPECL |
| Número de salidas | 22 outputs |
| Encapsulado | 64-pin TQFP with exposed pad |
| Tipo de montaje | Surface mount |
| Application Category | Clock distribution and signal routing |
| Clock Distribution Function | Single-source distribution to 22 outputs |
| Differential Input Support | Yes |
| Output Logic Standard | LVPECL |
Guía de configuración de pines de SY89825UHG 64-pin tqfp with exposed pad
Configuración de pines para SY89825UHG (encapsulado 64-pin tqfp with exposed pad). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para SY89825UHG.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SY89825UHG es adecuado para 6 aplicacións: Parallel High-Speed Clock Tree, Telecommunications Backplane Distribution, Data Converter Clocking, Test and Measurement Instrumentation, Industrial Control and Automation, RF and High-Speed Interface Support.
Parallel High-Speed Clock Tree
The SY89825UHG fits parallel clock-tree designs because it distributes one clock source across 22 outputs with a 2:22 fanout ratio and supports operation up to 2 GHz. Each LVPECL output can feed a separate clock branch, reducing the number of cascaded buffer stages required in wide systems. Controlled-impedance routing and manufacturer-recommended termination are essential because unmatched differential clock paths can distort edge rate and increase jitter. The exposed pad also provides a defined thermal path when many outputs drive terminated loads. Designers should assign outputs according to the pin-description table and reserve short bypass connections to the appropriate supply pins.
Recomendado
Telecommunications Backplane Distribution
The SY89825UHG is suitable for telecommunications backplane clock distribution because its 22 LVPECL outputs provide broad fanout while its inputs accept LVDS or LVPECL signaling. The 2 GHz maximum frequency supports demanding communication-clock environments, while the multiplexer and translator functions can simplify systems that must route or level-shift clocks between functional blocks. Differential routing reduces sensitivity to common-mode noise, but launch and receive termination must follow the manufacturer’s application guidance. Use controlled-impedance board layers, minimize stubs, and place any required input or output termination close to the device pins to preserve signal integrity.
Recomendado
Data Converter Clocking
The SY89825UHG can provide synchronized LVPECL clock outputs to multiple data-converter or digital-processing channels. Its 22 outputs allow parallel sampling or processing subsystems to share a common source without adding another external fanout stage. The 2 GHz operating ceiling makes the device relevant to high-speed conversion systems, while LVDS input support offers flexibility when the source clock originates from a different logic level. Performance depends on matched routing and correct termination across every branch. Designers should use the pin-description table to assign clock outputs and isolate unused channels according to the manufacturer’s recommended configuration.
Recomendado
Test and Measurement Instrumentation
The SY89825UHG is appropriate for instrumentation that requires a central clock to reach many acquisition, conversion, or processing channels. Twenty-two LVPECL outputs provide substantial distribution capacity, and the 2 GHz maximum frequency supports high-speed test architectures. The device can therefore reduce clock-tree depth, improve routing flexibility, and keep clock branches close to their intended loads. Differential clock routing should maintain a controlled impedance and appropriate spacing to limit crosstalk. Thermal management should account for the TQFP exposed pad by following the package land pattern and connecting it to a ground plane with the recommended thermal-via arrangement.
Recomendado
Industrial Control and Automation
The SY89825UHG can serve industrial control and automation platforms that distribute a common high-speed clock to multiple processors, converters, interface controllers, or acquisition circuits. Its wide 22-output fanout reduces the need for multiple external clock buffers, while LVDS input and LVPECL output support flexible source and load interfacing. In an industrial enclosure, keep clock traces away from switching-power-node areas and maintain a continuous reference plane for predictable differential behavior. Validate timing margins at every clock branch, use the recommended terminations, and connect the exposed pad to the package ground structure to improve heat dissipation.
Recomendado
RF and High-Speed Interface Support
The SY89825UHG is useful as a local clock-distribution element near RF, high-speed interface, or mixed-signal subsystems that require multiple synchronized LVPECL clock outputs. Its 2:22 fanout architecture supports several parallel functional blocks from one clock reference, while differential inputs can accommodate LVDS or LVPECL source signaling. Keeping distribution local to sensitive circuitry can reduce clock skew between destinations when routing is symmetrical. Use equal-length or intentionally matched paths where timing relationships matter, avoid routing through noisy power stages, and apply the manufacturer’s termination values to preserve edge quality and minimize reflections.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para SY89825UHG — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | SY89825UHY |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP with exposed pad | TQFP-64 |
| Device Type | Clock fanout buffer, multiplexer, translator IC | Clock fanout buffer |
| Mounting Type | Surface mount | Surface mount |
Diferenciadores clave
- Wide clock fanout in one device (frente a SY89825UHY)
- High-speed differential clock distribution (frente a SY89825UHY)
- Integrated multiplexing and translation (frente a SY89825UHY)
Notas de diseño
Use the 64-pin TQFP exposed-pad land pattern from the manufacturer documentation. Connect the exposed pad to the appropriate ground plane and use the recommended thermal-via arrangement to lower junction temperature. Place decoupling capacitance close to the associated supply and ground pins, and avoid routing high-speed clock traces through noisy power-stage areas.
Route LVDS and LVPECL connections as controlled-impedance differential pairs with continuous reference planes. Keep trace spacing and geometry consistent, minimize stubs, and apply the manufacturer-specified source and termination networks. Because the SY89825UHG provides 22 outputs, equal routing practices across clock branches help control skew and edge-rate distortion.
Plan the clock fanout as a symmetric tree rather than a long serial chain. Assign nearby destinations to nearby outputs where the pinout permits, and match branch geometries when devices must receive closely related clocks. Keep passive termination components close to their associated pins so component placement does not add appreciable unequal delay to the distributed clock paths.
Do not infer a pin assignment from another 64-pin TQFP clock IC. Use the SY89825UHG pin-description table to distinguish supplies, grounds, clock inputs, and all 22 outputs. Confirm the behavior of unused outputs and any required enable or test settings before fabrication, and verify the exact package suffix against the PCB footprint.
Información de cumplimiento
Compliance status requires confirmation from the current Microchip Technology product documentation or a formal supplier declaration.